From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-wm2-f13.google.com (mail-wm2-f13.google.com [74.125.225.141]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id D1945358372 for ; Fri, 18 Sep 2026 17:44:42 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=74.125.225.141 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1789753487; cv=none; b=EOQImQoMDxz+AUP6jxbHsdxRRtkOmCszTNAoMgbFsMmExWSh6QG3tlFNCKCxCOcmvZCJxNdYzYJcX57uUeLHneeBdYdNFx884m9lMSnXDuxNoZdtAWZ+aADUwhFOYsIMG/5WfGGZThhduiCJtSDE91AqvTAdbv0Xddjt7C8pTOQ= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1789753487; c=relaxed/simple; bh=OUN+pfzR5anohMB5Jqn5sg8VfCunB66oixWjJ/x8nhc=; h=From:To:Cc:Subject:Date:Message-ID:MIME-Version; b=uRpMrX0hV8pKUWrQFBboKvKCfmK3SwWVG8Lk4cCo/hsc2qqJbZ4XDYRP0kuI1n1adR58K8WBfdxfYAQWDeVOJzrz4U9JDa5553Kw67L55cBGRphk/jnKiDv1LgMv7cdyl8rRoQQLqWcwytNnA3PChZmos3ioMXDwyB89LSyfq+k= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=CV+2IlBd; arc=none smtp.client-ip=74.125.225.141 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="CV+2IlBd" Received: by mail-wm2-f13.google.com with SMTP id 5b1f17b1804b1-49e79a408deso6282745e9.2 for ; Fri, 18 Sep 2026 10:44:42 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1789753480; x=1790358280; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:from:to:cc:subject:date:message-id:reply-to:content-type; bh=kDUreuc76Q9stUrtsT2uw4I0y03Sjd0Pb3pKM1mRunI=; b=CV+2IlBd+00rYH7F5QmtiS2IlbEzysADWXhg0oiEk4YvASLiLILWa9Dy06aDyN/6YZ NC1ykjjKaIuTGFm+UqLbOG8n9DM0rnCyClnaS/42P1Qe40d1B0/yM086O48uhTs1fzxr fuLwQKHnvPXOvbrovjGUEvqDWpJHJwMw1zTvfK6bYRWGkldDwuAB23q7ahzW6OjfE9hE qI/55z0sJzq8Q+OMzIIHttubc+v62HKanLYIjA+Ic7EXQP8HnJpLqh9HzzZ85UUK0lqU 3GBbs9SLj+Xbmf5RALlu1wzEwSaDsPZPKULs9sNULkTzLn2EPzEVXsCe0nPVjaQLc/GP Y50w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20260707; t=1789753480; x=1790358280; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:x-gm-gg:x-gm-message-state:from:to:cc:subject:date :message-id:reply-to:content-type; bh=kDUreuc76Q9stUrtsT2uw4I0y03Sjd0Pb3pKM1mRunI=; b=NSzUoq2oIop9qBEHzKcU3Rrl9wA0Rg7Zt8jSZLioyjhLqBOQH6n9OZQJVFipYqTzPp bgoKOL3ZKgcWaGiJ7YSeZU1Qo5kOW71kpROI7kHPzuG9kc4fakXmBOYEylmMCOI7M+yJ p6Kc0Qy0/+PjvPYvMGUThl2kpenISlH8YeZmAEwc8gyeKjtJBHhxIEhFbKBZtkPbssdS vhIdKHNHpx/GwI8/0odtnLbwO0FbM9k2D+vK03iiY5CZFTi2JrwZAQP7VqPX7GHrrsK8 M7U+Ooz9HNmNeo0+Dr+RzXGT90gNqA3RLoCoEzCVWLZP8EvuIUuMceuLo6XTtAODtv8p fSzg== X-Forwarded-Encrypted: i=1; AKwUvByQAnwABaxW2t9vfRvbqfFWURfLOSOuBdO/s1yxRlwrx6LlAcvebCZGaVl+DMTbF++/QlVU2TXrVp0V2vg=@vger.kernel.org X-Gm-Message-State: AFuF++m1Vvgbxwk0DEOu7rS7I/QX/KoWC+WBrwPX5BE8qzPuYS+WE9PS b+ewsPtWPDhHn6yfBbj7oXVtfwMpsNwCHlHq3SMwGbPlmb33C1dzZxK3 X-Gm-Gg: AYBFou07nHvqlR1rv5wJa3CCjjB0C9mH4BYH1II43lEZWFROPIu81QUsVKKgrxRoxof 4DCQtAOIWEDaNF9QXCChf5cTRGOj0Byka6QFiSqAvYGzQI591uDbLhp3JRgvJteX2Xf5j1jPheW jd36V40GGiVJqC75a0UMGFGnpsA6areK2C1GI850CF+qq2GsWubJytkvBscl+FjDxGuf+1wgBWB /n6FqOvNxMhN+NwuwmLwWNgEpPpj0kr3gjyk4otzyW7Ou2idY/ItStLGSNoNd55l6UB0tDeyzTm x1ZLiSseSMYMGiqNrxHaJXTtgJ/Ako3SNwwwGGgKBMnE12O8/nhJByqk7armuS3q3ZLJS8wmIN+ bJMSyQ7GrpsO6bYyW0kCB3n3uSwx424mtlkZNxQT7tw8lKHg6UNw4duzBwBNUdRBsjiLM3gjqVJ /5S4CPdDfHyPg0GRD/mqXrpLFtkU++sdgOCyjCBsVvLLL7P6GXHkemSQduwdD5EjVCTjjZKz3qc mVsfj5noI6jzxhBL8WSZi33IAAoxNigOGYmGVIVZWpO4UM= X-Received: by 2002:a05:600c:a013:b0:49e:6891:27a8 with SMTP id 5b1f17b1804b1-49fc574a9bcmr37517585e9.25.1789753479422; Fri, 18 Sep 2026 10:44:39 -0700 (PDT) Received: from localhost.localdomain ([176.220.123.16]) by smtp.gmail.com with ESMTPSA id 5b1f17b1804b1-49fcd0f7e05sm8166525e9.4.2026.09.18.10.44.36 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 18 Sep 2026 10:44:39 -0700 (PDT) From: Omer PALA To: jic23@kernel.org, dlechner@baylibre.com, nuno.sa@analog.com, andy@kernel.org, robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2] dt-bindings: iio: adc: Add dt binding to xlnx,xadc Date: Fri, 18 Sep 2026 20:44:13 +0300 Message-ID: <20260918174413.17155-1-palaomer100@gmail.com> X-Mailer: git-send-email 2.55.0 Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Add yaml devicetree binding for xlnx,zynq-xadc-1.00.a, xlnx,axi-xadc-1.00.a and xlnx,system-management-wiz-1.3 from xilinx-xadc.txt file. Signed-off-by: Omer PALA --- Changes in v2: - Fix logic in xlnx,channels node by adding missing required properties (#address-cells and #size-cells). - Update conditional logic in allOf section to enforce required properties for 'single' and 'dual' external-mux modes. - Add SPDX license identifier header at top of schema file. .../bindings/iio/adc/xilinx-xadc.txt | 141 ------------- .../bindings/iio/adc/xlnx,xadc.yaml | 185 ++++++++++++++++++ 2 files changed, 185 insertions(+), 141 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/xlnx,xadc.yaml diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt deleted file mode 100644 index f42e18078..000000000 --- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt +++ /dev/null @@ -1,141 +0,0 @@ -Xilinx XADC device driver - -This binding document describes the bindings for the Xilinx 7 Series XADC as well -as the UltraScale/UltraScale+ System Monitor. - -The Xilinx XADC is an ADC that can be found in the Series 7 FPGAs from Xilinx. -The XADC has a DRP interface for communication. Currently two different -frontends for the DRP interface exist. One that is only available on the ZYNQ -family as a hardmacro in the SoC portion of the ZYNQ. The other one is available -on all series 7 platforms and is a softmacro with a AXI interface. This binding -document describes the bindings for both of them since the bindings are very -similar. - -The Xilinx System Monitor is an ADC that is found in the UltraScale and -UltraScale+ FPGAs from Xilinx. The System Monitor provides a DRP interface for -communication. Xilinx provides a standard IP core that can be used to access the -System Monitor through an AXI interface in the FPGA fabric. This IP core is -called the Xilinx System Management Wizard. This document describes the bindings -for this IP. - -Required properties: - - compatible: Should be one of - * "xlnx,zynq-xadc-1.00.a": When using the ZYNQ device - configuration interface to interface to the XADC hardmacro. - * "xlnx,axi-xadc-1.00.a": When using the axi-xadc pcore to - interface to the XADC hardmacro. - * "xlnx,system-management-wiz-1.3": When using the - Xilinx System Management Wizard fabric IP core to access the - UltraScale and UltraScale+ System Monitor. - - reg: Address and length of the register set for the device - - interrupts: Interrupt for the XADC control interface. - - clocks: When using the ZYNQ this must be the ZYNQ PCAP clock, - when using the axi-xadc or the axi-system-management-wizard this must be - the clock that provides the clock to the AXI bus interface of the core. - -Optional properties: - - xlnx,external-mux: - * "none": No external multiplexer is used, this is the default - if the property is omitted. - * "single": External multiplexer mode is used with one - multiplexer. - * "dual": External multiplexer mode is used with two - multiplexers for simultaneous sampling. - - xlnx,external-mux-channel: Configures which pair of pins is used to - sample data in external mux mode. - Valid values for single external multiplexer mode are: - 0: VP/VN - 1: VAUXP[0]/VAUXN[0] - 2: VAUXP[1]/VAUXN[1] - ... - 16: VAUXP[15]/VAUXN[15] - Valid values for dual external multiplexer mode are: - 1: VAUXP[0]/VAUXN[0] - VAUXP[8]/VAUXN[8] - 2: VAUXP[1]/VAUXN[1] - VAUXP[9]/VAUXN[9] - ... - 8: VAUXP[7]/VAUXN[7] - VAUXP[15]/VAUXN[15] - - This property needs to be present if the device is configured for - external multiplexer mode (either single or dual). If the device is - not using external multiplexer mode the property is ignored. - - xnlx,channels: List of external channels that are connected to the ADC - Required properties: - * #address-cells: Should be 1. - * #size-cells: Should be 0. - - The child nodes of this node represent the external channels which are - connected to the ADC. If the property is no present no external - channels will be assumed to be connected. - - Each child node represents one channel and has the following - properties: - Required properties: - * reg: Pair of pins the channel is connected to. - 0: VP/VN - 1: VAUXP[0]/VAUXN[0] - 2: VAUXP[1]/VAUXN[1] - ... - 16: VAUXP[15]/VAUXN[15] - Note each channel number should only be used at most - once. - Optional properties: - * xlnx,bipolar: If set the channel is used in bipolar - mode. - - -Examples: - xadc@f8007100 { - compatible = "xlnx,zynq-xadc-1.00.a"; - reg = <0xf8007100 0x20>; - interrupts = <0 7 4>; - interrupt-parent = <&gic>; - clocks = <&pcap_clk>; - - xlnx,channels { - #address-cells = <1>; - #size-cells = <0>; - channel@0 { - reg = <0>; - }; - channel@1 { - reg = <1>; - }; - channel@8 { - reg = <8>; - }; - }; - }; - - xadc@43200000 { - compatible = "xlnx,axi-xadc-1.00.a"; - reg = <0x43200000 0x1000>; - interrupts = <0 53 4>; - interrupt-parent = <&gic>; - clocks = <&fpga1_clk>; - - xlnx,channels { - #address-cells = <1>; - #size-cells = <0>; - channel@0 { - reg = <0>; - xlnx,bipolar; - }; - }; - }; - - adc@80000000 { - compatible = "xlnx,system-management-wiz-1.3"; - reg = <0x80000000 0x1000>; - interrupts = <0 81 4>; - interrupt-parent = <&gic>; - clocks = <&fpga1_clk>; - - xlnx,channels { - #address-cells = <1>; - #size-cells = <0>; - channel@0 { - reg = <0>; - xlnx,bipolar; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,xadc.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,xadc.yaml new file mode 100644 index 000000000..f9b717c29 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/xlnx,xadc.yaml @@ -0,0 +1,185 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/xlnx,xadc.yaml# +$schema: http://devicetree.org/schemas/meta-schema.yaml# + +title: Xilinx XADC device driver + +maintainers: + - Omer PALA + +description: | + This binding document describes the bindings for the Xilinx 7 Series XADC as well + as the UltraScale/UltraScale+ System Monitor. + +properties: + compatible: + enum: + - xlnx,zynq-xadc-1.00.a + - xlnx,axi-xadc-1.00.a + - xlnx,system-management-wiz-1.3 + + reg: + description: Address and length of the register set for the device + maxItems: 1 + + interrupts: + description: Interrupt for the XADC control interface. + maxItems: 1 + + clocks: + maxItems: 1 + + interrupt-parent: true + + xlnx,external-mux: + description: Selects the external mux mode. + enum: [none, single, dual] + default: none + + xlnx,external-mux-channel: + description: > + Configures which pair of pins is used to sample data in + external mux mode. + $ref: /schemas/types.yaml#/definitions/uint32 + + xlnx,channels: + type: object + description: List of external channels that are connected to the ADC. + properties: + "#address-cells": + const: 1 + "#size-cells": + const: 0 + required: + - "#address-cells" + - "#size-cells" + patternProperties: + "^channel@[0-9a-f]+$": + type: object + properties: + reg: + description: Pair of pins the channel is connected to + minimum: 0 + maximum: 16 + xlnx,bipolar: + description: If set the channel is used in bipolar mode. + $ref: /schemas/types.yaml#/definitions/flag + required: + - reg + additionalProperties: false + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +allOf: + - if: + properties: + xlnx,external-mux: + const: none + then: + properties: + xlnx,external-mux-channel: false + + - if: + properties: + xlnx,external-mux: + const: single + then: + properties: + xlnx,external-mux-channel: + minimum: 0 + maximum: 16 + required: + - xlnx,external-mux-channel + + - if: + properties: + xlnx,external-mux: + const: dual + then: + properties: + xlnx,external-mux-channel: + minimum: 1 + maximum: 8 + required: + - xlnx,external-mux-channel + +examples: + - | + soc { + #address-cells = <1>; + #size-cells = <1>; + + xadc@f8007100 { + compatible = "xlnx,zynq-xadc-1.00.a"; + reg = <0xf8007100 0x20>; + interrupts = <0 7 4>; + interrupt-parent = <&gic>; + clocks = <&pcap_clk>; + + xlnx,external-mux = "single"; + xlnx,external-mux-channel = <0>; + + xlnx,channels { + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + channel@1 { + reg = <1>; + }; + channel@8 { + reg = <8>; + }; + }; + }; + xadc@43200000 { + compatible = "xlnx,axi-xadc-1.00.a"; + reg = <0x43200000 0x1000>; + interrupts = <0 53 4>; + interrupt-parent = <&gic>; + clocks = <&fpga1_clk>; + + xlnx,external-mux = "single"; + xlnx,external-mux-channel = <0>; + + xlnx,channels { + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + xlnx,bipolar; + }; + }; + }; + adc@80000000 { + compatible = "xlnx,system-management-wiz-1.3"; + reg = <0x80000000 0x1000>; + interrupts = <0 81 4>; + interrupt-parent = <&gic>; + clocks = <&fpga1_clk>; + + xlnx,external-mux = "single"; + xlnx,external-mux-channel = <0>; + + xlnx,channels { + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + xlnx,bipolar; + }; + }; + }; + }; -- 2.55.0