[PATCH v2 01/11] dt-bindings: clock: sun4i-a10-ccu: add Allwinner B288

[Pablo Mazzini <pmazzini@gmail.com>]

The B288 (sun8iw10p1) is a dual Cortex-A7 SoC used in e-book readers.
Its CCU needs only the two oscillator inputs, so it fits the existing
schema without changes.

Signed-off-by: Pablo Mazzini <pmazzini@gmail.com>
---
 .../clock/allwinner,sun4i-a10-ccu.yaml        |  1 +
 include/dt-bindings/clock/sun8i-b288-ccu.h    | 88 +++++++++++++++++++
 include/dt-bindings/reset/sun8i-b288-ccu.h    | 45 ++++++++++
 3 files changed, 134 insertions(+)
 create mode 100644 include/dt-bindings/clock/sun8i-b288-ccu.h
 create mode 100644 include/dt-bindings/reset/sun8i-b288-ccu.h

diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
index 1690b9d99c3d..cc3f62d3554c 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
@@ -28,6 +28,7 @@ properties:
       - allwinner,sun8i-a33-ccu
       - allwinner,sun8i-a83t-ccu
       - allwinner,sun8i-a83t-r-ccu
+      - allwinner,sun8i-b288-ccu
       - allwinner,sun8i-h3-ccu
       - allwinner,sun8i-h3-r-ccu
       - allwinner,sun8i-r40-ccu
diff --git a/include/dt-bindings/clock/sun8i-b288-ccu.h b/include/dt-bindings/clock/sun8i-b288-ccu.h
new file mode 100644
index 000000000000..8983c6d2f362
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-b288-ccu.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+#ifndef _DT_BINDINGS_CLK_SUN8I_B288_H_
+#define _DT_BINDINGS_CLK_SUN8I_B288_H_
+
+#define CLK_PLL_CPUX	0
+#define CLK_PLL_AUDIO_BASE	1
+#define CLK_PLL_VIDEO0	2
+#define CLK_PLL_DDR0	3
+#define CLK_PLL_PERIPH0	4
+#define CLK_PLL_VIDEO1	5
+#define CLK_PLL_24M	6
+#define CLK_PLL_PERIPH1	7
+#define CLK_PLL_DE	8
+#define CLK_PLL_DDR1	9
+
+#define CLK_PLL_PERIPH0_2X	10
+#define CLK_PLL_PERIPH1_2X	11
+#define CLK_CPUX	12
+#define CLK_AXI	13
+#define CLK_CPUAPB	14
+#define CLK_AHB1	15
+#define CLK_APB1	16
+#define CLK_APB2	17
+
+#define CLK_NAND	18
+#define CLK_MMC0	19
+#define CLK_MMC1	20
+#define CLK_MMC2	21
+#define CLK_MMC3	22
+#define CLK_SPI0	23
+#define CLK_SPI1	24
+#define CLK_SPI2	25
+#define CLK_DRAM	26
+#define CLK_DE	27
+#define CLK_EE	28
+#define CLK_EDMA	29
+#define CLK_TCON0	30
+#define CLK_MBUS	31
+
+#define CLK_BUS_THS	32
+#define CLK_BUS_NAND	33
+#define CLK_BUS_SDMMC0_BUS	34
+#define CLK_BUS_SDMMC1_BUS	35
+#define CLK_BUS_SDMMC2_BUS	36
+#define CLK_BUS_SDMMC3_BUS	37
+#define CLK_BUS_SPI0	38
+#define CLK_BUS_SPI1	39
+#define CLK_BUS_SPI2	40
+#define CLK_BUS_I2S0	41
+#define CLK_BUS_I2S1	42
+#define CLK_BUS_SPDIF	43
+#define CLK_BUS_DSD	44
+#define CLK_BUS_DMIC	45
+#define CLK_BUS_USBOHCI0	46
+#define CLK_BUS_USBEHCI0	47
+#define CLK_BUS_USBOTG	48
+#define CLK_BUS_DE	49
+#define CLK_BUS_EE	50
+#define CLK_BUS_TCON0	51
+#define CLK_BUS_CSI	52
+#define CLK_BUS_ADDA	53
+#define CLK_BUS_SDRAM	54
+#define CLK_BUS_PSRAM	55
+#define CLK_BUS_DMA	56
+#define CLK_BUS_UART0	57
+#define CLK_BUS_UART1	58
+#define CLK_BUS_UART2	59
+#define CLK_BUS_UART3	60
+#define CLK_BUS_UART4	61
+#define CLK_BUS_UART5	62
+#define CLK_BUS_TWI0	63
+#define CLK_BUS_TWI1	64
+#define CLK_BUS_TWI2	65
+#define CLK_BUS_PIO	66
+#define CLK_BUS_GPADC	67
+#define CLK_BUS_KEYADC	68
+
+/*
+ * mmc0 and mmc1 are v4p1x controllers driven in the old timing mode, which
+ * needs the sample and output phase clocks. mmc2 and mmc3 are newer blocks
+ * that do their own delay calibration and have none.
+ */
+#define CLK_MMC0_SAMPLE	69
+#define CLK_MMC0_OUTPUT	70
+#define CLK_MMC1_SAMPLE	71
+#define CLK_MMC1_OUTPUT	72
+
+#endif
diff --git a/include/dt-bindings/reset/sun8i-b288-ccu.h b/include/dt-bindings/reset/sun8i-b288-ccu.h
new file mode 100644
index 000000000000..675145654548
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-b288-ccu.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+#ifndef _DT_BINDINGS_RST_SUN8I_B288_H_
+#define _DT_BINDINGS_RST_SUN8I_B288_H_
+
+#define RST_BUS_THS	0
+#define RST_BUS_NAND	1
+#define RST_BUS_MMC0	2
+#define RST_BUS_MMC1	3
+#define RST_BUS_MMC2	4
+#define RST_BUS_MMC3	5
+#define RST_BUS_SPI0	6
+#define RST_BUS_SPI1	7
+#define RST_BUS_SPI2	8
+#define RST_BUS_I2S0	9
+#define RST_BUS_I2S1	10
+#define RST_BUS_SPDIF	11
+#define RST_BUS_DSD	12
+#define RST_BUS_DMIC	13
+#define RST_USBPHY0	14
+#define RST_BUS_OHCI0	15
+#define RST_BUS_EHCI0	16
+#define RST_BUS_OTG	17
+#define RST_BUS_DE	18
+#define RST_BUS_EE	19
+#define RST_BUS_TCON0	20
+#define RST_BUS_CSI	21
+#define RST_BUS_ADDA	22
+#define RST_BUS_WLAN	23
+#define RST_MBUS	24
+#define RST_BUS_DRAM	25
+#define RST_BUS_PSRAM	26
+#define RST_BUS_DMA	27
+#define RST_BUS_UART0	28
+#define RST_BUS_UART1	29
+#define RST_BUS_UART2	30
+#define RST_BUS_UART3	31
+#define RST_BUS_UART4	32
+#define RST_BUS_UART5	33
+#define RST_BUS_I2C0	34
+#define RST_BUS_I2C1	35
+#define RST_BUS_I2C2	36
+#define RST_BUS_GPADC	37
+#define RST_BUS_KEYADC	38
+
+#endif
-- 
2.53.0