From: yupeng <yupeng0921@gmail.com>
To: Christoph Hellwig <hch@lst.de>, Sagi Grimberg <sagi@grimberg.me>,
Chaitanya Kulkarni <kch@nvidia.com>
Cc: "Tejun Heo" <tj@kernel.org>,
"Johannes Weiner" <hannes@cmpxchg.org>,
"Michal Koutný" <mkoutny@suse.com>,
"Josef Bacik" <josef@toxicpanda.com>,
"Jens Axboe" <axboe@kernel.dk>,
cgroups@vger.kernel.org, linux-block@vger.kernel.org,
linux-nvme@lists.infradead.org, linux-kernel@vger.kernel.org,
"Peng Yu" <yupeng0921@gmail.com>
Subject: [PATCH v2] nvmet: add cgroup_path to charge namespace I/O to a cgroup
Date: Mon, 21 Sep 2026 23:51:15 -0700 [thread overview]
Message-ID: <20260922065115.22508-1-yupeng0921@gmail.com> (raw)
From: Peng Yu <yupeng0921@gmail.com>
Scenario:
* Create multiple nvmet subsystems/namespaces.
* The namespaces are backed by different LVM logical volumes.
* Some of the logical volumes share the same physical volumes.
* The subsystems are exported to different users.
* We should provide each user a specific iops/bps quota, thus a noisy
neighbor won't impact the performance of other logical volumes.
Implementation:
* Add a `cgroup_path` attribute under the nvmet namespace folder, e.g.:
/sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:bdev/namespaces/1/cgroup_path
* We can write a cgroup path to it, then that cgroup will control
the IOs used by the namespace.
* Write an empty string to clear it.
* The cgroup_path could be modified when the namespace is disabled.
* Support both block device backed namespaces and file backed namespaces.
* Only the direct io scenario is supported, enabling a namespace that
has both cgroup_path and buffered_io set fails with -EINVAL.
Test:
1 Load kernel modules.
sudo modprobe brd rd_nr=2 rd_size=1048576
sudo modprobe nvmet
sudo modprobe nvmet_tcp
sudo modprobe nvme_tcp
2 The two brd devices are used for a bdev backed namespace and a file
backed namespace, remember their major/minor.
lsblk --noheadings --nodeps --output NAME,MAJ:MIN,SIZE /dev/ram0 /dev/ram1
ram0 1:0 1G
ram1 1:1 1G
3 Enable the io controller and create two cgroups, one for the bdev
backed namespace, another for the file backed namespace.
echo "+io" | sudo tee /sys/fs/cgroup/cgroup.subtree_control
sudo mkdir -p /sys/fs/cgroup/nvmet-bdev
sudo mkdir -p /sys/fs/cgroup/nvmet-file
4 Create a file system and a file on ram0.
sudo mkfs.ext4 /dev/ram0
sudo mkdir -p /mnt/nvmet-file
sudo mount -o noatime /dev/ram0 /mnt/nvmet-file
sudo dd if=/dev/zero of=/mnt/nvmet-file/ns.img bs=1M count=512 oflag=direct
5 Create the bdev backed subsystem and namespace.
sudo mkdir -p /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:bdev/namespaces/1
echo 1 | sudo tee /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:bdev/attr_allow_any_host
echo /dev/ram1 | sudo tee /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:bdev/namespaces/1/device_path
echo /nvmet-bdev | sudo tee /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:bdev/namespaces/1/cgroup_path
echo 1 | sudo tee /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:bdev/namespaces/1/enable
6 Create the file backed subsystem and namespace.
sudo mkdir -p /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:file/namespaces/1
echo 1 | sudo tee /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:file/attr_allow_any_host
echo /mnt/nvmet-file/ns.img | sudo tee /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:file/namespaces/1/device_path
echo /nvmet-file | sudo tee /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:file/namespaces/1/cgroup_path
echo 1 | sudo tee /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:file/namespaces/1/enable
7 Export the two subsystems to 127.0.0.1.
sudo mkdir -p /sys/kernel/config/nvmet/ports/1
echo ipv4 | sudo tee /sys/kernel/config/nvmet/ports/1/addr_adrfam
echo tcp | sudo tee /sys/kernel/config/nvmet/ports/1/addr_trtype
echo 127.0.0.1 | sudo tee /sys/kernel/config/nvmet/ports/1/addr_traddr
echo 4420 | sudo tee /sys/kernel/config/nvmet/ports/1/addr_trsvcid
sudo ln -s /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:bdev /sys/kernel/config/nvmet/ports/1/subsystems/nqn.2026-09.io.test01:bdev
sudo ln -s /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:file /sys/kernel/config/nvmet/ports/1/subsystems/nqn.2026-09.io.test01:file
8 Connect the two subsystems from 127.0.0.1.
sudo nvme connect -t tcp -a 127.0.0.1 -s 4420 -n nqn.2026-09.io.test01:bdev
sudo nvme connect -t tcp -a 127.0.0.1 -s 4420 -n nqn.2026-09.io.test01:file
sudo udevadm settle
9 Set riops to 20k and run fio.
echo "1:1 riops=20000 wiops=max rbps=max wbps=max" | sudo tee /sys/fs/cgroup/nvmet-bdev/io.max
echo "1:0 riops=20000 wiops=max rbps=max wbps=max" | sudo tee /sys/fs/cgroup/nvmet-file/io.max
sudo fio --name=t --filename=/dev/nvme0n1 --rw=randread --bs=4k --iodepth=32 --numjobs=1 \
--direct=1 --ioengine=libaio --time_based --runtime=10 --ramp_time=3 \
--group_reporting 2>/dev/null | grep -E '^ +(read|write): IOPS'
read: IOPS=20.0k, BW=78.1MiB/s (81.9MB/s)(781MiB/10001msec)
sudo fio --name=t --filename=/dev/nvme1n1 --rw=randread --bs=4k --iodepth=32 --numjobs=1 \
--direct=1 --ioengine=libaio --time_based --runtime=10 --ramp_time=3 \
--group_reporting 2>/dev/null | grep -E '^ +(read|write): IOPS'
read: IOPS=20.0k, BW=78.1MiB/s (81.9MB/s)(781MiB/10001msec)
10 Set rbps to 100M and run fio.
echo "1:1 riops=max wiops=max rbps=104857600 wbps=max" | sudo tee /sys/fs/cgroup/nvmet-bdev/io.max
echo "1:0 riops=max wiops=max rbps=104857600 wbps=max" | sudo tee /sys/fs/cgroup/nvmet-file/io.max
sudo fio --name=t --filename=/dev/nvme0n1 --rw=read --bs=1M --iodepth=32 --numjobs=1 \
--direct=1 --ioengine=libaio --time_based --runtime=10 --ramp_time=3 \
--group_reporting 2>/dev/null | grep -E '^ +(read|write): IOPS'
read: IOPS=97, BW=100MiB/s (105MB/s)(1033MiB/10304msec)
sudo fio --name=t --filename=/dev/nvme1n1 --rw=read --bs=1M --iodepth=32 --numjobs=1 \
--direct=1 --ioengine=libaio --time_based --runtime=10 --ramp_time=3 \
--group_reporting 2>/dev/null | grep -E '^ +(read|write): IOPS'
read: IOPS=97, BW=100MiB/s (105MB/s)(1031MiB/10297msec)
11 Set wiops to 20k and run fio.
echo "1:1 riops=max wiops=20000 rbps=max wbps=max" | sudo tee /sys/fs/cgroup/nvmet-bdev/io.max
echo "1:0 riops=max wiops=20000 rbps=max wbps=max" | sudo tee /sys/fs/cgroup/nvmet-file/io.max
sudo fio --name=t --filename=/dev/nvme0n1 --rw=randwrite --bs=4k --iodepth=32 --numjobs=1 \
--direct=1 --ioengine=libaio --time_based --runtime=10 --ramp_time=3 \
--group_reporting 2>/dev/null | grep -E '^ +(read|write): IOPS'
write: IOPS=20.0k, BW=78.1MiB/s (81.9MB/s)(781MiB/10001msec); 0 zone resets
sudo fio --name=t --filename=/dev/nvme1n1 --rw=randwrite --bs=4k --iodepth=32 --numjobs=1 \
--direct=1 --ioengine=libaio --time_based --runtime=10 --ramp_time=3 \
--group_reporting 2>/dev/null | grep -E '^ +(read|write): IOPS'
write: IOPS=20.0k, BW=78.1MiB/s (81.9MB/s)(781MiB/10001msec); 0 zone resets
12 Set wbps to 100M and run fio.
echo "1:1 riops=max wiops=max rbps=max wbps=104857600" | sudo tee /sys/fs/cgroup/nvmet-bdev/io.max
echo "1:0 riops=max wiops=max rbps=max wbps=104857600" | sudo tee /sys/fs/cgroup/nvmet-file/io.max
sudo fio --name=t --filename=/dev/nvme0n1 --rw=write --bs=1M --iodepth=32 --numjobs=1 \
--direct=1 --ioengine=libaio --time_based --runtime=10 --ramp_time=3 \
--group_reporting 2>/dev/null | grep -E '^ +(read|write): IOPS'
write: IOPS=97, BW=100MiB/s (105MB/s)(1031MiB/10305msec); 0 zone resets
sudo fio --name=t --filename=/dev/nvme1n1 --rw=write --bs=1M --iodepth=32 --numjobs=1 \
--direct=1 --ioengine=libaio --time_based --runtime=10 --ramp_time=3 \
--group_reporting 2>/dev/null | grep -E '^ +(read|write): IOPS'
write: IOPS=97, BW=100MiB/s (105MB/s)(1032MiB/10297msec); 0 zone resets
13 Cleanup the environment.
sudo nvme disconnect -n nqn.2026-09.io.test01:bdev
sudo nvme disconnect -n nqn.2026-09.io.test01:file
sudo udevadm settle
sudo rm -f /sys/kernel/config/nvmet/ports/1/subsystems/nqn.2026-09.io.test01:bdev
sudo rm -f /sys/kernel/config/nvmet/ports/1/subsystems/nqn.2026-09.io.test01:file
sudo rmdir /sys/kernel/config/nvmet/ports/1
echo 0 | sudo tee /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:bdev/namespaces/1/enable
sudo rmdir /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:bdev/namespaces/1
sudo rmdir /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:bdev
echo 0 | sudo tee /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:file/namespaces/1/enable
sudo rmdir /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:file/namespaces/1
sudo rmdir /sys/kernel/config/nvmet/subsystems/nqn.2026-09.io.test01:file
sudo umount /mnt/nvmet-file
sudo rmdir /mnt/nvmet-file
sudo modprobe -r brd
sudo rmdir /sys/fs/cgroup/nvmet-bdev
sudo rmdir /sys/fs/cgroup/nvmet-file
sudo rmmod nvme_tcp
sudo rmmod nvmet_tcp
sudo rmmod nvmet
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Assisted-by: Claude:claude-fable-5 [Claude Code]
Assisted-by: Claude:claude-opus-5 [Claude Code]
---
drivers/nvme/target/configfs.c | 59 ++++++++++++++++++++++++
drivers/nvme/target/core.c | 75 +++++++++++++++++++++++++++++++
drivers/nvme/target/io-cmd-bdev.c | 18 +++++++-
drivers/nvme/target/io-cmd-file.c | 21 ++++++++-
drivers/nvme/target/nvmet.h | 47 +++++++++++++++++++
drivers/nvme/target/zns.c | 1 +
6 files changed, 218 insertions(+), 3 deletions(-)
diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c
index 6286e38436dd..829b92d04ad4 100644
--- a/drivers/nvme/target/configfs.c
+++ b/drivers/nvme/target/configfs.c
@@ -561,6 +561,62 @@ static ssize_t nvmet_ns_device_path_store(struct config_item *item,
CONFIGFS_ATTR(nvmet_ns_, device_path);
+#ifdef CONFIG_BLK_CGROUP
+static ssize_t nvmet_ns_cgroup_path_show(struct config_item *item, char *page)
+{
+ struct nvmet_ns *ns = to_nvmet_ns(item);
+ struct nvmet_subsys *subsys = ns->subsys;
+ ssize_t ret;
+
+ mutex_lock(&subsys->lock);
+ ret = snprintf(page, PAGE_SIZE, "%s\n", ns->cgroup_path ?: "");
+ mutex_unlock(&subsys->lock);
+ return ret;
+}
+
+static ssize_t nvmet_ns_cgroup_path_store(struct config_item *item,
+ const char *page, size_t count)
+{
+ struct nvmet_ns *ns = to_nvmet_ns(item);
+ struct nvmet_subsys *subsys = ns->subsys;
+ size_t len;
+ int ret = count;
+
+ mutex_lock(&subsys->lock);
+
+ if (ns->enabled) {
+ ret = -EBUSY;
+ goto out_unlock;
+ }
+
+ len = strcspn(page, "\n");
+ if (!len) {
+ /* An empty write clears the association. */
+ kfree(ns->cgroup_path);
+ ns->cgroup_path = NULL;
+ goto out_unlock;
+ }
+
+ if (page[0] != '/' || len >= PATH_MAX) {
+ ret = -EINVAL;
+ goto out_unlock;
+ }
+
+ kfree(ns->cgroup_path);
+ ns->cgroup_path = kmemdup_nul(page, len, GFP_KERNEL);
+ if (!ns->cgroup_path) {
+ ret = -ENOMEM;
+ goto out_unlock;
+ }
+
+out_unlock:
+ mutex_unlock(&subsys->lock);
+ return ret;
+}
+
+CONFIGFS_ATTR(nvmet_ns_, cgroup_path);
+#endif /* CONFIG_BLK_CGROUP */
+
#ifdef CONFIG_PCI_P2PDMA
static ssize_t nvmet_ns_p2pmem_show(struct config_item *item, char *page)
{
@@ -833,6 +889,9 @@ static struct configfs_attribute *nvmet_ns_attrs[] = {
&nvmet_ns_attr_buffered_io,
&nvmet_ns_attr_revalidate_size,
&nvmet_ns_attr_resv_enable,
+#ifdef CONFIG_BLK_CGROUP
+ &nvmet_ns_attr_cgroup_path,
+#endif
#ifdef CONFIG_PCI_P2PDMA
&nvmet_ns_attr_p2pmem,
#endif
diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index 43871a8f56ca..3e4972513c3e 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -4,6 +4,7 @@
* Copyright (c) 2015-2016 HGST, a Western Digital Company.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/cgroup.h>
#include <linux/hex.h>
#include <linux/module.h>
#include <linux/random.h>
@@ -474,8 +475,77 @@ void nvmet_put_namespace(struct nvmet_ns *ns)
percpu_ref_put(&ns->ref);
}
+#ifdef CONFIG_BLK_CGROUP
+static int nvmet_blkcg_ns_enable(struct nvmet_ns *ns)
+{
+ struct cgroup_subsys_state *css;
+ struct cgroup *cgrp;
+
+ if (!ns->cgroup_path)
+ return 0;
+
+ /*
+ * Buffered writes will be handled by a separate thread,
+ * these IOs have no namespace/cgroup information at that time,
+ * so we don't support buffered io.
+ */
+ if (ns->buffered_io) {
+ pr_err("cgroup_path is not supported with buffered_io: %s\n",
+ ns->device_path);
+ return -EINVAL;
+ }
+
+ cgrp = cgroup_get_from_path(ns->cgroup_path);
+ if (IS_ERR(cgrp)) {
+ pr_err("failed to resolve cgroup path %s: %ld\n",
+ ns->cgroup_path, PTR_ERR(cgrp));
+ return PTR_ERR(cgrp);
+ }
+
+ css = cgroup_get_e_css(cgrp, &io_cgrp_subsys);
+ if (!css || css->cgroup != cgrp) {
+ pr_err("the io controller is not enabled in cgroup %s\n",
+ ns->cgroup_path);
+ if (css)
+ css_put(css);
+ cgroup_put(cgrp);
+ return -EINVAL;
+ }
+ ns->blkcg_css = css;
+ cgroup_put(cgrp);
+ return 0;
+}
+
+static void nvmet_blkcg_ns_disable(struct nvmet_ns *ns)
+{
+ if (ns->blkcg_css) {
+ css_put(ns->blkcg_css);
+ ns->blkcg_css = NULL;
+ }
+}
+
+static void nvmet_blkcg_ns_free(struct nvmet_ns *ns)
+{
+ kfree(ns->cgroup_path);
+}
+#else
+static inline int nvmet_blkcg_ns_enable(struct nvmet_ns *ns)
+{
+ return 0;
+}
+
+static inline void nvmet_blkcg_ns_disable(struct nvmet_ns *ns)
+{
+}
+
+static inline void nvmet_blkcg_ns_free(struct nvmet_ns *ns)
+{
+}
+#endif /* CONFIG_BLK_CGROUP */
+
static void nvmet_ns_dev_disable(struct nvmet_ns *ns)
{
+ nvmet_blkcg_ns_disable(ns);
nvmet_bdev_ns_disable(ns);
nvmet_file_ns_disable(ns);
}
@@ -602,6 +672,10 @@ int nvmet_ns_enable(struct nvmet_ns *ns)
if (ret)
goto out_unlock;
+ ret = nvmet_blkcg_ns_enable(ns);
+ if (ret)
+ goto out_dev_disable;
+
ret = nvmet_p2pmem_ns_enable(ns);
if (ret)
goto out_dev_disable;
@@ -699,6 +773,7 @@ void nvmet_ns_free(struct nvmet_ns *ns)
up_write(&nvmet_ana_sem);
kfree(ns->device_path);
+ nvmet_blkcg_ns_free(ns);
kfree(ns);
}
diff --git a/drivers/nvme/target/io-cmd-bdev.c b/drivers/nvme/target/io-cmd-bdev.c
index f2d9e8901df4..0014e5ef2853 100644
--- a/drivers/nvme/target/io-cmd-bdev.c
+++ b/drivers/nvme/target/io-cmd-bdev.c
@@ -297,6 +297,7 @@ static void nvmet_bdev_execute_rw(struct nvmet_req *req)
bio = bio_alloc(req->ns->bdev, bio_max_segs(sg_cnt), opf,
GFP_KERNEL);
}
+ nvmet_blkcg_set_bio(req->ns, bio);
bio->bi_iter.bi_sector = sector;
bio->bi_private = req;
bio->bi_end_io = nvmet_bio_done;
@@ -322,6 +323,7 @@ static void nvmet_bdev_execute_rw(struct nvmet_req *req)
bio = bio_alloc(req->ns->bdev, bio_max_segs(sg_cnt),
opf, GFP_KERNEL);
+ nvmet_blkcg_set_bio(req->ns, bio);
bio->bi_iter.bi_sector = sector;
bio_chain(bio, prev);
@@ -358,6 +360,7 @@ static void nvmet_bdev_execute_flush(struct nvmet_req *req)
bio_init(bio, req->ns->bdev, req->inline_bvec,
ARRAY_SIZE(req->inline_bvec), REQ_OP_WRITE | REQ_PREFLUSH);
+ nvmet_blkcg_set_bio(req->ns, bio);
bio->bi_private = req;
bio->bi_end_io = nvmet_bio_done;
@@ -366,10 +369,16 @@ static void nvmet_bdev_execute_flush(struct nvmet_req *req)
u16 nvmet_bdev_flush(struct nvmet_req *req)
{
+ bool associated;
+ int ret;
+
if (!bdev_write_cache(req->ns->bdev))
return 0;
- if (blkdev_issue_flush(req->ns->bdev))
+ associated = nvmet_blkcg_begin(req->ns);
+ ret = blkdev_issue_flush(req->ns->bdev);
+ nvmet_blkcg_end(associated);
+ if (ret)
return NVME_SC_INTERNAL | NVME_STATUS_DNR;
return 0;
}
@@ -380,9 +389,11 @@ static void nvmet_bdev_execute_discard(struct nvmet_req *req)
struct nvme_dsm_range range;
struct bio *bio = NULL;
sector_t nr_sects;
+ bool associated;
int i;
u16 status = NVME_SC_SUCCESS;
+ associated = nvmet_blkcg_begin(ns);
for (i = 0; i <= le32_to_cpu(req->cmd->dsm.nr); i++) {
status = nvmet_copy_from_sgl(req, i * sizeof(range), &range,
sizeof(range));
@@ -394,6 +405,7 @@ static void nvmet_bdev_execute_discard(struct nvmet_req *req)
nvmet_lba_to_sect(ns, range.slba), nr_sects,
GFP_KERNEL, &bio);
}
+ nvmet_blkcg_end(associated);
if (bio) {
bio->bi_private = req;
@@ -431,6 +443,7 @@ static void nvmet_bdev_execute_write_zeroes(struct nvmet_req *req)
struct bio *bio = NULL;
sector_t sector;
sector_t nr_sector;
+ bool associated;
int ret;
if (!nvmet_check_transfer_len(req, 0))
@@ -440,8 +453,11 @@ static void nvmet_bdev_execute_write_zeroes(struct nvmet_req *req)
nr_sector = (((sector_t)le16_to_cpu(write_zeroes->length) + 1) <<
(req->ns->blksize_shift - 9));
+ associated = nvmet_blkcg_begin(req->ns);
ret = __blkdev_issue_zeroout(req->ns->bdev, sector, nr_sector,
GFP_KERNEL, &bio, 0);
+ nvmet_blkcg_end(associated);
+
if (bio) {
bio->bi_private = req;
bio->bi_end_io = nvmet_bio_done;
diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c
index 0b22d183f927..570e65259ad8 100644
--- a/drivers/nvme/target/io-cmd-file.c
+++ b/drivers/nvme/target/io-cmd-file.c
@@ -79,6 +79,8 @@ static ssize_t nvmet_file_submit_bvec(struct nvmet_req *req, loff_t pos,
struct kiocb *iocb = &req->f.iocb;
ssize_t (*call_iter)(struct kiocb *iocb, struct iov_iter *iter);
struct iov_iter iter;
+ bool associated;
+ ssize_t ret;
int rw;
if (req->cmd->rw.opcode == nvme_cmd_write) {
@@ -97,7 +99,10 @@ static ssize_t nvmet_file_submit_bvec(struct nvmet_req *req, loff_t pos,
iocb->ki_filp = req->ns->file;
iocb->ki_flags = ki_flags | iocb->ki_filp->f_iocb_flags;
- return call_iter(iocb, &iter);
+ associated = nvmet_blkcg_begin(req->ns);
+ ret = call_iter(iocb, &iter);
+ nvmet_blkcg_end(associated);
+ return ret;
}
static void nvmet_file_io_done(struct kiocb *iocb, long ret)
@@ -251,7 +256,13 @@ static void nvmet_file_execute_rw(struct nvmet_req *req)
u16 nvmet_file_flush(struct nvmet_req *req)
{
- return errno_to_nvme_status(req, vfs_fsync(req->ns->file, 1));
+ bool associated;
+ int ret;
+
+ associated = nvmet_blkcg_begin(req->ns);
+ ret = vfs_fsync(req->ns->file, 1);
+ nvmet_blkcg_end(associated);
+ return errno_to_nvme_status(req, ret);
}
static void nvmet_file_flush_work(struct work_struct *w)
@@ -274,10 +285,12 @@ static void nvmet_file_execute_discard(struct nvmet_req *req)
int mode = FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE;
struct nvme_dsm_range range;
loff_t offset, len;
+ bool associated;
u16 status = 0;
int ret;
int i;
+ associated = nvmet_blkcg_begin(req->ns);
for (i = 0; i <= le32_to_cpu(req->cmd->dsm.nr); i++) {
status = nvmet_copy_from_sgl(req, i * sizeof(range), &range,
sizeof(range));
@@ -300,6 +313,7 @@ static void nvmet_file_execute_discard(struct nvmet_req *req)
break;
}
}
+ nvmet_blkcg_end(associated);
nvmet_req_complete(req, status);
}
@@ -336,6 +350,7 @@ static void nvmet_file_write_zeroes_work(struct work_struct *w)
int mode = FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE;
loff_t offset;
loff_t len;
+ bool associated;
int ret;
offset = le64_to_cpu(write_zeroes->slba) << req->ns->blksize_shift;
@@ -347,7 +362,9 @@ static void nvmet_file_write_zeroes_work(struct work_struct *w)
return;
}
+ associated = nvmet_blkcg_begin(req->ns);
ret = vfs_fallocate(req->ns->file, mode, offset, len);
+ nvmet_blkcg_end(associated);
nvmet_req_complete(req, ret < 0 ? errno_to_nvme_status(req, ret) : 0);
}
diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h
index dbda55895f4f..1ef7be97a244 100644
--- a/drivers/nvme/target/nvmet.h
+++ b/drivers/nvme/target/nvmet.h
@@ -21,6 +21,7 @@
#include <linux/radix-tree.h>
#include <linux/t10-pi.h>
#include <linux/kfifo.h>
+#include <linux/kthread.h>
#define NVMET_DEFAULT_VS NVME_VS(2, 1, 0)
@@ -115,6 +116,16 @@ struct nvmet_ns {
struct nvmet_subsys *subsys;
const char *device_path;
+#ifdef CONFIG_BLK_CGROUP
+ const char *cgroup_path;
+ /*
+ * Resolved from ->cgroup_path when the namespace is enabled and
+ * released when it is disabled, so it has the same lifetime and
+ * visibility rules as ->bdev and ->file.
+ */
+ struct cgroup_subsys_state *blkcg_css;
+#endif
+
struct config_group device_group;
struct config_group group;
@@ -732,6 +743,42 @@ void nvmet_bdev_execute_zone_mgmt_recv(struct nvmet_req *req);
void nvmet_bdev_execute_zone_mgmt_send(struct nvmet_req *req);
void nvmet_bdev_execute_zone_append(struct nvmet_req *req);
+#ifdef CONFIG_BLK_CGROUP
+static inline void nvmet_blkcg_set_bio(struct nvmet_ns *ns, struct bio *bio)
+{
+ if (ns->blkcg_css)
+ bio_associate_blkg_from_css(bio, ns->blkcg_css);
+}
+
+static inline bool nvmet_blkcg_begin(struct nvmet_ns *ns)
+{
+ if (!ns->blkcg_css || !in_task() || !(current->flags & PF_KTHREAD))
+ return false;
+
+ kthread_associate_blkcg(ns->blkcg_css);
+ return true;
+}
+
+static inline void nvmet_blkcg_end(bool associated)
+{
+ if (associated)
+ kthread_associate_blkcg(NULL);
+}
+#else
+static inline void nvmet_blkcg_set_bio(struct nvmet_ns *ns, struct bio *bio)
+{
+}
+
+static inline bool nvmet_blkcg_begin(struct nvmet_ns *ns)
+{
+ return false;
+}
+
+static inline void nvmet_blkcg_end(bool associated)
+{
+}
+#endif /* CONFIG_BLK_CGROUP */
+
static inline u32 nvmet_rw_data_len(struct nvmet_req *req)
{
return ((u32)le16_to_cpu(req->cmd->rw.length) + 1) <<
diff --git a/drivers/nvme/target/zns.c b/drivers/nvme/target/zns.c
index 23a17c02abee..1de1f0e1ef1c 100644
--- a/drivers/nvme/target/zns.c
+++ b/drivers/nvme/target/zns.c
@@ -580,6 +580,7 @@ void nvmet_bdev_execute_zone_append(struct nvmet_req *req)
bio = bio_alloc(req->ns->bdev, req->sg_cnt, opf, GFP_KERNEL);
}
+ nvmet_blkcg_set_bio(req->ns, bio);
bio->bi_end_io = nvmet_bdev_zone_append_bio_done;
bio->bi_iter.bi_sector = sect;
bio->bi_private = req;
--
2.53.0
next reply other threads:[~2026-09-22 6:51 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-22 6:51 yupeng [this message]
2026-09-22 7:00 ` Maurizio Lombardi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260922065115.22508-1-yupeng0921@gmail.com \
--to=yupeng0921@gmail.com \
--cc=axboe@kernel.dk \
--cc=cgroups@vger.kernel.org \
--cc=hannes@cmpxchg.org \
--cc=hch@lst.de \
--cc=josef@toxicpanda.com \
--cc=kch@nvidia.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=mkoutny@suse.com \
--cc=sagi@grimberg.me \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®