mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Tyrel Datwyler <tyreld@linux.ibm.com>
To: james.bottomley@hansenpartnership.com, martin.petersen@oracle.com
Cc: linux-scsi@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
	linux-kernel@vger.kernel.org, brking@linux.ibm.com,
	davemarq@linux.ibm.com, Tyrel Datwyler <tyreld@linux.ibm.com>
Subject: [PATCH v2 05/20] scsi: ibmvfc: fix uninitialized _done dereference for TMF events on send failure
Date: Fri, 18 Sep 2026 18:32:51 -0700	[thread overview]
Message-ID: <20260919013306.2948028-6-tyreld@linux.ibm.com> (raw)
In-Reply-To: <20260919013306.2948028-1-tyreld@linux.ibm.com>

In ibmvfc_send_event(), the non-H_CLOSED error path uses a bare else
clause to handle the case where evt->cmnd is NULL, assuming the event
must be a MAD and reassigning evt->done = evt->_done before calling it.

However, SCSI Task Management Function (TMF) events created by
ibmvfc_init_tmf() are initialised with IBMVFC_CMD_FORMAT, not
IBMVFC_MAD_FORMAT. ibmvfc_init_event() only populates evt->_done for
IBMVFC_MAD_FORMAT events; for IBMVFC_CMD_FORMAT events evt->_done is
never set. Since TMF events also have evt->cmnd == NULL (cleared by
ibmvfc_init_event()), they fall through to the bare else branch,
copying the uninitialised evt->_done into evt->done and immediately
calling it — a wild function-pointer dereference that results in a
kernel panic during SCSI error recovery under SAN error conditions.

Fix this by replacing the bare else with
'else if (evt->crq.format == IBMVFC_MAD_FORMAT)', gating the _done
reassignment strictly on the MAD format where evt->_done is guaranteed
to be valid. TMF events (IBMVFC_CMD_FORMAT, cmnd==NULL) no longer reach
this branch; their evt->done (ibmvfc_locked_done wrapping
ibmvfc_sync_completion) remains correct as initialised, allowing the
waiting ibmvfc_cancel_all_sq/mq paths to receive the completion
normally.

Fixes: 848c70852e3f ("ibmvfc: split NVMe support into separate source file and add transport stubs")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
---
 drivers/scsi/ibmvscsi/ibmvfc-core.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc-core.c b/drivers/scsi/ibmvscsi/ibmvfc-core.c
index 728529155ded..e4a21ca6815d 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc-core.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc-core.c
@@ -1859,9 +1859,12 @@ int ibmvfc_send_event(struct ibmvfc_event *evt,
 			evt->done = ibmvfc_vfc_eh_done;
 		} else if (evt->fcp_req || evt->ls_req) {
 			evt->done = ibmvfc_vfc_eh_done;
-		} else {
+		} else if (evt->crq.format == IBMVFC_MAD_FORMAT) {
 			evt->xfer_iu->mad_common.status = cpu_to_be16(IBMVFC_MAD_CRQ_ERROR);
 			evt->done = evt->_done;
+		} else {
+			evt->xfer_iu->cmd.status = cpu_to_be16(IBMVFC_VIOS_FAILURE);
+			evt->xfer_iu->cmd.error = cpu_to_be16(IBMVFC_CRQ_FAILURE);
 		}
 
 		evt->done(evt);
-- 
2.55.0


  parent reply	other threads:[~2026-09-19  1:33 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-19  1:32 [PATCH v2 00/20] scsi: ibmvfc: Fixes and cleanup for NVMe/FC support Tyrel Datwyler
2026-09-19  1:32 ` [PATCH v2 01/20] scsi: ibmvfc: initialize evt->tgt for NVMe FCP commands Tyrel Datwyler
2026-09-19  1:32 ` [PATCH v2 02/20] scsi: ibmvfc: fix trace logging " Tyrel Datwyler
2026-09-19  1:32 ` [PATCH v2 03/20] scsi: ibmvfc: complete NVMe FCP requests on H_CLOSED send failure Tyrel Datwyler
2026-09-19  1:32 ` [PATCH v2 04/20] scsi: ibmvfc: defer NVMe local port registration out of atomic context Tyrel Datwyler
2026-09-19  1:32 ` Tyrel Datwyler [this message]
2026-09-19  1:32 ` [PATCH v2 06/20] scsi: ibmvfc: fix uninitialized shwqs in ibmvfc_purge_requests() Tyrel Datwyler
2026-09-19  1:32 ` [PATCH v2 07/20] scsi: ibmvfc: fix uninitialized status logged on LS abort send failure Tyrel Datwyler
2026-09-19  1:32 ` [PATCH v2 08/20] scsi: ibmvfc: fix inverted suppress-ABTS capability check in NVMe TMF path Tyrel Datwyler
2026-09-19  1:32 ` [PATCH v2 09/20] scsi: ibmvfc: fix infinite reset loop on NULL evt in implicit logout path Tyrel Datwyler
2026-09-19  1:32 ` [PATCH v2 10/20] scsi: ibmvfc: fix u16 overflow of max_cmds in ibmvfc_set_login_info() Tyrel Datwyler
2026-09-19  1:32 ` [PATCH v2 11/20] scsi: ibmvfc: fix UAF and hang in ibmvfc_cancel_all_mq() on send failure Tyrel Datwyler
2026-09-19  1:32 ` [PATCH v2 12/20] scsi: ibmvfc: fix data race on tgt->nvme_remote_port Tyrel Datwyler
2026-09-19  1:32 ` [PATCH v2 13/20] scsi: ibmvfc: make NVMe FCP abort callback asynchronous Tyrel Datwyler
2026-09-19  1:33 ` [PATCH v2 14/20] scsi: ibmvfc: fix UAF and stall in NVMe LS abort callback Tyrel Datwyler
2026-09-19  1:33 ` [PATCH v2 15/20] scsi: ibmvfc: unregister NVMe local port on adapter removal Tyrel Datwyler
2026-09-19  1:33 ` [PATCH v2 16/20] scsi: ibmvfc: fix NVMe local port leak on fabric link bounce Tyrel Datwyler
2026-09-19  1:33 ` [PATCH v2 17/20] scsi: ibmvfc: fix TOCTOU race in ibmvfc_nvme_create_queue() on adapter removal Tyrel Datwyler
2026-09-19  1:33 ` [PATCH v2 18/20] scsi: ibmvfc: fix NVMe sub-queue registration failure disabling SCSI multiqueue Tyrel Datwyler
2026-09-19  1:33 ` [PATCH v2 19/20] scsi: ibmvfc: fix nr_nvme_hw_queues module parameter ignored for NVMe queue sizing Tyrel Datwyler
2026-09-19  1:33 ` [PATCH v2 20/20] scsi: ibmvfc: fix concurrent SCSI and NVMe discover-targets race dropping targets Tyrel Datwyler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260919013306.2948028-6-tyreld@linux.ibm.com \
    --to=tyreld@linux.ibm.com \
    --cc=brking@linux.ibm.com \
    --cc=davemarq@linux.ibm.com \
    --cc=james.bottomley@hansenpartnership.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®