mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Aleksei Sviridkin <f@lex.la>
To: Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	linux-kernel@vger.kernel.org,
	Florian Fainelli <f.fainelli@gmail.com>,
	Mao Wenan <maowenan@huawei.com>,
	Woojung Huh <woojung.huh@microchip.com>,
	Vladimir Oltean <vladimir.oltean@nxp.com>,
	Maxime Chevallier <maxime.chevallier@bootlin.com>
Subject: [PATCH net v3 2/4] net: phy: put the driver module the attach took
Date: Fri, 25 Sep 2026 00:59:48 +0300	[thread overview]
Message-ID: <20260924215951.2127682-3-f@lex.la> (raw)
In-Reply-To: <20260924215951.2127682-1-f@lex.la>

phy_attach_direct() pins the PHY driver module through d->driver, and
phy_detach() releases it by reading d->driver again. Unbinding the PHY
driver while the PHY is attached clears that pointer, so a detach that
runs while the driver is still unbound skips the put and the module can
no longer be unloaded; if a different driver binds in between, the put
lands on a module that was never pinned. The NULL test added by
commit c2b727df7caa ("net: phy: Avoid NPD upon phy_detach() when driver
is unbound") avoids the oops but skips the put.

Found by reading phy_detach() while chasing a PHY driver unbind race on
a Keenetic KN-1012 (MT7981, air_en8811h built as a module). The leak
itself was not observed there: unbinding air_en8811h under the attached
lan4 DSA port and then unbinding the switch faults earlier on that
board, in phy_free_interrupt() or under phy_stop(), before
phy_detach() gets to the put.

Remember which module was pinned and release that one.

Fixes: cafe8df8b9bc ("net: phy: Fix lack of reference count on PHY driver")
Assisted-by: LLM
Signed-off-by: Aleksei Sviridkin <f@lex.la>
---
 drivers/net/phy/phy_device.c | 8 +++++---
 include/linux/phy.h          | 2 ++
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 7046976c5b6a..29d65f6cfd59 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1793,6 +1793,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 		err = -EIO;
 		goto error_put_device;
 	}
+	phydev->drv_owner = d->driver->owner;
 
 	if (phydev->is_genphy_driven) {
 		err = d->driver->probe(d);
@@ -1894,7 +1895,8 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 	return err;
 
 error_module_put:
-	module_put(d->driver->owner);
+	module_put(phydev->drv_owner);
+	phydev->drv_owner = NULL;
 	phydev->is_genphy_driven = 0;
 	d->driver = NULL;
 error_put_device:
@@ -1955,8 +1957,8 @@ void phy_detach(struct phy_device *phydev)
 	phydev->phy_link_change = NULL;
 	phydev->phylink = NULL;
 
-	if (phydev->mdio.dev.driver)
-		module_put(phydev->mdio.dev.driver->owner);
+	module_put(phydev->drv_owner);
+	phydev->drv_owner = NULL;
 
 	/* If the device had no specific driver before (i.e. - it
 	 * was using the generic driver), we unbind the device
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 5f8d65868e0f..33a207ac5c30 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -560,6 +560,7 @@ struct phy_oatc14_sqi_capability {
  *
  * @mdio: MDIO bus this PHY is on
  * @drv: Pointer to the driver for this PHY instance
+ * @drv_owner: Driver module phy_attach_direct() took a reference on
  * @devlink: Create a link between phy dev and mac dev, if the external phy
  *           used by current mac interface is managed by another mac interface.
  * @phyindex: Unique id across the phy's parent tree of phys to address the PHY
@@ -671,6 +672,7 @@ struct phy_device {
 	/* Information about the PHY type */
 	/* And management functions */
 	const struct phy_driver *drv;
+	struct module *drv_owner;
 
 	struct device_link *devlink;
 
-- 
2.53.0


  parent reply	other threads:[~2026-09-24 22:00 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-24 21:59 [PATCH net v3 0/4] net: phy: make PHY driver unbind safe against attach and use Aleksei Sviridkin
2026-09-24 21:59 ` [PATCH net v3 1/4] net: phy: refuse a second attach before touching the PHY Aleksei Sviridkin
2026-09-24 21:59 ` Aleksei Sviridkin [this message]
2026-09-24 21:59 ` [PATCH net v3 3/4] net: phy: serialise attach and detach with PHY driver bind and unbind Aleksei Sviridkin
2026-09-30  0:46   ` Jakub Kicinski
2026-09-24 21:59 ` [PATCH net v3 4/4] net: phy: make an unbind wait for the attached consumer to detach Aleksei Sviridkin
2026-09-30  0:44 ` [PATCH net v3 0/4] net: phy: make PHY driver unbind safe against attach and use Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260924215951.2127682-3-f@lex.la \
    --to=f@lex.la \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=maowenan@huawei.com \
    --cc=maxime.chevallier@bootlin.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=vladimir.oltean@nxp.com \
    --cc=woojung.huh@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®