From: Peter Marshall <pm@petermarshall.ca>
To: Sakari Ailus <sakari.ailus@linux.intel.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Benjamin Mugnier <benjamin.mugnier@foss.st.com>,
Sylvain Petinot <sylvain.petinot@foss.st.com>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-media@vger.kernel.org, platform-driver-x86@vger.kernel.org,
"Peter Marshall" <pm@petermarshall.ca>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Dan Scally" <dan.scally@ideasonboard.com>,
"Hans de Goede" <hansg@kernel.org>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v2 00/11] media: i2c: st-vd55g1: Genericize driver and add VD55G0 support
Date: Fri, 18 Sep 2026 18:16:54 -0400 [thread overview]
Message-ID: <20260918221705.323510-1-pm@petermarshall.ca> (raw)
This patch series refactors the STMicroelectronics VD55G1 and VD65G4 image
sensor driver (vd55g1) to abstract sensor differences and adds support for
the VD55G0 monochrome sensor.
The VD55G0 is used as the IR face ID sensor in devices such as the
Microsoft Surface Pro 9, where it is found under ACPI HID `SMO55F0`. It
features a native resolution of 644 x 604 pixels and differs from later
variants in the family in several ways:
* It uses a different native resolution and register addresses mapping,
requiring specification of generational feature differences.
* It lacks support for spatial and temporal HDR.
* It requires an exposure duty cycle limit to keep the illuminator current
within safe levels.
Tested on a Microsoft Surface Pro 9 (an Intel IPU6 platform with ACPI
HID "SMO55F0") running kernel 7.2.0 (changes cherry-picked) and libcamera
0.7.0. Builds successfully on linux-media next.
Key changes from the previous series:
* The vd55g1 module is grown to support the extra hardware instead of
replacing it with a completely new driver.
* The driver now includes a builtin patch array. External firmware loading
is no longer required.
* Lower-level error messages are demoted to the debug level to keep kernel
logs clean and actionable.
* Hardware registers are now fully abstracted, so operational logic never
needs to touch a raw CCI address.
* Changes are broken into logical steps to improve clarity and make
bisection possible.
* Rebased against linux-media next.
Peter Marshall (11):
dt-bindings: media: i2c: st,vd55g1: Move allOf: after required:
media: dt-bindings: i2c: vd55g1: Add vd55g0 compatible
media: ipu-bridge: Add VD55G0 to the list of supported sensors
platform/x86: int3472: Add VD55G0 supply GPIO mapping
media: i2c: st-vd55g1: Default to illuminator on GPIO 1
media: i2c: st,vd55g1: Handle virtual firmware graph endpoints
media: i2c: st-vd55g1: Clean up module error reporting
media: i2c: st-vd55g1: Unify frame timing calculations
media: i2c: st-vd55g1: Abstract sensor models, revisions, and features
media: i2c: st-vd55g1: Use indirect hardware register addressing
media: i2c: st-vd55g1: Support VD55G0 global-shutter image sensor
.../bindings/media/i2c/st,vd55g1.yaml | 34 +-
MAINTAINERS | 1 +
drivers/media/i2c/vd55g1.c | 1667 +++++++++++++----
drivers/media/pci/intel/ipu-bridge.c | 2 +
drivers/platform/x86/intel/int3472/discrete.c | 18 +
5 files changed, 1394 insertions(+), 328 deletions(-)
--
2.55.0
next reply other threads:[~2026-09-18 22:18 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-18 22:16 Peter Marshall [this message]
2026-09-18 22:16 ` [PATCH 01/11] dt-bindings: media: i2c: st,vd55g1: Move allOf: after required: Peter Marshall
2026-09-19 7:04 ` Krzysztof Kozlowski
2026-09-18 22:16 ` [PATCH 02/11] media: dt-bindings: i2c: vd55g1: Add vd55g0 compatible Peter Marshall
2026-09-19 7:06 ` Krzysztof Kozlowski
2026-09-18 22:16 ` [PATCH 03/11] media: ipu-bridge: Add VD55G0 to the list of supported sensors Peter Marshall
2026-09-18 22:16 ` [PATCH 04/11] platform/x86: int3472: Add VD55G0 supply GPIO mapping Peter Marshall
2026-09-18 22:16 ` [PATCH 05/11] media: i2c: st-vd55g1: Default to illuminator on GPIO 1 Peter Marshall
2026-09-18 22:17 ` [PATCH 06/11] media: i2c: st,vd55g1: Handle virtual firmware graph endpoints Peter Marshall
2026-09-18 22:17 ` [PATCH 07/11] media: i2c: st-vd55g1: Clean up module error reporting Peter Marshall
2026-09-18 22:17 ` [PATCH 08/11] media: i2c: st-vd55g1: Unify frame timing calculations Peter Marshall
2026-09-18 22:17 ` [PATCH 09/11] media: i2c: st-vd55g1: Abstract sensor models, revisions, and features Peter Marshall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260918221705.323510-1-pm@petermarshall.ca \
--to=pm@petermarshall.ca \
--cc=benjamin.mugnier@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=dan.scally@ideasonboard.com \
--cc=devicetree@vger.kernel.org \
--cc=hansg@kernel.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=sylvain.petinot@foss.st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®