mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: James Hilliard <james.hilliard1@gmail.com>
To: "Russell King" <linux@armlinux.org.uk>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Heiner Kallweit" <hkallweit1@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	"Eric Dumazet" <edumazet@google.com>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>,
	"Maxime Chevallier" <maxime.chevallier@bootlin.com>,
	"Andrew Lunn" <andrew+netdev@lunn.ch>,
	"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
	"Alexandre Torgue" <alexandre.torgue@foss.st.com>,
	"Christian Marangi" <ansuelsmth@gmail.com>,
	"Tiezhu Yang" <yangtiezhu@loongson.cn>,
	"Huacai Chen" <chenhuacai@kernel.org>,
	"Alexei Starovoitov" <ast@kernel.org>,
	"Daniel Borkmann" <daniel@iogearbox.net>,
	"Jesper Dangaard Brouer" <hawk@kernel.org>,
	"John Fastabend" <john.fastabend@gmail.com>,
	"Stanislav Fomichev" <sdf@fomichev.me>,
	"Serge Semin" <fancer.lancer@gmail.com>,
	"Suraj Jaiswal" <quic_jsuraj@quicinc.com>,
	"Richard Cochran" <richardcochran@gmail.com>,
	"Joao Pinto" <Joao.Pinto@synopsys.com>,
	"Vladimir Oltean" <vladimir.oltean@nxp.com>,
	"Ong Boon Leong" <boon.leong.ong@intel.com>,
	"Voon Weifeng" <weifeng.voon@intel.com>,
	"Song, Yoong Siang" <yoong.siang.song@intel.com>,
	"Linus Walleij" <linusw@kernel.org>,
	"Martin Blumenstingl" <martin.blumenstingl@googlemail.com>,
	"Magnus Karlsson" <magnus.karlsson@intel.com>,
	"Maciej Fijalkowski" <maciej.fijalkowski@intel.com>,
	"Simon Horman" <horms@kernel.org>,
	"Björn Töpel" <bjorn@kernel.org>,
	"Thierry Reding" <thierry.reding@kernel.org>,
	"Jonathan Hunter" <jonathanh@nvidia.com>,
	"Chen-Yu Tsai" <wens@kernel.org>,
	"Jernej Skrabec" <jernej.skrabec@gmail.com>,
	"Samuel Holland" <samuel@sholland.org>,
	"Jose Abreu" <Jose.Abreu@synopsys.com>, "Yao Zi" <me@ziyao.cc>,
	"Philipp Zabel" <p.zabel@pengutronix.de>
Cc: Richard Genoud <richard.genoud@bootlin.com>,
	 Alastair D'Silva <alastair@d-silva.org>,
	Maxime Ripard <mripard@kernel.org>,
	 netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	 linux-stm32@st-md-mailman.stormreply.com,
	 linux-arm-kernel@lists.infradead.org, bpf@vger.kernel.org,
	 ZhaoJinming <zhaojinming@uniontech.com>,
	 Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>,
	 Ding Hui <dinghui1111@163.com>,
	Linkui Xiao <xiaolinkui@kylinos.cn>,
	 Linkui Xiao <xiaolinkui@126.com>,
	linux-tegra@vger.kernel.org,  linux-sunxi@lists.linux.dev,
	James Hilliard <james.hilliard1@gmail.com>
Subject: [PATCH net-next v5 06/19] net: stmmac: pass the desired EST enable state to est_configure()
Date: Sun, 27 Sep 2026 15:59:41 -0600	[thread overview]
Message-ID: <20260927-submit-stmmac-reset-fixes-v1-v5-6-feec6c14dd06@gmail.com> (raw)
In-Reply-To: <20260927-submit-stmmac-reset-fixes-v1-v5-0-feec6c14dd06@gmail.com>

From: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>

Pass the desired EST enable state explicitly to est_configure() instead
of having it derive the EEST/EST_INT_EN bits from cfg->enable. This
decouples the hardware programming state from the priv->est.enable
flag, which records whether the taprio offload is attached.

No functional change intended: the callers keep toggling
priv->est.enable around the EST programming, as before.

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/hwif.h       | 2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_est.c | 6 +++---
 drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 4 ++--
 drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c  | 4 ++--
 4 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index a8a5c8fdd5ed..1fd9f1ab316e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -617,7 +617,7 @@ struct stmmac_mmc_ops {
 
 struct stmmac_est_ops {
 	int (*configure)(struct stmmac_priv *priv, struct stmmac_est *cfg,
-			 unsigned int ptp_rate);
+			 unsigned int ptp_rate, bool enable);
 	void (*irq_status)(struct stmmac_priv *priv, struct net_device *dev,
 			   struct stmmac_extra_stats *x, u32 txqcnt);
 };
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_est.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_est.c
index afc516059b89..f15d4d046aa7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_est.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_est.c
@@ -26,7 +26,7 @@ static int est_write(void __iomem *est_addr, u32 reg, u32 val, bool gcl)
 }
 
 static int est_configure(struct stmmac_priv *priv, struct stmmac_est *cfg,
-			 unsigned int ptp_rate)
+			 unsigned int ptp_rate, bool enable)
 {
 	void __iomem *est_addr = priv->estaddr;
 	int i, ret = 0;
@@ -62,7 +62,7 @@ static int est_configure(struct stmmac_priv *priv, struct stmmac_est *cfg,
 		ctrl |= ((NSEC_PER_SEC / ptp_rate) * EST_GMAC5_PTOV_MUL) <<
 			 EST_GMAC5_PTOV_SHIFT;
 	}
-	if (cfg->enable)
+	if (enable)
 		ctrl |= EST_EEST | EST_SSWL | EST_DFBS;
 	else
 		ctrl &= ~EST_EEST;
@@ -70,7 +70,7 @@ static int est_configure(struct stmmac_priv *priv, struct stmmac_est *cfg,
 	writel(ctrl, est_addr + EST_CONTROL);
 
 	/* Configure EST interrupt */
-	if (cfg->enable)
+	if (enable)
 		ctrl = EST_IECGCE | EST_IEHS | EST_IEHF | EST_IEBE | EST_IECC;
 	else
 		ctrl = 0;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
index 2a4099fe470c..64d890664421 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
@@ -74,7 +74,7 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
 		mutex_lock(&priv->est_lock);
 		priv->est.enable = false;
 		stmmac_est_configure(priv, priv, &priv->est,
-				     priv->plat->clk_ptp_rate);
+				     priv->plat->clk_ptp_rate, false);
 		mutex_unlock(&priv->est_lock);
 	}
 
@@ -104,7 +104,7 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
 		priv->est.btr[1] = (u32)time.tv_sec;
 		priv->est.enable = true;
 		ret = stmmac_est_configure(priv, priv, &priv->est,
-					   priv->plat->clk_ptp_rate);
+					   priv->plat->clk_ptp_rate, true);
 		mutex_unlock(&priv->est_lock);
 		if (ret)
 			netdev_err(priv->dev, "failed to configure EST\n");
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index 357d1eaf0d7d..67c6fc32d0ea 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -1082,7 +1082,7 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
 	tc_taprio_map_maxsdu_txq(priv, qopt);
 
 	ret = stmmac_est_configure(priv, priv, &priv->est,
-				   priv->plat->clk_ptp_rate);
+				   priv->plat->clk_ptp_rate, true);
 	mutex_unlock(&priv->est_lock);
 	if (ret) {
 		netdev_err(priv->dev, "failed to configure EST\n");
@@ -1100,7 +1100,7 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
 	mutex_lock(&priv->est_lock);
 	priv->est.enable = false;
 	stmmac_est_configure(priv, priv, &priv->est,
-			     priv->plat->clk_ptp_rate);
+			     priv->plat->clk_ptp_rate, false);
 	/* Reset taprio status */
 	for (i = 0; i < priv->plat->tx_queues_to_use; i++) {
 		priv->xstats.max_sdu_txq_drop[i] = 0;

-- 
2.53.0


  parent reply	other threads:[~2026-09-27 22:00 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-27 21:59 [PATCH net-next v5 00/19] net: stmmac: preserve datapath state across MTU and resume failures James Hilliard
2026-09-27 21:59 ` [PATCH net-next v5 01/19] net: stmmac: unwind the WoL IRQ after a safety IRQ request failure James Hilliard
2026-09-27 21:59 ` [PATCH net-next v5 02/19] net: stmmac: request the MDIO reset GPIO only once James Hilliard
2026-09-27 23:35   ` Linus Walleij
2026-09-27 23:49     ` James Hilliard
2026-09-27 21:59 ` [PATCH net-next v5 03/19] net: phylink: allow stopping a suspended instance James Hilliard
2026-09-27 21:59 ` [PATCH net-next v5 04/19] xsk: freeze deferred pool teardown during system sleep James Hilliard
2026-09-28 12:16   ` Björn Töpel
2026-09-27 21:59 ` [PATCH net-next v5 05/19] net: stmmac: embed struct stmmac_est in stmmac_priv struct James Hilliard
2026-09-27 21:59 ` James Hilliard [this message]
2026-09-27 21:59 ` [PATCH net-next v5 07/19] net: stmmac: re-apply taprio offload in __stmmac_open() and stmmac_resume() James Hilliard
2026-09-27 21:59 ` [PATCH net-next v5 08/19] net: stmmac: serialize and retain PHC configuration across reset James Hilliard
2026-09-27 21:59 ` [PATCH net-next v5 09/19] net: stmmac: leave the datapath running for normal-size MTU changes James Hilliard
2026-09-27 21:59 ` [PATCH net-next v5 10/19] net: stmmac: fix error path cleanup in DMA descriptor ring allocation James Hilliard
2026-09-27 21:59 ` [PATCH net-next v5 11/19] net: stmmac: complete DMA configuration allocation unwind James Hilliard
2026-09-27 21:59 ` [PATCH net-next v5 12/19] net: stmmac: keep DMA configurations at stable addresses James Hilliard
2026-09-27 21:59 ` [PATCH net-next v5 13/19] net: stmmac: track datapath and power ownership across failed reopening James Hilliard
2026-09-27 21:59 ` [PATCH net-next v5 14/19] net: stmmac: use the tracked datapath restart for XSK pool changes James Hilliard
2026-09-27 21:59 ` [PATCH net-next v5 15/19] net: stmmac: restore TC offloads before restarting DMA James Hilliard
2026-09-27 21:59 ` [PATCH net-next v5 16/19] xsk: allow drivers to retain DMA mappings independently of pools James Hilliard
2026-09-28 12:22   ` Björn Töpel
2026-09-27 21:59 ` [PATCH net-next v5 17/19] net: stmmac: retain DMA memory until hardware shutdown completes James Hilliard
2026-09-27 21:59 ` [PATCH net-next v5 18/19] net: stmmac: prepare device-local DMA interrupt quiescence James Hilliard
2026-09-27 21:59 ` [PATCH net-next v5 19/19] net: stmmac: retain DMA resources across MTU changes James Hilliard
2026-09-27 22:10 ` [PATCH net-next v5 00/19] net: stmmac: preserve datapath state across MTU and resume failures Jakub Kicinski
2026-09-27 23:15   ` James Hilliard
2026-09-28  6:50 ` Maxime Chevallier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260927-submit-stmmac-reset-fixes-v1-v5-6-feec6c14dd06@gmail.com \
    --to=james.hilliard1@gmail.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=Jose.Abreu@synopsys.com \
    --cc=alastair@d-silva.org \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=ansuelsmth@gmail.com \
    --cc=ast@kernel.org \
    --cc=bjorn@kernel.org \
    --cc=boon.leong.ong@intel.com \
    --cc=bpf@vger.kernel.org \
    --cc=chenhuacai@kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=dinghui1111@163.com \
    --cc=edumazet@google.com \
    --cc=fancer.lancer@gmail.com \
    --cc=hawk@kernel.org \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=john.fastabend@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=kuba@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=lorenzo.bianconi@oss.qualcomm.com \
    --cc=maciej.fijalkowski@intel.com \
    --cc=magnus.karlsson@intel.com \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=maxime.chevallier@bootlin.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=me@ziyao.cc \
    --cc=mripard@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=pabeni@redhat.com \
    --cc=quic_jsuraj@quicinc.com \
    --cc=richard.genoud@bootlin.com \
    --cc=richardcochran@gmail.com \
    --cc=rmk+kernel@armlinux.org.uk \
    --cc=samuel@sholland.org \
    --cc=sdf@fomichev.me \
    --cc=thierry.reding@kernel.org \
    --cc=vladimir.oltean@nxp.com \
    --cc=weifeng.voon@intel.com \
    --cc=wens@kernel.org \
    --cc=xiaolinkui@126.com \
    --cc=xiaolinkui@kylinos.cn \
    --cc=yangtiezhu@loongson.cn \
    --cc=yoong.siang.song@intel.com \
    --cc=zhaojinming@uniontech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®