mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Pooventhiran G <pooventhiran.g@oss.qualcomm.com>
To: Johannes Berg <johannes@sipsolutions.net>,
	Kees Cook <kees@kernel.org>,
	"Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-hardening@vger.kernel.org, pooventhiran.g@oss.qualcomm.com
Subject: [PATCH wireless-next v2 14/16] wifi: mac80211: Add mac80211 support to handle NL80211_CMD_SET_SMD_CTX
Date: Thu, 24 Sep 2026 08:10:51 +0530	[thread overview]
Message-ID: <20260924-smd-v2-14-bb40094da1d4@oss.qualcomm.com> (raw)
In-Reply-To: <20260924-smd-v2-0-bb40094da1d4@oss.qualcomm.com>

cfg80211 supports NL80211_CMD_SET_SMD_CTX on the target AP MLD for
userspace to program the station's dynamic context on the TX and RX
queues.

Add mac80211 support to handle this command in driver and lower layers
so that the context is installed and the target AP MLD is ready to
continue data transfer with the non-AP MLD from where it may have left
off at the current AP MLD. This facilitates the seamless roaming benefit
of the SMD BSS Transition procedure.

Signed-off-by: Pooventhiran G <pooventhiran.g@oss.qualcomm.com>
---
 include/net/mac80211.h    |  5 +++++
 net/mac80211/cfg.c        | 26 +++++++++++++++++++++++++
 net/mac80211/driver-ops.h | 24 +++++++++++++++++++++++
 net/mac80211/trace.h      | 49 +++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 104 insertions(+)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index a377a16da5c4..9b451628f248 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -4786,6 +4786,8 @@ enum ieee80211_sta_smd_state {
  * @sta_smd_state: Notifies low level driver about IEEE 802.11bn SMD substate
  *	transition of a station. It must not fail while transitioning down.
  *	The callback can sleep.
+ * @set_smd_ctx: Set the UHR SMD context for the non-AP MLD. This is used on
+ *	the target AP MLD side to program dynamic context.
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw,
@@ -5192,6 +5194,9 @@ struct ieee80211_ops {
 			     struct ieee80211_sta *sta,
 			     enum ieee80211_sta_smd_state old_state,
 			     enum ieee80211_sta_smd_state new_state);
+	int (*set_smd_ctx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			   struct ieee80211_sta *sta,
+			   struct cfg80211_smd_transition_info *st_info);
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 0ea8b610a771..2cf0e80137a7 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -6081,6 +6081,31 @@ ieee80211_set_peer_nan_sched(struct wiphy *wiphy,
 	return ieee80211_nan_set_peer_sched(sdata, sched);
 }
 
+static int ieee80211_set_smd_ctx(struct wiphy *wiphy, struct wireless_dev *wdev,
+				 const u8 *addr,
+				 struct cfg80211_smd_transition_info *st_info)
+{
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+	struct ieee80211_sub_if_data *sdata;
+	struct sta_info *sta;
+
+	lockdep_assert_wiphy(wiphy);
+
+	sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
+
+	if (sdata->vif.type != NL80211_IFTYPE_AP &&
+	    sdata->vif.type != NL80211_IFTYPE_AP_VLAN)
+		return -EOPNOTSUPP;
+
+	sta = sta_info_get_bss(sdata, addr);
+	if (!sta)
+		return -ENOENT;
+	if (!sta->sta.smd_params.smd_sta)
+		return -EINVAL;
+
+	return drv_set_smd_ctx(local, sdata, &sta->sta, st_info);
+}
+
 const struct cfg80211_ops mac80211_config_ops = {
 	.add_virtual_intf = ieee80211_add_iface,
 	.del_virtual_intf = ieee80211_del_iface,
@@ -6199,4 +6224,5 @@ const struct cfg80211_ops mac80211_config_ops = {
 	.set_epcs = ieee80211_set_epcs,
 	.nan_set_local_sched = ieee80211_set_local_nan_sched,
 	.nan_set_peer_sched = ieee80211_set_peer_nan_sched,
+	.set_smd_ctx = ieee80211_set_smd_ctx,
 };
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index ce11a723ec36..e764dd394de2 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -1820,4 +1820,28 @@ int drv_sta_smd_state(struct ieee80211_local *local,
 		      enum ieee80211_sta_smd_state old_state,
 		      enum ieee80211_sta_smd_state new_state);
 
+static inline int drv_set_smd_ctx(struct ieee80211_local *local,
+				  struct ieee80211_sub_if_data *sdata,
+				  struct ieee80211_sta *sta,
+				  struct cfg80211_smd_transition_info *st_info)
+{
+	int ret;
+
+	if (!local->ops->set_smd_ctx)
+		return -EOPNOTSUPP;
+
+	sdata = get_bss_sdata(sdata);
+
+	lockdep_assert_wiphy(local->hw.wiphy);
+
+	if (!check_sdata_in_driver(sdata))
+		return -EIO;
+
+	trace_drv_set_smd_ctx(local, sdata, sta, st_info);
+	ret = local->ops->set_smd_ctx(&local->hw, &sdata->vif, sta, st_info);
+	trace_drv_return_int(local, ret);
+
+	return ret;
+}
+
 #endif /* __MAC80211_DRIVER_OPS */
diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h
index 63838a6d5d07..7aba79e441cf 100644
--- a/net/mac80211/trace.h
+++ b/net/mac80211/trace.h
@@ -3438,6 +3438,55 @@ TRACE_EVENT(drv_sta_smd_state,
 	)
 );
 
+TRACE_EVENT(drv_set_smd_ctx,
+	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_sub_if_data *sdata,
+		 struct ieee80211_sta *sta,
+		 struct cfg80211_smd_transition_info *st_info),
+
+	TP_ARGS(local, sdata, sta, st_info),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		VIF_ENTRY
+		STA_ENTRY
+		__field(u8, st_type)
+		__field(unsigned int, num_tids)
+		__dynamic_array(unsigned long, dl_tid_bitmap,
+				BITS_TO_LONGS(IEEE80211_SMD_CTX_NUM_TIDS))
+		__dynamic_array(unsigned long, ul_tid_bitmap,
+				BITS_TO_LONGS(IEEE80211_SMD_CTX_NUM_TIDS))
+	),
+
+	TP_fast_assign(
+		struct ieee80211_smd_ctx *ctx = st_info->ctx;
+		unsigned long sz;
+
+		LOCAL_ASSIGN;
+		VIF_ASSIGN;
+		STA_ASSIGN;
+		__entry->st_type = st_info->type;
+
+		__entry->num_tids = IEEE80211_SMD_CTX_NUM_TIDS;
+		sz = BITS_TO_LONGS(__entry->num_tids) * sizeof(unsigned long);
+
+		memcpy(__get_dynamic_array(dl_tid_bitmap),
+		       ctx->dl.valid_tid_bmap, sz);
+		memcpy(__get_dynamic_array(ul_tid_bitmap),
+		       ctx->ul.valid_tid_bmap, sz);
+	),
+
+	TP_printk(LOCAL_PR_FMT VIF_PR_FMT STA_PR_FMT
+		  ", ST type=%u DL TIDs: %*pb, UL TIDs: %*pb",
+		  LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG,
+		  __entry->st_type,
+		  __entry->num_tids,
+		  (unsigned long *)__get_dynamic_array(dl_tid_bitmap),
+		  __entry->num_tids,
+		  (unsigned long *)__get_dynamic_array(ul_tid_bitmap)
+	)
+);
+
 #endif /* !__MAC80211_DRIVER_TRACE || TRACE_HEADER_MULTI_READ */
 
 #undef TRACE_INCLUDE_PATH

-- 
2.34.1


  parent reply	other threads:[~2026-09-24  2:42 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-24  2:40 [PATCH wireless-next v2 00/16] wifi: Add Seamless Mobility Domain (SMD) AP support Pooventhiran G
2026-09-24  2:40 ` [PATCH wireless-next v2 01/16] wifi: nl80211: Define Seamless Mobility Domain (SMD) device capability Pooventhiran G
2026-09-24  2:40 ` [PATCH wireless-next v2 02/16] wifi: nl80211: Add kernel interfaces for Seamless Mobility Domain setup Pooventhiran G
2026-09-24  2:40 ` [PATCH wireless-next v2 03/16] wifi: cfg80211/mac80211: Configure AP with SMD capabilities Pooventhiran G
2026-09-24  2:40 ` [PATCH wireless-next v2 04/16] wifi: cfg80211/mac80211: Parse SMD parameters in STA addition/modification Pooventhiran G
2026-09-24  2:40 ` [PATCH wireless-next v2 05/16] wifi: nl80211/cfg80211: Indicate STA creation via SMD BSS Transition Pooventhiran G
2026-09-24  2:40 ` [PATCH wireless-next v2 06/16] wifi: nl80211/mac80211: Add SMD BSS Transition sub-state STA flags Pooventhiran G
2026-09-24  2:40 ` [PATCH wireless-next v2 07/16] wifi: mac80211: Add driver_op for SMD substate changes Pooventhiran G
2026-09-24  2:40 ` [PATCH wireless-next v2 08/16] wifi: mac80211: Send BlockAck policy in AMPDU action Pooventhiran G
2026-09-24  2:40 ` [PATCH wireless-next v2 09/16] wifi: mac80211: Define layouts for SMD BSS Transition context Pooventhiran G
2026-09-24  2:40 ` [PATCH wireless-next v2 10/16] wifi: nl80211: Define attributes to pack " Pooventhiran G
2026-09-24  2:40 ` [PATCH wireless-next v2 11/16] wifi: cfg80211/mac80211: Handle UHR Link Reconfiguration frame Pooventhiran G
2026-09-24  2:40 ` [PATCH wireless-next v2 12/16] wifi: nl80211: Pack SMD dynamic context along with frame Pooventhiran G
2026-09-24  2:40 ` [PATCH wireless-next v2 13/16] wifi: nl80211/cfg80211: Add support for SMD context programming Pooventhiran G
2026-09-24  2:40 ` Pooventhiran G [this message]
2026-09-24  2:40 ` [PATCH wireless-next v2 15/16] wifi: nl80211/cfg80211: Add support for querying SMD context for target AP MLD Pooventhiran G
2026-09-24  2:40 ` [PATCH wireless-next v2 16/16] wifi: mac80211: Add mac80211 support to handle NL80211_CMD_GET_SMD_CTX Pooventhiran G

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260924-smd-v2-14-bb40094da1d4@oss.qualcomm.com \
    --to=pooventhiran.g@oss.qualcomm.com \
    --cc=gustavoars@kernel.org \
    --cc=johannes@sipsolutions.net \
    --cc=kees@kernel.org \
    --cc=linux-hardening@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®