mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nicolai Buchwitz <nb@tipi-net.de>
To: Doug Berger <opendmb@gmail.com>,
	Florian Fainelli <florian.fainelli@broadcom.com>,
	Nicolai Buchwitz <nb@tipi-net.de>,
	Broadcom internal kernel review list
	<bcm-kernel-feedback-list@broadcom.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: Justin Chen <justin.chen@broadcom.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net] net: bcmgenet: fix NULL dereference in set_coalesce before first open
Date: Mon, 28 Sep 2026 12:56:41 +0200	[thread overview]
Message-ID: <20260928105642.856210-1-nb@tipi-net.de> (raw)

The Rx ring priv and index are only set in bcmgenet_init_rx_ring(),
which runs at open. Setting the Rx coalescing parameters on an interface
that was never opened, e.g. "ethtool -C eth0 rx-usecs 50", dereferences
a NULL ring->priv. The oops happens with RTNL held, so networking
stays stuck until a reboot:

  Unable to handle kernel paging request at virtual address 0000000000002788
  pc : bcmgenet_set_rx_coalesce.isra.0+0x10/0x88
  lr : bcmgenet_set_coalesce+0xe8/0x180
  Call trace:
   bcmgenet_set_rx_coalesce.isra.0+0x10/0x88 (P)
   __ethnl_set_coalesce.isra.0+0x490/0x570
   ethnl_set_coalesce+0x48/0xc0
   ethnl_default_set_doit+0xf4/0x230
   genl_family_rcv_msg_doit+0xe8/0x160
   genl_rcv_msg+0x220/0x2a0
   netlink_rcv_skb+0x68/0x140
   genl_rcv+0x40/0x60
   netlink_unicast+0x338/0x3c0
   netlink_sendmsg+0x19c/0x3f8
   __sock_sendmsg+0x64/0xc0
   __sys_sendto+0x124/0x198
   __arm64_sys_sendto+0x30/0x48

Set priv and index at probe. Writing the registers while the interface
is down is harmless because open resets the MAC and
bcmgenet_init_rx_coalesce() reapplies the stored values.

Fixes: 9f4ca05827a2 ("net: bcmgenet: Add support for adaptive RX coalescing")
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index f725d26e6020..e8908916558b 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -4151,8 +4151,11 @@ static int bcmgenet_probe(struct platform_device *pdev)
 	netif_set_real_num_rx_queues(priv->dev, priv->hw_params->rx_queues + 1);
 
 	/* Set default coalescing parameters */
-	for (i = 0; i <= priv->hw_params->rx_queues; i++)
+	for (i = 0; i <= priv->hw_params->rx_queues; i++) {
+		priv->rx_rings[i].priv = priv;
+		priv->rx_rings[i].index = i;
 		priv->rx_rings[i].rx_max_coalesced_frames = 1;
+	}
 
 	/* Initialize u64 stats seq counter for 32bit machines */
 	for (i = 0; i <= GENET_MAX_MQ_CNT; i++) {
-- 
2.53.0


             reply	other threads:[~2026-09-28 10:57 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-28 10:56 Nicolai Buchwitz [this message]
2026-09-28 10:59 ` netdev-bot+sinfo
2026-09-28 11:03   ` Nicolai Buchwitz
2026-09-28 17:29 ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260928105642.856210-1-nb@tipi-net.de \
    --to=nb@tipi-net.de \
    --cc=andrew+netdev@lunn.ch \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=florian.fainelli@broadcom.com \
    --cc=justin.chen@broadcom.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=opendmb@gmail.com \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®