From: Carlo Szelinsky <github@szelinsky.de>
To: Oleksij Rempel <o.rempel@pengutronix.de>,
Kory Maincent <kory.maincent@bootlin.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: Corey Leavitt <corey@leavitt.info>,
Jonas Jelonek <jelonek.jonas@gmail.com>,
Simon Horman <horms@kernel.org>,
Aleksander Jan Bajkowski <olek2@wp.pl>,
Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
netdev-bot+sashiko@kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org,
Carlo Szelinsky <github@szelinsky.de>
Subject: [PATCH net-next v7 5/5] net: phy: own phydev->psec via PSE notifier and remove fwnode_mdio hook
Date: Sun, 27 Sep 2026 21:18:50 +0200 [thread overview]
Message-ID: <20260927191850.1370515-6-github@szelinsky.de> (raw)
In-Reply-To: <20260927191850.1370515-1-github@szelinsky.de>
From: Corey Leavitt <corey@leavitt.info>
fwnode_mdiobus_register_phy() resolved the `pses` phandle during PHY
registration and stashed the result in phydev->psec. With a modular PSE
controller driver that lookup returns -EPROBE_DEFER until the module is
loaded, so the PHY - and any DSA switch behind it - keeps bouncing off
deferred probe. On some boards that shows up as a boot-time probe-retry
storm and PHYs that never register at all.
Transfer ownership of phydev->psec to phylib and drive it from the PSE
controller lifecycle notifier instead:
- On PSE_REGISTERED: walk mdio_bus_type and attach phydev->psec for
every registered phy whose psec is still NULL. This is the "phy was
enumerated before the PSE controller loaded" case, the root cause of
the retry storm.
- On PSE_UNREGISTERED: walk it again and release every phydev->psec
that targets the departing controller, before pse_release_pis()
frees pcdev->pi. Without this a phy still holding a reference would
cause a use-after-free in __pse_control_release()'s
pcdev->pi[psec->id] access.
- phy_device_register() attaches once for a controller that is already
registered. The phydev->psec check in phy_try_attach_pse() makes the
two paths idempotent.
fwnode_find_pse_control() and its call site go away, and fwnode_mdio
drops the PSE header. No PSE-originated -EPROBE_DEFER leaves the MDIO
layer any more, so the retry storm is gone.
The attach happens after device_add() has made the phy visible on
mdio_bus_type, and takes no rtnl. Two reasons it must not:
- Binding a phy that itself provides an SFP cage reaches
sfp_bus_add_upstream() via phy_probe() -> phy_setup_ports() ->
phy_sfp_probe(), and that takes rtnl_lock(). Reported on RTL8214FC.
- Some drivers register their MDIO bus from ndo_init - lantiq_etop via
ltq_etop_init(), sni_ave via ave_init() - which register_netdevice()
already calls under rtnl, and mdiobus_scan() reaches
phy_device_register() from there.
phydev->psec is therefore serialised by a dedicated mutex, taken through
pse_phy_lock(). It lives in pse_core rather than phylib because
net/ethtool is always built into vmlinux while PHYLIB is tristate, so a
phylib export would be unresolved with CONFIG_PHYLIB=m or =n;
PSE_CONTROLLER is bool, so pse_core is always reachable. The ethtool PSE
paths take the same mutex, so the use-after-free that rtnl used to close
stays closed. Lock order is rtnl -> pse_phy_mutex -> pse_list_mutex ->
pcdev->lock.
phy_device_remove() releases phydev->psec synchronously, while the phy
is still on the bus. A phy that has been device_del()'d but is still
pinned - an attached netdev, or an SFP module phy waiting for
phy_device_free() - is off the mdio_bus_type klist and so invisible to
the PSE_UNREGISTERED walk, and a deferred release would then touch a
pcdev->pi[] the controller has already freed. Releasing before
device_del() means the walk and the release contend for the same mutex,
so whichever runs second sees NULL.
phydev->psec_detached closes two windows around that, by telling
phy_try_attach_pse() to skip the phy. It is a plain bool rather than
another bit in the flags word: it is written under pse_phy_lock(), while
neighbours such as suspended and sysfs_links are written under
phydev->lock and rtnl, and a shared storage unit would make those
read-modify-write updates race. bus_for_each_dev() still reaches a
phy until bus_remove_device() takes it off the klist, which is well into
device_del(), so a PSE_REGISTERED walk could otherwise attach a fresh
handle just after the release, with nothing left to free it. The same
applies while the phy is being registered: device_add() puts it on the
bus before its own later failure points, and its unwind takes it back
off, so a handle attached in that window would be missed by the
PSE_UNREGISTERED walk as well. The flag is therefore held until
registration has actually succeeded, and set again from
phy_device_remove().
One note on behaviour. of_pse_control_get() reaches the hardware -
pse_pi_is_hw_enabled() calls pi_get_admin_state(), an i2c transaction on
tps23881, si3474, pd692x0 and realtek-pse-mcu - and that error used to
propagate out of fwnode_mdiobus_register_phy() and get retried by
deferred probe. Now a transient failure leaves the port without PSE
until the controller registers again; it is reported with phydev_warn()
rather than dropped silently. -EPROBE_DEFER stays silent because the
notifier retries it at PSE_REGISTERED time, and the preceding patch
makes sure an already registered controller cannot keep returning it.
The UNREGISTERED walk does not help rmmod either:
pse_control_get_internal() takes try_module_get(pcdev->owner) per
handle, so while a phy holds one the unload is refused before the module
exit path runs. What the walk covers is driver unbind and device
removal, where pse_controller_unregister() runs with the module loaded.
What makes the UNREGISTERED walk safe is the teardown order the preceding
patch establishes. By the time it runs the controller is already off
pse_controller_list and the interrupt is off, so nothing new can reach
the PI array; pcdev->pi and the power domains are still live, which the
release path needs because dropping the last reference can disable a PI
that is still energised; and the notification worker is drained after the
walk rather than before it, both because that release path can queue work
of its own and because the worker's own transient pse_control reference
must not become the last one once the array has been freed.
Now that the walk empties pcdev->pse_control_head on unregister, warn if
anything is still on it afterwards. Nothing can add one at that point:
the controller is off the list, the irq is off and the worker is
drained. It is quiet because of_pse_control_get() has a single caller
and the walk covers it, and it fires if a consumer that does not
subscribe is ever added.
The warning belongs here rather than with the reordering it sits in,
because until this patch the fwnode_mdio hook gives every matching phy a
handle for its lifetime and nothing releases it on controller unbind -
so an unbind between the two would trip it on any board where a phy
resolved a PI.
Reported-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Closes: https://lore.kernel.org/netdev/e00048dd-1ed3-40c3-9912-59bccf015ad5@gmail.com/
Reported-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Closes: https://lore.kernel.org/netdev/bac5e6e9-7358-4ccb-87fc-9c40baa33682@wp.pl/
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/netdev/20260703071025.100797-1-pabeni@redhat.com/
Signed-off-by: Corey Leavitt <corey@leavitt.info>
Co-developed-by: Carlo Szelinsky <github@szelinsky.de>
Signed-off-by: Carlo Szelinsky <github@szelinsky.de>
Tested-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Aleksander Jan Bajkowski <olek2@wp.pl>
---
drivers/net/mdio/fwnode_mdio.c | 34 --------
drivers/net/phy/phy_device.c | 139 ++++++++++++++++++++++++++++++++-
drivers/net/pse-pd/pse_core.c | 68 ++++++++++++++++
include/linux/phy.h | 7 ++
include/linux/pse-pd/pse.h | 32 ++++++++
net/ethtool/pse-pd.c | 16 ++--
6 files changed, 256 insertions(+), 40 deletions(-)
diff --git a/drivers/net/mdio/fwnode_mdio.c b/drivers/net/mdio/fwnode_mdio.c
index ba7091518265..7bd979b59f49 100644
--- a/drivers/net/mdio/fwnode_mdio.c
+++ b/drivers/net/mdio/fwnode_mdio.c
@@ -11,33 +11,11 @@
#include <linux/fwnode_mdio.h>
#include <linux/of.h>
#include <linux/phy.h>
-#include <linux/pse-pd/pse.h>
MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("FWNODE MDIO bus (Ethernet PHY) accessors");
-static struct pse_control *
-fwnode_find_pse_control(struct fwnode_handle *fwnode,
- struct phy_device *phydev)
-{
- struct pse_control *psec;
- struct device_node *np;
-
- if (!IS_ENABLED(CONFIG_PSE_CONTROLLER))
- return NULL;
-
- np = to_of_node(fwnode);
- if (!np)
- return NULL;
-
- psec = of_pse_control_get(np, phydev);
- if (PTR_ERR(psec) == -ENOENT)
- return NULL;
-
- return psec;
-}
-
static struct mii_timestamper *
fwnode_find_mii_timestamper(struct fwnode_handle *fwnode)
{
@@ -118,7 +96,6 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
struct fwnode_handle *child, u32 addr)
{
struct mii_timestamper *mii_ts = NULL;
- struct pse_control *psec = NULL;
struct phy_device *phy;
bool is_c45;
u32 phy_id;
@@ -159,14 +136,6 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
goto clean_phy;
}
- psec = fwnode_find_pse_control(child, phy);
- if (IS_ERR(psec)) {
- rc = PTR_ERR(psec);
- goto unregister_phy;
- }
-
- phy->psec = psec;
-
/* phy->mii_ts may already be defined by the PHY driver. A
* mii_timestamper probed via the device tree will still have
* precedence.
@@ -176,9 +145,6 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
return 0;
-unregister_phy:
- if (is_acpi_node(child) || is_of_node(child))
- phy_device_remove(phy);
clean_phy:
phy_device_free(phy);
clean_mii_ts:
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 5b13a74e2fa9..971d9326d226 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -26,6 +26,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/netdevice.h>
+#include <linux/notifier.h>
#include <linux/phy.h>
#include <linux/phylib_stubs.h>
#include <linux/phy_led_triggers.h>
@@ -1012,9 +1013,111 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
}
EXPORT_SYMBOL(get_phy_device);
+/* Best-effort attach of phydev->psec from a DT `pses = <&...>` phandle.
+ * Caller must hold pse_phy_lock(). A missing phandle (-ENOENT) or a
+ * not-yet-registered controller (-EPROBE_DEFER) is silent; the notifier
+ * retries the latter at PSE_REGISTERED time. Any other error means a broken
+ * binding and is warned about, but left non-fatal so the phy still registers.
+ *
+ * A phy with psec_detached set is skipped: it is either not registered yet
+ * or on its way out, and nothing would release a handle attached now.
+ */
+static void phy_try_attach_pse(struct phy_device *phydev)
+{
+ struct pse_control *psec;
+ struct device_node *np;
+
+ pse_phy_lock_assert_held();
+
+ np = phydev->mdio.dev.of_node;
+ if (!np)
+ return;
+
+ if (phydev->psec || phydev->psec_detached)
+ return;
+
+ psec = of_pse_control_get(np, phydev);
+ if (IS_ERR(psec)) {
+ if (PTR_ERR(psec) != -EPROBE_DEFER && PTR_ERR(psec) != -ENOENT)
+ phydev_warn(phydev, "failed to get PSE control: %pe\n",
+ psec);
+ return;
+ }
+
+ phydev->psec = psec;
+}
+
+static int phy_pse_attach_one(struct device *dev, void *data)
+{
+ pse_phy_lock_assert_held();
+
+ if (dev->type != &mdio_bus_phy_type)
+ return 0;
+
+ phy_try_attach_pse(to_phy_device(dev));
+ return 0;
+}
+
+static int phy_pse_detach_one(struct device *dev, void *data)
+{
+ struct pse_controller_dev *pcdev = data;
+ struct phy_device *phydev;
+ struct pse_control *psec;
+
+ pse_phy_lock_assert_held();
+
+ if (dev->type != &mdio_bus_phy_type)
+ return 0;
+
+ phydev = to_phy_device(dev);
+ psec = phydev->psec;
+ if (!psec || !pse_control_matches_pcdev(psec, pcdev))
+ return 0;
+
+ phydev->psec = NULL;
+ pse_control_put(psec);
+ return 0;
+}
+
+static int phy_pse_notifier_event(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ switch (event) {
+ case PSE_REGISTERED:
+ pse_phy_lock();
+ bus_for_each_dev(&mdio_bus_type, NULL, NULL,
+ phy_pse_attach_one);
+ pse_phy_unlock();
+ return NOTIFY_OK;
+ case PSE_UNREGISTERED:
+ pse_phy_lock();
+ bus_for_each_dev(&mdio_bus_type, NULL, data,
+ phy_pse_detach_one);
+ pse_phy_unlock();
+ return NOTIFY_OK;
+ default:
+ return NOTIFY_DONE;
+ }
+}
+
+static struct notifier_block phy_pse_notifier __read_mostly = {
+ .notifier_call = phy_pse_notifier_event,
+};
+
/**
* phy_device_register - Register the phy device on the MDIO bus
* @phydev: phy_device structure to be added to the MDIO bus
+ *
+ * phydev->psec is attached after device_add() has made the phy visible on
+ * mdio_bus_type, so that a concurrent PSE notifier walk and the attach can
+ * never leave the phy unattached. Neither step takes rtnl: keeping
+ * device_add() out of rtnl avoids deadlocking when binding a phy that itself
+ * provides an SFP cage (phy_probe() -> phy_sfp_probe() ->
+ * sfp_bus_add_upstream() takes rtnl), and pse_phy_lock() rather than rtnl
+ * guards the attach so a bus registered from ndo_init (which already holds
+ * rtnl) does not recurse on it.
+ *
+ * Return: 0 on success, negative error code on failure.
*/
int phy_device_register(struct phy_device *phydev)
{
@@ -1034,12 +1137,25 @@ int phy_device_register(struct phy_device *phydev)
goto out;
}
+ /* Keep the PSE_REGISTERED walk off this phy until registration has
+ * actually succeeded. device_add() puts the phy on the bus before its
+ * own later failure points, and its unwind takes it back off, so a
+ * handle attached in that window would be missed by the
+ * PSE_UNREGISTERED walk as well and left with no owner.
+ */
+ phydev->psec_detached = true;
+
err = device_add(&phydev->mdio.dev);
if (err) {
phydev_err(phydev, "failed to add\n");
goto out;
}
+ pse_phy_lock();
+ phydev->psec_detached = false;
+ phy_try_attach_pse(phydev);
+ pse_phy_unlock();
+
return 0;
out:
@@ -1061,8 +1177,22 @@ EXPORT_SYMBOL(phy_device_register);
*/
void phy_device_remove(struct phy_device *phydev)
{
+ struct pse_control *psec;
+
unregister_mii_timestamper(phydev->mii_ts);
- pse_control_put(phydev->psec);
+
+ /* Detach synchronously, before the phy leaves the bus, so the put cannot
+ * outlive the PSE controller: an off-bus but still-pinned phy is missed
+ * by the PSE_UNREGISTERED walk. pse_phy_lock() serialises against that
+ * walk, and psec_detached keeps the PSE_REGISTERED walk from attaching a
+ * new handle in the window before device_del() takes the phy off the bus.
+ */
+ pse_phy_lock();
+ psec = phydev->psec;
+ phydev->psec = NULL;
+ phydev->psec_detached = true;
+ pse_control_put(psec);
+ pse_phy_unlock();
device_del(&phydev->mdio.dev);
@@ -3976,8 +4106,14 @@ static int __init phy_init(void)
if (rc)
goto err_c45;
+ rc = pse_register_notifier(&phy_pse_notifier);
+ if (rc)
+ goto err_genphy;
+
return 0;
+err_genphy:
+ phy_driver_unregister(&genphy_driver);
err_c45:
phy_driver_unregister(&genphy_c45_driver);
err_ethtool_phy_ops:
@@ -3994,6 +4130,7 @@ static int __init phy_init(void)
static void __exit phy_exit(void)
{
+ pse_unregister_notifier(&phy_pse_notifier);
phy_driver_unregister(&genphy_c45_driver);
phy_driver_unregister(&genphy_driver);
rtnl_lock();
diff --git a/drivers/net/pse-pd/pse_core.c b/drivers/net/pse-pd/pse_core.c
index 457eef5784f8..20d33f7af743 100644
--- a/drivers/net/pse-pd/pse_core.c
+++ b/drivers/net/pse-pd/pse_core.c
@@ -25,8 +25,55 @@ static LIST_HEAD(pse_controller_list);
static DEFINE_XARRAY_ALLOC(pse_pw_d_map);
static DEFINE_MUTEX(pse_pw_d_mutex);
+/* Serialises phydev->psec against the PSE controller lifecycle notifier and
+ * the ethtool PSE paths, in place of rtnl. The attach must not take rtnl: an
+ * MDIO bus registered from ndo_init (e.g. lantiq_etop) calls
+ * phy_device_register() with rtnl already held, so taking rtnl for the attach
+ * would deadlock. It lives here rather than in phylib because PSE_CONTROLLER
+ * is bool, so pse_core is always built into vmlinux and net/ethtool can call
+ * these directly; phylib is tristate and must not be linked against from
+ * built-in code. Lock order: rtnl -> pse_phy_mutex -> pse_list_mutex ->
+ * pcdev->lock.
+ */
+static DEFINE_MUTEX(pse_phy_mutex);
+
static BLOCKING_NOTIFIER_HEAD(pse_controller_notifier);
+/**
+ * pse_phy_lock - serialise access to phydev->psec
+ *
+ * Held by the PSE controller lifecycle notifier, by the phy attach and detach
+ * paths and by the ethtool PSE paths. The PSE_UNREGISTERED walk clears
+ * phydev->psec and drops the phy's reference under this lock, so anything that
+ * attaches, detaches or dereferences phydev->psec must hold it across the
+ * whole access.
+ */
+void pse_phy_lock(void)
+{
+ mutex_lock(&pse_phy_mutex);
+}
+EXPORT_SYMBOL_GPL(pse_phy_lock);
+
+/**
+ * pse_phy_unlock - release the lock taken by pse_phy_lock()
+ */
+void pse_phy_unlock(void)
+{
+ mutex_unlock(&pse_phy_mutex);
+}
+EXPORT_SYMBOL_GPL(pse_phy_unlock);
+
+#ifdef CONFIG_LOCKDEP
+/**
+ * pse_phy_lock_assert_held - assert that pse_phy_lock() is held
+ */
+void pse_phy_lock_assert_held(void)
+{
+ lockdep_assert_held(&pse_phy_mutex);
+}
+EXPORT_SYMBOL_GPL(pse_phy_lock_assert_held);
+#endif
+
/**
* pse_register_notifier - register a callback for PSE controller events
* @nb: notifier block to register
@@ -1271,6 +1318,13 @@ void pse_controller_unregister(struct pse_controller_dev *pcdev)
*/
cancel_work_sync(&pcdev->ntf_work);
+ /* Every handle should be gone here: subscribers drop theirs in the
+ * event above, and the worker's transient one goes with the drain.
+ * The controller is off the list and the irq is off, so nothing can
+ * add one. Anything left is a holder nobody accounted for.
+ */
+ WARN_ON(!list_empty(&pcdev->pse_control_head));
+
pse_flush_pw_ds(pcdev);
pse_release_pis(pcdev);
kfifo_free(&pcdev->ntf_fifo);
@@ -2132,3 +2186,17 @@ bool pse_has_c33(struct pse_control *psec)
return psec->pcdev->types & ETHTOOL_PSE_C33;
}
EXPORT_SYMBOL_GPL(pse_has_c33);
+
+/**
+ * pse_control_matches_pcdev - Test whether a pse_control targets a controller
+ * @psec: pse_control obtained from of_pse_control_get()
+ * @pcdev: PSE controller to compare against
+ *
+ * Return: %true if @psec was obtained from @pcdev, %false otherwise.
+ */
+bool pse_control_matches_pcdev(struct pse_control *psec,
+ struct pse_controller_dev *pcdev)
+{
+ return psec->pcdev == pcdev;
+}
+EXPORT_SYMBOL_GPL(pse_control_matches_pcdev);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 7c5098a0dd6c..ef5b5e6f4e0f 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -666,6 +666,12 @@ struct phy_oatc14_sqi_capability {
* @master_slave_state: Current master/slave configuration
* @mii_ts: Pointer to time stamper callbacks
* @psec: Pointer to Power Sourcing Equipment control struct
+ * @psec_detached: Set while phylib will not accept a PSE handle for this
+ * phy, either because registration has not completed or because it has
+ * already released @psec, so the PSE_REGISTERED notifier walk skips it.
+ * Not a bitfield: once the phy is on the bus it is written under
+ * pse_phy_lock() while other flags are written under phydev->lock or
+ * rtnl, and they must not share a storage unit
* @ports: List of PHY ports structures
* @n_ports: Number of ports currently attached to the PHY
* @max_n_ports: Max number of ports this PHY can expose
@@ -807,6 +813,7 @@ struct phy_device {
struct net_device *attached_dev;
struct mii_timestamper *mii_ts;
struct pse_control *psec;
+ bool psec_detached;
struct list_head ports;
int n_ports;
diff --git a/include/linux/pse-pd/pse.h b/include/linux/pse-pd/pse.h
index bc5d36bcd993..16181f8a2c97 100644
--- a/include/linux/pse-pd/pse.h
+++ b/include/linux/pse-pd/pse.h
@@ -386,9 +386,23 @@ int pse_ethtool_set_prio(struct pse_control *psec,
bool pse_has_podl(struct pse_control *psec);
bool pse_has_c33(struct pse_control *psec);
+bool pse_control_matches_pcdev(struct pse_control *psec,
+ struct pse_controller_dev *pcdev);
+
int pse_register_notifier(struct notifier_block *nb);
int pse_unregister_notifier(struct notifier_block *nb);
+void pse_phy_lock(void);
+void pse_phy_unlock(void);
+
+#ifdef CONFIG_LOCKDEP
+void pse_phy_lock_assert_held(void);
+#else
+static inline void pse_phy_lock_assert_held(void)
+{
+}
+#endif
+
#else
static inline struct pse_control *of_pse_control_get(struct device_node *node,
@@ -439,6 +453,12 @@ static inline bool pse_has_c33(struct pse_control *psec)
return false;
}
+static inline bool pse_control_matches_pcdev(struct pse_control *psec,
+ struct pse_controller_dev *pcdev)
+{
+ return false;
+}
+
static inline int pse_register_notifier(struct notifier_block *nb)
{
return 0;
@@ -449,6 +469,18 @@ static inline int pse_unregister_notifier(struct notifier_block *nb)
return 0;
}
+static inline void pse_phy_lock(void)
+{
+}
+
+static inline void pse_phy_unlock(void)
+{
+}
+
+static inline void pse_phy_lock_assert_held(void)
+{
+}
+
#endif
#endif
diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index 757c9e0cc856..654325946aaa 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -71,7 +71,9 @@ static int pse_prepare_data(const struct ethnl_req_info *req_base,
if (ret < 0)
return ret;
+ pse_phy_lock();
ret = pse_get_pse_attributes(phydev, info->extack, data);
+ pse_phy_unlock();
ethnl_ops_complete(dev);
@@ -281,9 +283,12 @@ ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
phydev = ethnl_req_get_phydev(req_info, tb, ETHTOOL_A_PSE_HEADER,
info->extack);
+
+ pse_phy_lock();
+
ret = ethnl_set_pse_validate(phydev, info);
if (ret)
- return ret;
+ goto out;
if (tb[ETHTOOL_A_PSE_PRIO]) {
unsigned int prio;
@@ -291,7 +296,7 @@ ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
prio = nla_get_u32(tb[ETHTOOL_A_PSE_PRIO]);
ret = pse_ethtool_set_prio(phydev->psec, info->extack, prio);
if (ret)
- return ret;
+ goto out;
}
if (tb[ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT]) {
@@ -301,7 +306,7 @@ ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
ret = pse_ethtool_set_pw_limit(phydev->psec, info->extack,
pw_limit);
if (ret)
- return ret;
+ goto out;
}
/* These values are already validated by the ethnl_pse_set_policy */
@@ -319,10 +324,11 @@ ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
*/
ret = pse_ethtool_set_config(phydev->psec, info->extack,
&config);
- if (ret)
- return ret;
}
+out:
+ pse_phy_unlock();
+
/* Return errno or zero - PSE has no notification */
return ret;
}
--
2.43.0
next prev parent reply other threads:[~2026-09-27 19:19 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-27 19:18 [PATCH net-next v7 0/5] net: pse-pd: decouple controller lookup from MDIO probe Carlo Szelinsky
2026-09-27 19:18 ` [PATCH net-next v7 1/5] net: pse-pd: add notifier chain for controller lifecycle events Carlo Szelinsky
2026-09-27 19:18 ` [PATCH net-next v7 2/5] net: pse-pd: fire lifecycle events on controller register/unregister Carlo Szelinsky
2026-09-30 0:19 ` netdev-bot+sashiko
2026-09-27 19:18 ` [PATCH net-next v7 3/5] net: pse-pd: unwind allocations when controller registration fails Carlo Szelinsky
2026-09-30 0:19 ` netdev-bot+sashiko
2026-09-27 19:18 ` [PATCH net-next v7 4/5] net: pse-pd: check the PI vpwr supply before registering the controller Carlo Szelinsky
2026-09-30 0:19 ` netdev-bot+sashiko
2026-09-27 19:18 ` Carlo Szelinsky [this message]
2026-09-30 0:19 ` [PATCH net-next v7 5/5] net: phy: own phydev->psec via PSE notifier and remove fwnode_mdio hook netdev-bot+sashiko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260927191850.1370515-6-github@szelinsky.de \
--to=github@szelinsky.de \
--cc=andrew+netdev@lunn.ch \
--cc=broonie@kernel.org \
--cc=corey@leavitt.info \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=jelonek.jonas@gmail.com \
--cc=kory.maincent@bootlin.com \
--cc=kuba@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev-bot+sashiko@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=olek2@wp.pl \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®