mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Linkui Xiao <xiaolinkui@126.com>
To: maxime.chevallier@bootlin.com, andrew+netdev@lunn.ch,
	davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
	pabeni@redhat.com, mcoquelin.stm32@gmail.com,
	alexandre.torgue@foss.st.com
Cc: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Linkui Xiao <xiaolinkui@kylinos.cn>,
	stable@vger.kernel.org
Subject: [PATCH net] net: stmmac: do not cache the new TSO MSS before it reaches the DMA
Date: Thu, 17 Sep 2026 20:42:34 +0800	[thread overview]
Message-ID: <20260917124234.1348673-1-xiaolinkui@126.com> (raw)

From: Linkui Xiao <xiaolinkui@kylinos.cn>

stmmac_tso_xmit() fills the MSS context descriptor and stores the new
MSS in tx_q->mss right away, but the descriptor only gets its OWN bit
much later, right before the frame is handed to the DMA. Every error
path in between - the dma_map_single() of the linear part and the
skb_frag_dma_map() of each fragment - returns with tx_q->mss already
updated while the MAC is still programmed with the previous MSS; the
abandoned context descriptor is later reclaimed by stmmac_tx_clean().

The next skb carrying the same MSS then compares equal to the cached
value, so no context descriptor is emitted and the hardware segments
the TCP stream with a stale MSS, generating frames whose payload size
does not match what the stack accounted for.

Only update tx_q->mss once the context descriptor has been given to the
DMA so that the cached value always describes what the hardware is
actually programmed with.

Fixes: f748be531d70 ("stmmac: support new GMAC4")
Cc: stable@vger.kernel.org
Signed-off-by: Linkui Xiao <xiaolinkui@kylinos.cn>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index af2d38a2bb3d..a8f94cd6abb4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -4563,7 +4563,6 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
 			mss_desc = &tx_q->dma_tx[tx_q->cur_tx];
 
 		stmmac_set_mss(priv, mss_desc, mss);
-		tx_q->mss = mss;
 		tx_q->cur_tx = STMMAC_NEXT_ENTRY(tx_q->cur_tx,
 						priv->dma_conf.dma_tx_size);
 		WARN_ON(tx_q->tx_skbuff[tx_q->cur_tx]);
@@ -4714,6 +4713,7 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
 		 */
 		dma_wmb();
 		stmmac_set_tx_owner(priv, mss_desc);
+		tx_q->mss = mss;
 	}
 
 	if (netif_msg_pktdata(priv)) {
-- 
2.25.1


             reply	other threads:[~2026-09-17 12:44 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-17 12:42 Linkui Xiao [this message]
2026-09-17 17:37 ` Lorenzo Bianconi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260917124234.1348673-1-xiaolinkui@126.com \
    --to=xiaolinkui@126.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=maxime.chevallier@bootlin.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=stable@vger.kernel.org \
    --cc=xiaolinkui@kylinos.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®