From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-wm2-f13.google.com (mail-wm2-f13.google.com [74.125.225.141]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id B63524FE2CF for ; Fri, 18 Sep 2026 14:58:30 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=74.125.225.141 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1789743513; cv=none; b=YRDiFrv0i0tWqejtAn/tqPXFWshUd5tXMsGneOekNgWre07nYf9U48w4JTyFWoBsJ4wX5NndqOnH41q1oQB2ntuFDIrCqxT2Dm/ggcsSfb7Bz18aiS08ESOL0wupmOwkAPDfgxKYiPK3NFzRMk+U89iYLMjwFJkQeIgbG6Wpe3o= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1789743513; c=relaxed/simple; bh=gM3dN3vn0teyG2eo0migns+FOD8Hc/tmEG6a/GRXaWU=; h=From:To:Cc:Subject:Date:Message-ID:MIME-Version; b=iUUKRmeFJZ0i1X+eJjcDrb1lon8gAgBR9oa5pezE6U/8pNXQanbPgSat/uFTNBcSORPTnM5V2AsCvHOV11xwAV2DkPnxUix+mqsgNS15fhdtO5m1YpH7k4/LeH9zVJ5BYpLW1Mk2cTpvyzmE4ualoDCdFSWAu4N2Pw8uDIyrm18= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=As4Ukfbb; arc=none smtp.client-ip=74.125.225.141 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="As4Ukfbb" Received: by mail-wm2-f13.google.com with SMTP id 5b1f17b1804b1-49b912d3920so6093555e9.1 for ; Fri, 18 Sep 2026 07:58:30 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1789743509; x=1790348309; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:from:to:cc:subject:date:message-id:reply-to:content-type; bh=VEqgVyr0IKosewJ1enUgGbXkimIQHDNWyRi2d4RqJp4=; b=As4UkfbbA56uLOkK1Fc4H2XMww/nYoGWu9U16lg2GxtBe/20H3q1l/3rYAv+IJsuiE Xj5d9p4MMnl3OfTrzY6nymlZmBVGst95WLqk2zKzijRqttdZwUDc7VQu+tkITKg0Yy0t Z4WQgfFG+q9n4rwP52FXyHhX9NiQhiZduDtc5uFNEw4wTpcW8Xf3UsHEVL9rYhof2PHE IZ6jKIxl/iZTkLcVmKHseTEiNxbLm6FMB4gSOYVNBFFwkl5IAcq+pI/R43NqCaeAlM8P XbB7lOIsD5oQ3n51+PrEZRuRZ/lzx1oq2Fh17yltTC2bvZCIuy75uoOtFjUM0PmNlcwt cSoA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20260707; t=1789743509; x=1790348309; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:x-gm-gg:x-gm-message-state:from:to:cc:subject:date :message-id:reply-to:content-type; bh=VEqgVyr0IKosewJ1enUgGbXkimIQHDNWyRi2d4RqJp4=; b=Qj4RwQaNMPnMHrrN/Pwv6TKPpldtJU/OxN3dje1Mg2XapWDNDNY84aa71c6Rv9+gnW 5/tQmq4eR5ei9OmRpcMKAw8RfpnpgsHu6KaEvU9uZIP+XPSgzru/oa61ZbdlEnfAQZs6 HW3M9nfD6OT1UP18RK+FUB5EnC7+gB2uw/DkGjBHMJW5Lb4CdrbsuvNw/ofxDz9Aw7uT qfOtsOD8CUSnG0AnqkxMzyXga5KoAtVIzlgmJEOogqezrEPYgP18Q8jvdjuxmagBpvJi hJOUVpLTQAJqa9EbL4T3AMZ142ffQod5wYBBVrL5sm2QG/izv+tbhsWfbeQvMaGVjM6L lw6Q== X-Forwarded-Encrypted: i=1; AKwUvBz0S4Ly3/NU+4u9xcMnHMeoVuex8iTV0g1VBpHWUvCp6GbxG2lymzyZCqoIUujLRCTBt6rV95+Zqryn6/8=@vger.kernel.org X-Gm-Message-State: AFuF++lR7qco6KsXixiKTclfEpYxuIK4UMcwYGDoJafWPWqSouqOg1oq LhfljSs7/ozQ/IBgqa+lBGrqkc25G0o9O4vbQTsR413y+PrvbrRhs06b X-Gm-Gg: AYBFou0Haq0MC+jZwMYegQVg8Bw/tuzq3GUDAwmZkC9PlDJ1ZKdcR9Ix4J6w9OlMShE Vly13F1IaD9hWArAD1DN/lZr0lvkNMxpEVm7DIIiERxDwunxLeUaxAA6YqPTqy4s15jou14jzt3 vE48792KUfsnBB4GjJQf9Pd+OJNXR1hQxt2GqfvFyDijPLJ3/+nS9HQucJgnZ3R1954T56/DKCM txWk8ZtTA5s+sSIglpA+ItaF7vIMd3gT2ctcHxDSZuGv4mKQ1lM9uasn3OpA1KjAGEQQS+e5SXx LH364/sKDFOkG33kvQbeN1bu3X9lJNYgHGFgsucByqyK9iJNQNDZO50tTqrjgVHe546JYTfXsVW 2XB4uCtKjpep5vn6PQgXQw4rco3er3Ag5OX8tAcbnKF8jxjbihSONVrnncc08E9g13yzX8OEYhN sodNYMiisnUXtWjDOl+LUVJ6pjV8ibo4S3hbedGdiMO5KxpwdEOMmyUe3bvzHpQQAdaegMBd6ps csRVv9qRsdibSz2q1jUBBDtWPYm8tSYXUkCbURC28bdlg== X-Received: by 2002:a05:600c:8518:b0:49d:28c4:b304 with SMTP id 5b1f17b1804b1-49fc5741563mr38720975e9.29.1789743508528; Fri, 18 Sep 2026 07:58:28 -0700 (PDT) Received: from localhost.localdomain ([5.176.179.200]) by smtp.gmail.com with ESMTPSA id 5b1f17b1804b1-49fc7d46399sm80345295e9.12.2026.09.18.07.58.26 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 18 Sep 2026 07:58:28 -0700 (PDT) From: Omer PALA To: jic23@kernel.org, dlechner@baylibre.com, nuno.sa@analog.com, andy@kernel.org, robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH] dt-bindings: iio: adc: Add dt binding to xlnx,xadc Date: Fri, 18 Sep 2026 17:58:04 +0300 Message-ID: <20260918145804.26957-1-palaomer100@gmail.com> X-Mailer: git-send-email 2.55.0 Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Add yaml devicetree binding for xlnx,zynq-xadc-1.00.a, xlnx,axi-xadc-1.00.a and xlnx,system-management-wiz-1.3 from xilinx-xadc.txt file. Signed-off-by: Omer PALA --- .../bindings/iio/adc/xilinx-xadc.txt | 141 ---------------- .../bindings/iio/adc/xlnx,xadc.yaml | 159 ++++++++++++++++++ 2 files changed, 159 insertions(+), 141 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/xlnx,xadc.yaml diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt deleted file mode 100644 index f42e18078..000000000 --- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt +++ /dev/null @@ -1,141 +0,0 @@ -Xilinx XADC device driver - -This binding document describes the bindings for the Xilinx 7 Series XADC as well -as the UltraScale/UltraScale+ System Monitor. - -The Xilinx XADC is an ADC that can be found in the Series 7 FPGAs from Xilinx. -The XADC has a DRP interface for communication. Currently two different -frontends for the DRP interface exist. One that is only available on the ZYNQ -family as a hardmacro in the SoC portion of the ZYNQ. The other one is available -on all series 7 platforms and is a softmacro with a AXI interface. This binding -document describes the bindings for both of them since the bindings are very -similar. - -The Xilinx System Monitor is an ADC that is found in the UltraScale and -UltraScale+ FPGAs from Xilinx. The System Monitor provides a DRP interface for -communication. Xilinx provides a standard IP core that can be used to access the -System Monitor through an AXI interface in the FPGA fabric. This IP core is -called the Xilinx System Management Wizard. This document describes the bindings -for this IP. - -Required properties: - - compatible: Should be one of - * "xlnx,zynq-xadc-1.00.a": When using the ZYNQ device - configuration interface to interface to the XADC hardmacro. - * "xlnx,axi-xadc-1.00.a": When using the axi-xadc pcore to - interface to the XADC hardmacro. - * "xlnx,system-management-wiz-1.3": When using the - Xilinx System Management Wizard fabric IP core to access the - UltraScale and UltraScale+ System Monitor. - - reg: Address and length of the register set for the device - - interrupts: Interrupt for the XADC control interface. - - clocks: When using the ZYNQ this must be the ZYNQ PCAP clock, - when using the axi-xadc or the axi-system-management-wizard this must be - the clock that provides the clock to the AXI bus interface of the core. - -Optional properties: - - xlnx,external-mux: - * "none": No external multiplexer is used, this is the default - if the property is omitted. - * "single": External multiplexer mode is used with one - multiplexer. - * "dual": External multiplexer mode is used with two - multiplexers for simultaneous sampling. - - xlnx,external-mux-channel: Configures which pair of pins is used to - sample data in external mux mode. - Valid values for single external multiplexer mode are: - 0: VP/VN - 1: VAUXP[0]/VAUXN[0] - 2: VAUXP[1]/VAUXN[1] - ... - 16: VAUXP[15]/VAUXN[15] - Valid values for dual external multiplexer mode are: - 1: VAUXP[0]/VAUXN[0] - VAUXP[8]/VAUXN[8] - 2: VAUXP[1]/VAUXN[1] - VAUXP[9]/VAUXN[9] - ... - 8: VAUXP[7]/VAUXN[7] - VAUXP[15]/VAUXN[15] - - This property needs to be present if the device is configured for - external multiplexer mode (either single or dual). If the device is - not using external multiplexer mode the property is ignored. - - xnlx,channels: List of external channels that are connected to the ADC - Required properties: - * #address-cells: Should be 1. - * #size-cells: Should be 0. - - The child nodes of this node represent the external channels which are - connected to the ADC. If the property is no present no external - channels will be assumed to be connected. - - Each child node represents one channel and has the following - properties: - Required properties: - * reg: Pair of pins the channel is connected to. - 0: VP/VN - 1: VAUXP[0]/VAUXN[0] - 2: VAUXP[1]/VAUXN[1] - ... - 16: VAUXP[15]/VAUXN[15] - Note each channel number should only be used at most - once. - Optional properties: - * xlnx,bipolar: If set the channel is used in bipolar - mode. - - -Examples: - xadc@f8007100 { - compatible = "xlnx,zynq-xadc-1.00.a"; - reg = <0xf8007100 0x20>; - interrupts = <0 7 4>; - interrupt-parent = <&gic>; - clocks = <&pcap_clk>; - - xlnx,channels { - #address-cells = <1>; - #size-cells = <0>; - channel@0 { - reg = <0>; - }; - channel@1 { - reg = <1>; - }; - channel@8 { - reg = <8>; - }; - }; - }; - - xadc@43200000 { - compatible = "xlnx,axi-xadc-1.00.a"; - reg = <0x43200000 0x1000>; - interrupts = <0 53 4>; - interrupt-parent = <&gic>; - clocks = <&fpga1_clk>; - - xlnx,channels { - #address-cells = <1>; - #size-cells = <0>; - channel@0 { - reg = <0>; - xlnx,bipolar; - }; - }; - }; - - adc@80000000 { - compatible = "xlnx,system-management-wiz-1.3"; - reg = <0x80000000 0x1000>; - interrupts = <0 81 4>; - interrupt-parent = <&gic>; - clocks = <&fpga1_clk>; - - xlnx,channels { - #address-cells = <1>; - #size-cells = <0>; - channel@0 { - reg = <0>; - xlnx,bipolar; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,xadc.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,xadc.yaml new file mode 100644 index 000000000..6031de763 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/xlnx,xadc.yaml @@ -0,0 +1,159 @@ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/xlnx,xadc.yaml# +$schema: http://devicetree.org/schemas/meta-schema.yaml# + +title: Xilinx XADC device driver + +maintainers: + - Omer PALA + +description: | + This binding document describes the bindings for the Xilinx 7 Series XADC as well + as the UltraScale/UltraScale+ System Monitor. + +properties: + compatible: + enum: + - xlnx,zynq-xadc-1.00.a + - xlnx,axi-xadc-1.00.a + - xlnx,system-management-wiz-1.3 + + reg: + description: Address and length of the register set for the device + maxItems: 1 + + interrupts: + description: Interrupt for the XADC control interface. + maxItems: 1 + + clocks: + maxItems: 1 + + interrupt-parent: true + + xlnx,external-mux: + description: Selects the external mux mode. + enum: [none, single, dual] + default: none + + xlnx,external-mux-channel: + description: > + Configures which pair of pins is used to sample data in + external mux mode. + $ref: /schemas/types.yaml#/definitions/uint32 + + xlnx,channels: + type: object + description: List of external channels that are connected to the ADC. + properties: + "#address-cells": + const: 1 + "#size-cells": + const: 0 + patternProperties: + "^channel@[0-9a-f]+$": + type: object + properties: + reg: + description: Pair of pins the channel is connected to + minimum: 0 + maximum: 16 + xlnx,bipolar: + description: If set the channel is used in bipolar mode. + $ref: /schemas/types.yaml#/definitions/flag + required: + - reg + additionalProperties: false + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +allOf: + - if: + properties: + xlnx,external-mux: + const: single + then: + properties: + xlnx,external-mux-channel: + minimum: 0 + maximum: 16 + + - if: + properties: + xlnx,external-mux: + const: dual + then: + properties: + xlnx,external-mux-channel: + minimum: 1 + maximum: 8 + +examples: + - | + soc { + #address-cells = <1>; + #size-cells = <1>; + + xadc@f8007100 { + compatible = "xlnx,zynq-xadc-1.00.a"; + reg = <0xf8007100 0x20>; + interrupts = <0 7 4>; + interrupt-parent = <&gic>; + clocks = <&pcap_clk>; + + xlnx,channels { + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + channel@1 { + reg = <1>; + }; + channel@8 { + reg = <8>; + }; + }; + }; + xadc@43200000 { + compatible = "xlnx,axi-xadc-1.00.a"; + reg = <0x43200000 0x1000>; + interrupts = <0 53 4>; + interrupt-parent = <&gic>; + clocks = <&fpga1_clk>; + + xlnx,channels { + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + xlnx,bipolar; + }; + }; + }; + adc@80000000 { + compatible = "xlnx,system-management-wiz-1.3"; + reg = <0x80000000 0x1000>; + interrupts = <0 81 4>; + interrupt-parent = <&gic>; + clocks = <&fpga1_clk>; + + xlnx,channels { + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + xlnx,bipolar; + }; + }; + }; + }; -- 2.55.0