From: Ivan Vecera <ivecera@redhat.com>
To: netdev@vger.kernel.org
Cc: Chris du Quesnay <Chris.duQuesnay@microchip.com>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>,
Jakub Kicinski <kuba@kernel.org>, Jiri Pirko <jiri@resnulli.us>,
Min Li <min.li@microchip.com>, Paolo Abeni <pabeni@redhat.com>,
Petr Oros <poros@redhat.com>,
Richard Cochran <richardcochran@gmail.com>,
Vadim Fedorenko <vadim.fedorenko@linux.dev>,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next 4/6] dpll: zl3073x: consolidate pin capabilities into bitmap
Date: Mon, 28 Sep 2026 20:55:50 +0200 [thread overview]
Message-ID: <20260928185552.1103515-5-ivecera@redhat.com> (raw)
In-Reply-To: <20260928185552.1103515-1-ivecera@redhat.com>
Replace the per-pin 'esync_control' boolean with a 'caps' bitmap in
struct zl3073x_dpll_pin. The bitmap is built from the pin properties
during pin registration and is easily extensible with further per-pin
capabilities.
No functional change intended.
Tested-by: Chris du Quesnay <Chris.duQuesnay@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
drivers/dpll/zl3073x/dpll.c | 27 +++++++++++++++++++++------
1 file changed, 21 insertions(+), 6 deletions(-)
diff --git a/drivers/dpll/zl3073x/dpll.c b/drivers/dpll/zl3073x/dpll.c
index 426974b0b5dc5c..fcf91aba2988af 100644
--- a/drivers/dpll/zl3073x/dpll.c
+++ b/drivers/dpll/zl3073x/dpll.c
@@ -38,7 +38,7 @@
* @dir: pin direction
* @id: pin id
* @prio: pin priority <0, 14>
- * @esync_control: embedded sync is controllable
+ * @caps: pin capabilities (ZL3073X_DPLL_PIN_CAP_*)
* @phase_gran: phase adjustment granularity
* @operstate: last saved operational state
* @phase_offset: last saved pin phase offset
@@ -55,7 +55,7 @@ struct zl3073x_dpll_pin {
enum dpll_pin_direction dir;
u8 id;
u8 prio;
- bool esync_control;
+ u8 caps;
s32 phase_gran;
enum dpll_pin_operstate operstate;
s64 phase_offset;
@@ -63,6 +63,17 @@ struct zl3073x_dpll_pin {
u32 measured_freq;
};
+/*
+ * DPLL pin capabilities
+ */
+enum zl3073x_dpll_pin_caps {
+ ZL3073X_DPLL_PIN_CAP_ESYNC_BIT,
+ ZL3073X_DPLL_PIN_CAPS_NBITS /* must be last */
+};
+
+#define __ZL3073X_DPLL_PIN_CAP(name) BIT(ZL3073X_DPLL_PIN_CAP_##name##_BIT)
+#define ZL3073X_DPLL_PIN_CAP_ESYNC __ZL3073X_DPLL_PIN_CAP(ESYNC)
+
/*
* Supported esync ranges for input and for output per output pair type
*/
@@ -189,7 +200,8 @@ zl3073x_dpll_input_pin_esync_get(const struct dpll_pin *dpll_pin,
ref_id = zl3073x_input_pin_ref_get(pin->id);
ref = zl3073x_ref_state_get(zldev, ref_id);
- if (!pin->esync_control || zl3073x_ref_freq_get(ref) <= 1)
+ if (!(pin->caps & ZL3073X_DPLL_PIN_CAP_ESYNC) ||
+ zl3073x_ref_freq_get(ref) <= 1)
return -EOPNOTSUPP;
esync->range = esync_freq_ranges;
@@ -897,7 +909,7 @@ zl3073x_dpll_output_pin_esync_get(const struct dpll_pin *dpll_pin,
synth_freq = zl3073x_synth_freq_get(synth);
out_freq = synth_freq / out->div;
- if (!pin->esync_control || out_freq <= 1)
+ if (!(pin->caps & ZL3073X_DPLL_PIN_CAP_ESYNC) || out_freq <= 1)
return -EOPNOTSUPP;
esync->range = esync_freq_ranges;
@@ -1837,14 +1849,17 @@ zl3073x_dpll_pin_register(struct zl3073x_dpll_pin *pin, u32 index)
if (IS_ERR(props))
return PTR_ERR(props);
- /* Save package label, fwnode, esync capability and phase adjust
+ /* Save package label, fwnode, capabilities and phase adjust
* granularity.
*/
strscpy(pin->label, props->package_label);
pin->fwnode = fwnode_handle_get(props->fwnode);
- pin->esync_control = props->esync_control;
pin->phase_gran = props->dpll_props.phase_gran;
+ pin->caps = 0;
+ if (props->esync_control)
+ pin->caps |= ZL3073X_DPLL_PIN_CAP_ESYNC;
+
if (zl3073x_dpll_is_input_pin(pin)) {
const struct zl3073x_chan *chan;
u8 ref;
--
2.55.0
next prev parent reply other threads:[~2026-09-28 18:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-28 18:55 [PATCH net-next 0/6] dpll: zl3073x: add PTP periodic output support Ivan Vecera
2026-09-28 18:55 ` [PATCH net-next 1/6] dpll: zl3073x: notify sibling pin when shared output config changes Ivan Vecera
2026-09-28 18:55 ` [PATCH net-next 2/6] dpll: zl3073x: add GPO support for output pins Ivan Vecera
2026-09-28 18:55 ` [PATCH net-next 3/6] dpll: zl3073x: allow enabling/disabling " Ivan Vecera
2026-09-28 18:55 ` Ivan Vecera [this message]
2026-09-28 18:55 ` [PATCH net-next 5/6] dpll: zl3073x: factor out output pin frequency helper Ivan Vecera
2026-09-28 18:55 ` [PATCH net-next 6/6] dpll: zl3073x: add PTP periodic output support Ivan Vecera
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260928185552.1103515-5-ivecera@redhat.com \
--to=ivecera@redhat.com \
--cc=Chris.duQuesnay@microchip.com \
--cc=arkadiusz.kubalewski@intel.com \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=min.li@microchip.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=poros@redhat.com \
--cc=richardcochran@gmail.com \
--cc=vadim.fedorenko@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®