From: Andre Eikmeyer <dev@deq.rocks>
To: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: linux-wireless@vger.kernel.org, brcm80211@lists.linux.dev,
brcm80211-dev-list.pdl@broadcom.com,
linux-kernel@vger.kernel.org, Andre Eikmeyer <dev@deq.rocks>
Subject: [PATCH] wifi: brcmfmac: handle missing D3 ACK on BCM4377 T2 Macs
Date: Fri, 18 Sep 2026 23:30:14 +0200 [thread overview]
Message-ID: <20260918213014.1890677-1-dev@deq.rocks> (raw)
BCM4377 on the affected T2 Macs does not acknowledge HOST_D3_INFORM.
The current PCIe suspend callback treats this as fatal and aborts system
suspend.
On the affected PCI and DMI combinations, mask the mailbox interrupt,
preserve the bus-down state, and let generic PCI/ACPI suspend proceed. On
resume the existing recovery path tears down and probes the device again
instead of relying on a D0 mailbox transaction.
Tested-on: MacBookAir9,1, MacBookPro15,4, MacBookPro16,3
Signed-off-by: Andre Eikmeyer <dev@deq.rocks>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 42 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 55f4d7b..57bbac1 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -9,6 +9,7 @@
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/interrupt.h>
#include <linux/bcma/bcma.h>
#include <linux/sched.h>
@@ -49,6 +50,40 @@ enum brcmf_pcie_state {
BRCMFMAC_PCIE_STATE_UP
};
+/*
+ * BCM4377 on these T2 Macs never acknowledges HOST_D3_INFORM. The platform
+ * can nevertheless enter and leave system suspend if the PCIe mailbox
+ * interrupt is masked and resume takes the existing cold-reprobe path.
+ */
+static const struct dmi_system_id brcmf_pcie_no_d3_ack_quirk[] = {
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MacBookAir9,1"),
+ },
+ },
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MacBookPro15,4"),
+ },
+ },
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MacBookPro16,3"),
+ },
+ },
+ {}
+};
+
+static bool brcmf_pcie_quirk_no_d3_ack(struct pci_dev *pdev)
+{
+ return pdev->vendor == PCI_VENDOR_ID_BROADCOM &&
+ pdev->device == BRCM_PCIE_4377_DEVICE_ID &&
+ dmi_check_system(brcmf_pcie_no_d3_ack_quirk);
+}
+
BRCMF_FW_DEF(43602, "brcmfmac43602-pcie");
BRCMF_FW_DEF(4350, "brcmfmac4350-pcie");
BRCMF_FW_DEF(4350C, "brcmfmac4350c2-pcie");
@@ -2652,11 +2687,18 @@ static int brcmf_pcie_pm_enter_D3(struct device *dev)
wait_event_timeout(devinfo->mbdata_resp_wait, devinfo->mbdata_completed,
BRCMF_PCIE_MBDATA_TIMEOUT);
if (!devinfo->mbdata_completed) {
+ if (brcmf_pcie_quirk_no_d3_ack(devinfo->pdev)) {
+ dev_info(dev, "D3 ACK missing; masking PCIe mailbox interrupt\n");
+ brcmf_pcie_intr_disable(devinfo);
+ goto done;
+ }
+
brcmf_err(bus, "Timeout on response for entering D3 substate\n");
brcmf_bus_change_state(bus, BRCMF_BUS_UP);
return -EIO;
}
+done:
devinfo->state = BRCMFMAC_PCIE_STATE_DOWN;
return 0;
--
2.55.0
next reply other threads:[~2026-09-18 21:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-18 21:30 Andre Eikmeyer [this message]
2026-09-19 22:05 ` Aditya Garg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260918213014.1890677-1-dev@deq.rocks \
--to=dev@deq.rocks \
--cc=arend.vanspriel@broadcom.com \
--cc=brcm80211-dev-list.pdl@broadcom.com \
--cc=brcm80211@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®