mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
	 "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	 Jakub Kicinski <kuba@kernel.org>,
	Paolo Abeni <pabeni@redhat.com>,  Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	 Richard Cochran <richardcochran@gmail.com>,
	 Matthias Brugger <matthias.bgg@gmail.com>,
	 AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	 Biao Huang <biao.huang@mediatek.com>,
	 Maxime Chevallier <maxime.chevallier@bootlin.com>,
	 Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	 Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: kernel@collabora.com, netdev@vger.kernel.org,
	 devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	 linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,
	 linux-stm32@st-md-mailman.stormreply.com,
	 Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Subject: [PATCH net-next v2 4/7] net: stmmac: mediatek: add PERI_ETH_CTRLx register offset in platform data
Date: Thu, 24 Sep 2026 09:23:27 +0200	[thread overview]
Message-ID: <20260924-dwmac-mediatek-mt8189-v2-4-430bd74d5ef9@collabora.com> (raw)
In-Reply-To: <20260924-dwmac-mediatek-mt8189-v2-0-430bd74d5ef9@collabora.com>

In preparation of newer SoC support, that use like MT8195 the Ethernet
control registers from the peripheral configuration syscon but at a
different base offset, add a new base offset in the variant platform
data to access the PERI_ETH_CTRLx registers and use it in implemented
methods.

Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-mediatek.c   | 26 ++++++++++++++++------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
index 1c532cc3a975..dee12cfa437d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
@@ -37,7 +37,9 @@
 #define ETH_FINE_DLY_RXC	BIT(0)
 
 /* Peri Configuration register for mt8195 */
-#define MT8195_PERI_ETH_CTRL0		0xFD0
+#define MT8195_PERI_ETH_CTRL_OFFSET	0xFD0
+
+#define MT8195_PERI_ETH_CTRL0		0x0
 #define MT8195_RMII_CLK_SRC_INTERNAL	BIT(28)
 #define MT8195_RMII_CLK_SRC_RXC		BIT(27)
 #define MT8195_ETH_INTF_SEL		GENMASK(26, 24)
@@ -47,7 +49,7 @@
 #define MT8195_DLY_GTXC_ENABLE		BIT(5)
 #define MT8195_DLY_GTXC_STAGES		GENMASK(4, 0)
 
-#define MT8195_PERI_ETH_CTRL1		0xFD4
+#define MT8195_PERI_ETH_CTRL1		0x4
 #define MT8195_DLY_RXC_INV		BIT(25)
 #define MT8195_DLY_RXC_ENABLE		BIT(18)
 #define MT8195_DLY_RXC_STAGES		GENMASK(17, 13)
@@ -55,7 +57,7 @@
 #define MT8195_DLY_TXC_ENABLE		BIT(5)
 #define MT8195_DLY_TXC_STAGES		GENMASK(4, 0)
 
-#define MT8195_PERI_ETH_CTRL2		0xFD8
+#define MT8195_PERI_ETH_CTRL2		0x8
 #define MT8195_DLY_RMII_RXC_INV		BIT(25)
 #define MT8195_DLY_RMII_RXC_ENABLE	BIT(18)
 #define MT8195_DLY_RMII_RXC_STAGES	GENMASK(17, 13)
@@ -98,6 +100,7 @@ struct mediatek_dwmac_variant {
 	const char * const *clk_list;
 	int num_clks;
 
+	u32 peri_eth_ctrl_offset;
 	u32 rx_delay_max;
 	u32 tx_delay_max;
 	u16 rx_delay_stage_div;
@@ -284,6 +287,7 @@ static int mt8195_set_interface(struct mediatek_dwmac_plat_data *plat,
 				u8 phy_intf_sel)
 {
 	u32 intf_val = FIELD_PREP(MT8195_ETH_INTF_SEL, phy_intf_sel);
+	u32 reg_offset = plat->variant->peri_eth_ctrl_offset;
 
 	if (phy_intf_sel == PHY_INTF_SEL_RMII) {
 		if (plat->rmii_clk_from_mac)
@@ -295,7 +299,9 @@ static int mt8195_set_interface(struct mediatek_dwmac_plat_data *plat,
 	/* MT8195 only support external PHY */
 	intf_val |= MT8195_EXT_PHY_MODE;
 
-	regmap_write(plat->peri_regmap, MT8195_PERI_ETH_CTRL0, intf_val);
+	regmap_write(plat->peri_regmap,
+		     reg_offset + MT8195_PERI_ETH_CTRL0,
+		     intf_val);
 
 	return 0;
 }
@@ -305,6 +311,7 @@ static int mt8195_set_delay(struct mediatek_dwmac_plat_data *plat)
 	u16 rx_delay_stage_div = plat->variant->rx_delay_stage_div;
 	u16 tx_delay_stage_div = plat->variant->tx_delay_stage_div;
 	struct mac_delay_struct *mac_delay = &plat->mac_delay;
+	u32 reg_offset = plat->variant->peri_eth_ctrl_offset;
 	u32 rx_delay_stage_val;
 	u32 tx_delay_stage_val;
 	u32 gtxc_delay_val = 0;
@@ -410,14 +417,18 @@ static int mt8195_set_delay(struct mediatek_dwmac_plat_data *plat)
 	}
 
 	regmap_update_bits(plat->peri_regmap,
-			   MT8195_PERI_ETH_CTRL0,
+			   reg_offset + MT8195_PERI_ETH_CTRL0,
 			   MT8195_RGMII_TXC_PHASE_CTRL |
 			   MT8195_DLY_GTXC_INV |
 			   MT8195_DLY_GTXC_ENABLE |
 			   MT8195_DLY_GTXC_STAGES,
 			   gtxc_delay_val);
-	regmap_write(plat->peri_regmap, MT8195_PERI_ETH_CTRL1, delay_val);
-	regmap_write(plat->peri_regmap, MT8195_PERI_ETH_CTRL2, rmii_delay_val);
+	regmap_write(plat->peri_regmap,
+		     reg_offset + MT8195_PERI_ETH_CTRL1,
+		     delay_val);
+	regmap_write(plat->peri_regmap,
+		     reg_offset + MT8195_PERI_ETH_CTRL2,
+		     rmii_delay_val);
 
 	return 0;
 }
@@ -432,6 +443,7 @@ static const struct mediatek_dwmac_variant mt8195_gmac_variant = {
 	.rx_delay_stage_div = MT8195_DLY_RXC_STAGE_DIV,
 	.tx_delay_stage_div = MT8195_DLY_TXC_STAGE_DIV,
 	.dma_bit_mask = 35,
+	.peri_eth_ctrl_offset = MT8195_PERI_ETH_CTRL_OFFSET,
 };
 
 static int mediatek_dwmac_config_dt(struct mediatek_dwmac_plat_data *plat)

-- 
2.55.0


  parent reply	other threads:[~2026-09-24  7:24 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-24  7:23 [PATCH net-next v2 0/7] net/stmmac: Add Mediatek MT8189 support Louis-Alexis Eyraud
2026-09-24  7:23 ` [PATCH net-next v2 1/7] dt-bindings: net: mediatek-dwmac: add support for MT8189 SoC Louis-Alexis Eyraud
2026-09-28  8:03   ` netdev-bot+sashiko
2026-09-29  7:36   ` Krzysztof Kozlowski
2026-10-01 13:13     ` Louis-Alexis Eyraud
2026-09-24  7:23 ` [PATCH net-next v2 2/7] net: stmmac: mediatek: simplify TX/RX delay handling in mt8195_set_delay Louis-Alexis Eyraud
2026-09-24  7:23 ` [PATCH net-next v2 3/7] net: stmmac: mediatek: add RX/TX delay stage divider in platform data Louis-Alexis Eyraud
2026-09-24  7:23 ` Louis-Alexis Eyraud [this message]
2026-09-24  7:23 ` [PATCH net-next v2 5/7] net: stmmac: mediatek: use TX clock phase shift in RGMII mode with 1Gbps speed Louis-Alexis Eyraud
2026-09-28  8:03   ` netdev-bot+sashiko
2026-09-24  7:23 ` [PATCH net-next v2 6/7] net: stmmac: mediatek: add support for TX clock output enable feature Louis-Alexis Eyraud
2026-09-24  7:23 ` [PATCH net-next v2 7/7] net: stmmac: mediatek: add support for MT8189 SoC Louis-Alexis Eyraud
2026-09-28  8:03   ` netdev-bot+sashiko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260924-dwmac-mediatek-mt8189-v2-4-430bd74d5ef9@collabora.com \
    --to=louisalexis.eyraud@collabora.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=biao.huang@mediatek.com \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=kernel@collabora.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=matthias.bgg@gmail.com \
    --cc=maxime.chevallier@bootlin.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=richardcochran@gmail.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®