From: Jonathan Cameron <jic23@kernel.org>
To: Muhammad Abu Bakar <m.abubakar365@yahoo.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
dlechner@baylibre.com, nuno.sa@analog.com, andy@kernel.org,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 1/2] dt-bindings: iio: pressure: add Sensirion SDP31
Date: Sun, 27 Sep 2026 18:24:52 +0100 [thread overview]
Message-ID: <20260927182452.5755fba7@jic23-hlaptop> (raw)
In-Reply-To: <20260926154118.5471-2-m.abubakar365@yahoo.com>
On Sat, 26 Sep 2026 20:41:17 +0500
Muhammad Abu Bakar <m.abubakar365@yahoo.com> wrote:
> Add device tree bindings for the Sensirion SDP31 differential pressure
> sensor, an I2C device that also reports temperature.
>
> Signed-off-by: Muhammad Abu Bakar <m.abubakar365@yahoo.com>
I think you have been missing some replies for some reason.
See https://lore.kernel.org/all/20260920014032.2cc3c851@jic23-hlaptop/
Also the reply Krzysztof sent to point out you hadn't addressed all
the feedback on v1.
If you disagree with any suggestions then reply to that email.
Reviewers tend to stop reviewing very quickly if they see that stuff
they raised in previous versions hasn't been addressed yet.
Jonathan
> ---
> .../iio/pressure/sensirion,sdp31.yaml | 41 +++++++++++++++++++
> MAINTAINERS | 5 +++
> 2 files changed, 46 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/pressure/sensirion,sdp31.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp31.yaml b/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp31.yaml
> new file mode 100644
> index 000000000..a98e7c97e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp31.yaml
> @@ -0,0 +1,41 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/pressure/sensirion,sdp31.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sensirion SDP31 differential pressure sensor
> +
> +maintainers:
> + - Muhammad Abu Bakar <m.abubakar365@yahoo.com>
> +
> +description: |
> + Differential pressure sensor from Sensirion with an I2C interface.
> +
> +properties:
> + compatible:
> + const: sensirion,sdp31
> +
> + reg:
> + maxItems: 1
> +
> + vdd-supply: true
> +
> +required:
> + - compatible
> + - reg
> + - vdd-supply
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pressure@21 {
> + compatible = "sensirion,sdp31";
> + reg = <0x21>;
> + vdd-supply = <&vdd_3v3>;
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 214aeee76..e285147be 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -24855,6 +24855,11 @@ S: Maintained
> F: Documentation/devicetree/bindings/iio/chemical/sensirion,scd4x.yaml
> F: drivers/iio/chemical/scd4x.c
>
> +SENSIRION SDP31 DIFFERENTIAL PRESSURE SENSOR DRIVER
> +M: Muhammad Abu Bakar <m.abubakar365@yahoo.com>
> +S: Maintained
> +F: Documentation/devicetree/bindings/iio/pressure/sensirion,sdp31.yaml
> +
> SENSIRION SDP500 DIFFERENTIAL PRESSURE SENSOR DRIVER
> M: Petar Stoykov <petar.stoykov@prodrive-technologies.com>
> S: Maintained
next prev parent reply other threads:[~2026-09-27 17:24 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20260926154118.5471-1-m.abubakar365.ref@yahoo.com>
2026-09-26 15:41 ` [PATCH v3 0/2] iio: pressure: add Sensirion SDP31 driver Muhammad Abu Bakar
2026-09-26 15:41 ` [PATCH v3 1/2] dt-bindings: iio: pressure: add Sensirion SDP31 Muhammad Abu Bakar
2026-09-27 17:24 ` Jonathan Cameron [this message]
2026-09-26 15:41 ` [PATCH v3 2/2] iio: pressure: add Sensirion SDP31 driver Muhammad Abu Bakar
2026-09-27 17:35 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260927182452.5755fba7@jic23-hlaptop \
--to=jic23@kernel.org \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.abubakar365@yahoo.com \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®