mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Paul Elder <paul.elder+renesas@ideasonboard.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>,
	Stephen Boyd <sboyd@kernel.org>,
	Brian Masney <bmasney+clk@redhat.com>,
	Jerome Brunet <jbrunet+clk@baylibre.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Magnus Damm <magnus.damm@gmail.com>,
	Ulf Hansson <ulfh@kernel.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
	linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-media@vger.kernel.org
Subject: Re: [PATCH 05/10] arm64: renesas: r8a78000: Add VSP[BI] nodes
Date: Fri, 18 Sep 2026 04:21:53 +0300	[thread overview]
Message-ID: <20260918012153.GE145152@killaraus.ideasonboard.com> (raw)
In-Reply-To: <20260917-epaul-v7-3-rc1-x5h-vsp-fcp-v1-5-4c72d4e086dd@ideasonboard.com>

On Thu, Sep 17, 2026 at 09:04:44PM +0900, Paul Elder wrote:
> Add DT nodes for the VSPB and VSPI IP cores in the R-Car X5H Soc.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Signed-off-by: Paul Elder <paul.elder+renesas@ideasonboard.com>
> ---
>  arch/arm64/boot/dts/renesas/r8a78000.dtsi | 99 +++++++++++++++++++++++++++++++
>  1 file changed, 99 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a78000.dtsi b/arch/arm64/boot/dts/renesas/r8a78000.dtsi
> index 2f8886f8b6545026397fd83969882f8c62afa9d3..f90b869579d384e3fc13d0a13625b7cddaac2868 100644
> --- a/arch/arm64/boot/dts/renesas/r8a78000.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a78000.dtsi
> @@ -1072,6 +1072,105 @@ fcpvb4: fcp@c503c000 {
>  			resets = <&mdlc_vio 0x106>;
>  		};
>  
> +		vspi0: vsp@c5080000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc5080000 0 0x8000>;
> +			interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;

Same comment as for 04/10.

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

> +			power-domains = <&mdlc_vio 0x07 0xfe>;
> +			resets = <&mdlc_vio 0xfe>;
> +
> +			renesas,fcp = <&fcpvi0>;
> +		};
> +
> +		vspi1: vsp@c5088000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc5088000 0 0x8000>;
> +			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;
> +			power-domains = <&mdlc_vio 0x07 0xff>;
> +			resets = <&mdlc_vio 0xff>;
> +
> +			renesas,fcp = <&fcpvi1>;
> +		};
> +
> +		vspi2: vsp@c5090000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc5090000 0 0x8000>;
> +			interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;
> +			power-domains = <&mdlc_vio 0x07 0x100>;
> +			resets = <&mdlc_vio 0x100>;
> +
> +			renesas,fcp = <&fcpvi2>;
> +		};
> +
> +		vspi3: vsp@c5098000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc5098000 0 0x8000>;
> +			interrupts = <GIC_SPI 646 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;
> +			power-domains = <&mdlc_vio 0x07 0x101>;
> +			resets = <&mdlc_vio 0x101>;
> +
> +			renesas,fcp = <&fcpvi3>;
> +		};
> +
> +		vspb0: vsp@c50c0000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc50c0000 0 0x8000>;
> +			interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;
> +			power-domains = <&mdlc_vio 0x07 0xf9>;
> +			resets = <&mdlc_vio 0xf9>;
> +
> +			renesas,fcp = <&fcpvb0>;
> +		};
> +
> +		vspb1: vsp@c50c8000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc50c8000 0 0x8000>;
> +			interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;
> +			power-domains = <&mdlc_vio 0x07 0xfa>;
> +			resets = <&mdlc_vio 0xfa>;
> +
> +			renesas,fcp = <&fcpvb1>;
> +		};
> +
> +		vspb2: vsp@c50d0000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc50d0000 0 0x8000>;
> +			interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;
> +			power-domains = <&mdlc_vio 0x07 0xfb>;
> +			resets = <&mdlc_vio 0xfb>;
> +
> +			renesas,fcp = <&fcpvb2>;
> +		};
> +
> +		vspb3: vsp@c50d8000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc50d8000 0 0x8000>;
> +			interrupts = <GIC_SPI 621 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;
> +			power-domains = <&mdlc_vio 0x07 0xfc>;
> +			resets = <&mdlc_vio 0xfc>;
> +
> +			renesas,fcp = <&fcpvb3>;
> +		};
> +
> +		vspb4: vsp@c50e0000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xc50e0000 0 0x8000>;
> +			interrupts = <GIC_SPI 622 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg R8A78000_CPG_SGD4_VIO_DP_OTHER>;
> +			power-domains = <&mdlc_vio 0x07 0xfd>;
> +			resets = <&mdlc_vio 0xfd>;
> +
> +			renesas,fcp = <&fcpvb4>;
> +		};
> +
>  		mdlc_cmnn: system-controller@ca410000 {
>  			compatible = "renesas,r8a78000-mdlc";
>  			reg = <0 0xca410000 0 0x1000>;

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2026-09-18  1:22 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-17 12:04 [PATCH 00/10] media: rcar-fcp, vsp1: Enable on R-Car X5H Paul Elder
2026-09-17 12:04 ` [PATCH 01/10] dt-bindings: clock: renesas,r8a78000-cpg: Add CPG_SGD4_VIO_DP_{TX,OTHER} Paul Elder
2026-09-18  1:03   ` Laurent Pinchart
2026-09-17 12:04 ` [PATCH 02/10] clk: renesas: r8a78000: Add clock for FCPV and VSP for SCP FW SDKv4.36 Paul Elder
2026-09-18  1:11   ` Laurent Pinchart
2026-09-17 12:04 ` [PATCH 03/10] pmdomain: renesas: r8a78000: Add maps for VIO " Paul Elder
2026-09-18  1:15   ` Laurent Pinchart
2026-09-17 12:04 ` [PATCH 04/10] arm64: renesas: r8a78000: Add FCPV[BI] nodes Paul Elder
2026-09-18  1:18   ` Laurent Pinchart
2026-09-17 12:04 ` [PATCH 05/10] arm64: renesas: r8a78000: Add VSP[BI] nodes Paul Elder
2026-09-18  1:21   ` Laurent Pinchart [this message]
2026-09-17 12:04 ` [PATCH 06/10] media: rcar-fcp: Check device revision at probe time Paul Elder
2026-09-18  1:23   ` Laurent Pinchart
2026-09-17 12:04 ` [PATCH 07/10] media: rcar-fcp: Handle resets Paul Elder
2026-09-18  1:28   ` Laurent Pinchart
2026-09-17 12:04 ` [PATCH 08/10] media: vsp1: Support full VSPB on R-Car M3-W, M3-N and E3 Paul Elder
2026-09-18  1:32   ` Laurent Pinchart
2026-09-17 12:04 ` [PATCH 09/10] media: vsp1: Document X5H SoC ID Paul Elder
2026-09-18  1:32   ` Laurent Pinchart
2026-09-17 12:04 ` [PATCH 10/10] media: rcar-fcp: Add R-Car X5H support Paul Elder
2026-09-18  1:35   ` Laurent Pinchart
2026-09-17 12:17 ` [PATCH 00/10] media: rcar-fcp, vsp1: Enable on R-Car X5H Laurent Pinchart
2026-09-18  1:50 ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260918012153.GE145152@killaraus.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=bmasney+clk@redhat.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=jbrunet+clk@baylibre.com \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mchehab@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=paul.elder+renesas@ideasonboard.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=ulfh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®