[PATCH v11 08/15] drm/panfrost: Move all DRM device initialisation into device_init()

["Adrián Larumbe" <adrian.larumbe@collabora.com>]

Ideally the probe() function will do as little as possible, and all device
initialisation and registration should happen inside the panfrost device
subsystem, just like it's done in Panthor. This also simplifies resource
unwinding in the error path.

Do the same thing for DRM driver remove, as in, sweep most of the action
into panfrost_device_fini(), just like we did for device probe.

Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
---
 drivers/gpu/drm/panfrost/panfrost_device.c | 46 ++++++++++++++++++++++++++
 drivers/gpu/drm/panfrost/panfrost_drv.c    | 52 +-----------------------------
 2 files changed, 47 insertions(+), 51 deletions(-)

diff --git a/drivers/gpu/drm/panfrost/panfrost_device.c b/drivers/gpu/drm/panfrost/panfrost_device.c
index 9f2b1967a398..b8094c0d1252 100644
--- a/drivers/gpu/drm/panfrost/panfrost_device.c
+++ b/drivers/gpu/drm/panfrost/panfrost_device.c
@@ -8,6 +8,7 @@
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
+#include <drm/drm_drv.h>
 
 #include "panfrost_device.h"
 #include "panfrost_devfreq.h"
@@ -230,6 +231,12 @@ int panfrost_device_init(struct panfrost_device *pfdev)
 {
 	int err;
 
+	pfdev->comp = of_device_get_match_data(pfdev->base.dev);
+	if (!pfdev->comp)
+		return -ENODEV;
+
+	pfdev->coherent = device_get_dma_attr(pfdev->base.dev) == DEV_DMA_COHERENT;
+
 #ifdef CONFIG_DEBUG_FS
 	mutex_init(&pfdev->debugfs.gems_lock);
 	INIT_LIST_HEAD(&pfdev->debugfs.gems_list);
@@ -291,8 +298,33 @@ int panfrost_device_init(struct panfrost_device *pfdev)
 	if (err)
 		goto out_perfcnt;
 
+	/* The reason we must manually set the PM status and usage counter is
+	 * we have just powered the device up but did not go through the PM
+	 * runtime resume callback, so we need to update these ourselves.
+	 */
+	pm_runtime_get_noresume(pfdev->base.dev);
+	pm_runtime_set_active(pfdev->base.dev);
+	pm_runtime_mark_last_busy(pfdev->base.dev);
+	pm_runtime_enable(pfdev->base.dev);
+	pm_runtime_set_autosuspend_delay(pfdev->base.dev, 50); /* ~3 frames */
+	pm_runtime_use_autosuspend(pfdev->base.dev);
+
+	/*
+	 * Register the DRM device with the core and the connectors with
+	 * sysfs
+	 */
+	err = drm_dev_register(&pfdev->base, 0);
+	if (err < 0)
+		goto err_disable_rpm;
+
+	pm_runtime_put_autosuspend(pfdev->base.dev);
+
 	return 0;
 
+err_disable_rpm:
+	pm_runtime_dont_use_autosuspend(pfdev->base.dev);
+	pm_runtime_disable(pfdev->base.dev);
+	panfrost_gem_fini(pfdev);
 out_perfcnt:
 	panfrost_perfcnt_fini(pfdev);
 out_job:
@@ -311,11 +343,22 @@ int panfrost_device_init(struct panfrost_device *pfdev)
 	panfrost_reset_fini(pfdev);
 out_pm_domain:
 	panfrost_pm_domain_fini(pfdev);
+
+	if (pm_runtime_active(pfdev->base.dev)) {
+		pm_runtime_set_suspended(pfdev->base.dev);
+		pm_runtime_put_noidle(pfdev->base.dev);
+	}
+
 	return err;
 }
 
 void panfrost_device_fini(struct panfrost_device *pfdev)
 {
+	pm_runtime_get_sync(pfdev->base.dev);
+
+	pm_runtime_dont_use_autosuspend(pfdev->base.dev);
+	pm_runtime_disable(pfdev->base.dev);
+
 	panfrost_gem_fini(pfdev);
 	panfrost_perfcnt_fini(pfdev);
 	panfrost_jm_fini(pfdev);
@@ -326,6 +369,9 @@ void panfrost_device_fini(struct panfrost_device *pfdev)
 	panfrost_clk_fini(pfdev);
 	panfrost_reset_fini(pfdev);
 	panfrost_pm_domain_fini(pfdev);
+
+	pm_runtime_set_suspended(pfdev->base.dev);
+	pm_runtime_put_noidle(pfdev->base.dev);
 }
 
 #define PANFROST_EXCEPTION(id) \
diff --git a/drivers/gpu/drm/panfrost/panfrost_drv.c b/drivers/gpu/drm/panfrost/panfrost_drv.c
index 907d4a14a0b5..f77780c72a1a 100644
--- a/drivers/gpu/drm/panfrost/panfrost_drv.c
+++ b/drivers/gpu/drm/panfrost/panfrost_drv.c
@@ -830,7 +830,6 @@ static const struct drm_driver panfrost_drm_driver = {
 static int panfrost_probe(struct platform_device *pdev)
 {
 	struct panfrost_device *pfdev;
-	int err;
 
 	pfdev = devm_drm_dev_alloc(&pdev->dev, &panfrost_drm_driver,
 				   struct panfrost_device, base);
@@ -839,50 +838,7 @@ static int panfrost_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, pfdev);
 
-	pfdev->comp = of_device_get_match_data(&pdev->dev);
-	if (!pfdev->comp)
-		return -ENODEV;
-
-	pfdev->coherent = device_get_dma_attr(&pdev->dev) == DEV_DMA_COHERENT;
-
-	err = panfrost_device_init(pfdev);
-	if (err) {
-		if (err != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Fatal error during GPU init\n");
-		goto err_out0;
-	}
-
-	/* The reason we must manually set the PM status and usage counter is
-	 * we have just powered the device up but did not go through the PM
-	 * runtime resume callback, so we need to update these ourselves.
-	 */
-	pm_runtime_get_noresume(pfdev->base.dev);
-	pm_runtime_set_active(pfdev->base.dev);
-	pm_runtime_mark_last_busy(pfdev->base.dev);
-	pm_runtime_enable(pfdev->base.dev);
-	pm_runtime_set_autosuspend_delay(pfdev->base.dev, 50); /* ~3 frames */
-	pm_runtime_use_autosuspend(pfdev->base.dev);
-
-	/*
-	 * Register the DRM device with the core and the connectors with
-	 * sysfs
-	 */
-	err = drm_dev_register(&pfdev->base, 0);
-	if (err < 0)
-		goto err_out1;
-
-	pm_runtime_put_autosuspend(pfdev->base.dev);
-
-	return 0;
-
-err_out1:
-	pm_runtime_dont_use_autosuspend(pfdev->base.dev);
-	pm_runtime_disable(pfdev->base.dev);
-	panfrost_device_fini(pfdev);
-	pm_runtime_set_suspended(pfdev->base.dev);
-	pm_runtime_put_noidle(pfdev->base.dev);
-err_out0:
-	return err;
+	return panfrost_device_init(pfdev);
 }
 
 static void panfrost_remove(struct platform_device *pdev)
@@ -891,13 +847,7 @@ static void panfrost_remove(struct platform_device *pdev)
 
 	drm_dev_unregister(&pfdev->base);
 
-	pm_runtime_get_sync(pfdev->base.dev);
-	pm_runtime_dont_use_autosuspend(pfdev->base.dev);
-	pm_runtime_disable(pfdev->base.dev);
 	panfrost_device_fini(pfdev);
-	pm_runtime_set_suspended(pfdev->base.dev);
-	pm_runtime_put_noidle(pfdev->base.dev);
-
 }
 
 static ssize_t profiling_show(struct device *dev,

-- 
2.55.0