From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-pz2-f37.google.com (mail-pz2-f37.google.com [74.125.228.37]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 9D5413D669F for ; Tue, 29 Sep 2026 02:09:11 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=74.125.228.37 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1790647754; cv=none; b=ggDIIgme3XH6AWK6zMw/VsBdrlSTWVYfjpjL1S0GwhHF6YPJ0UsvX0O2Os/w393Y8YuQZkYNt8cn2M8RwNLiQWO1JlfXpe0B1+mS3TUBgMs7OpkodgtUvV1wMP5xS9B92yO1wBAYFi0wOM6SPzhMFNm10+zsRlUr/Av7AMLOyHY= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1790647754; c=relaxed/simple; bh=wLXtZ9WcDFAKaciDt7nPW58iScJ90cbrlhPOJ1+P88c=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=oaAH1QnWqNdllqCaUfEhgonXTSoV7rcacRvMpyuvdJiX1IoCgFyiHHfPvdJRiFSf0r15KIpppBvQNM3ihVpzG3tzMZ1WHOuDA2gAlwvZZBP6W2El5Mjr1Gy7uWRwoJXbvzYrRszCB7f1/WSkFTNR8EncKuiRpxEcDVdY2qbMV0k= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=BqZ+clc/; arc=none smtp.client-ip=74.125.228.37 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="BqZ+clc/" Received: by mail-pz2-f37.google.com with SMTP id 41be03b00d2f7-cc7c4c92477so80645a12.0 for ; Mon, 28 Sep 2026 19:09:11 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1790647751; x=1791252551; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to:content-type; bh=VPFOb3bLA/ZSA6JL0UaEkymXhJBP9FqAC7OstzT1Pf4=; b=BqZ+clc/GpSM/sVqCyqJmotOxl9CaBK2MvuebAZXzAZOvuvrozTQVWm6X4R5AjP3o5 ZKkJl22QErVqbyPjPYLlI3m0f41O9GlIgyrSrBg6DVYI7cPEwiNXtjU2dnEM397uV+iq XAo6kDeOid4GAjEjsMaV9ORThuwyCeBhIBHUTeKd4J9uIsieDV2jf+5mUWrJJafop1H9 EfgDj6tnOWfHP0WN4gKNhgFOnVMBKpm0RN8lwdv9Kb2UatCnMf5LOmTgfh2D+40J6hvH TBgHfWvp+Q16SswMAnK93zioRYsc9bjm0EBZStmo/TJ9YXZ3/VTWx69GFpKVwgNq6hTv rr6g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20260707; t=1790647751; x=1791252551; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-gg:x-gm-message-state:from :to:cc:subject:date:message-id:reply-to:content-type; bh=VPFOb3bLA/ZSA6JL0UaEkymXhJBP9FqAC7OstzT1Pf4=; b=sGVFcul9xPE7rhPNpMrgv0F0WPVKZ6MWl3hQ5IGxE85OJJtr8soWrh5Au9WptwKMha ncsHbNZvVZFxjCCJlehpJeoY7txHcdI2XfZr5wBUKDaHFFJ8Gzf5b3wHezKS2iRHmR/k LMAoj3mb36ymom/cYBp6Bm231jcEjYXNpBR8Oe/0f3aImpzfztDe/N40d0dGLaidOfCz qpPxgGu3vu6f7D5QGgAqscTkywKFWpC1bJOe6nXjIA5jFw3sj4Lcn2e9EULymE1XL1b5 OY6dCZOBt4oX6UQd9KrXIy0PGuKxBhASXC0njCGe3M5GiyQeXPgIiPOD724FDWIDBFZs +qew== X-Forwarded-Encrypted: i=1; AKwUvBzG60Ofmjkv3JuNxoSCsuKKpLYHrj2LIRfVZWsDzDeNDWJ+r5XaRlNU1uMZXkWXeEiH7bwAWgGgzfLPCYE=@vger.kernel.org X-Gm-Message-State: AFuF++l+LHFmHXHYcMWkEhWS/l1GtpUK5mCFiIT6+qyhuJlRqoR6hrOA wo3IG+q1ooecK+awIa/zO3H3GmbwuHJyPh9ESPQTjs6MCTRhilB3oDB3 X-Gm-Gg: AYBFou1epYN9bAlWcj+AC+aF/i+mYqthq7/KJ3vD+8N29AVXAaKh1AgXMZA69LnT9iW ayPkD95zmaqVDzQNe5MgPYzn/nDqv4bRr92GlyVj/h5GgJwK/g1qjC1XLbAxMp9/woMdEBdxiF+ sOy/vFi/5VghDajBshaKVry8dyCCKNRTzHJJeQiyE67U5rn/8Ese9M0SsVSintNh1k2XXN9+ZX1 GoXTu3DWzJOj0xDP0DsXX5VXozNln09hocbae+LqqYrCw4y2XhZw1DC1jZHujyEjjLpIPIx2qXK R8HTwvVHeau0kSEbkoRztR9Vk/2Mt2PMsjiSNPjFHwvim+hRbdgl5YBIWuGBmIa3effvMqTL33i CMaOLBP7Vzp7i6U/y//VGxzEM2knBM+K29cIQ4o4FpUjozeidEuk2GNFIo41Qsyhb2+gsIOzJBY Qkf+z1j+usYD2tIIdo85ZhMTtBcL8efOf7RnVlUe0ZSPR9r6be7FfVGCRxYJ3TnTgB6AvPB4mVj 8vS3BCx9sD5osid3QqyT1UwHq7IQkSnzYkemde/drz91trtMNUMQnZhALRuFEU= X-Received: by 2002:a05:6a21:e93:b0:3dd:a196:53a4 with SMTP id adf61e73a8af0-3de0e97b9camr15095494637.70.1790647750876; Mon, 28 Sep 2026 19:09:10 -0700 (PDT) Received: from localhost.localdomain (60-250-196-139.hinet-ip.hinet.net. [60.250.196.139]) by smtp.gmail.com with ESMTPSA id 41be03b00d2f7-cc78796cf39sm5448596a12.32.2026.09.28.19.09.07 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 28 Sep 2026 19:09:10 -0700 (PDT) From: Joey Lu To: Vinod Koul , Neil Armstrong Cc: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Arnd Bergmann , Catalin Marinas , Jacky Huang , Shan-Chun Hung , Hui-Ping Chen , Joey Lu , linux-phy@lists.infradead.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Joey Lu Subject: [PATCH v6 3/3] phy: nuvoton: phy-ma35d1-usb2: extend to dual-port with OTG support Date: Tue, 29 Sep 2026 10:08:54 +0800 Message-ID: <20260929020854.1282339-4-a0987203069@gmail.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20260929020854.1282339-1-a0987203069@gmail.com> References: <20260929020854.1282339-1-a0987203069@gmail.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit PHY0 and PHY1 use the same power-on/reset sequence in USBPMISCR, with PHY1 control bits shifted 16 positions relative to PHY0. A separate driver for PHY1 would duplicate this logic, so the existing driver is extended to manage both ports. The original driver polled only DEVCKSTB after releasing PHY0 from reset. When USB0 operates in host mode (USB ID pin floating or tied high) only HSTCKSTB and CK12MSTB assert; DEVCKSTB never sets. Polling exclusively for DEVCKSTB in host mode causes a 1 ms timeout on every phy_init() call from the EHCI driver. The init callback is changed to accept either host-mode or device-mode clock stability, whichever asserts first. The power_on and power_off callbacks are replaced by a single init callback that handles PHY reset and clock-stable polling, because there is no PHY-specific clock gate on MA35D1; the PHY analog block derives its reference from the HXT crystal. A read-only USB role switch is registered for PHY0 to expose the USB0 role to userspace via the standard role-switch sysfs interface. The .set callback returns -EOPNOTSUPP because the hardware mux is fully automatic with no software override path. When CONFIG_USB_ROLE_SWITCH is not enabled, the registration returns -ENODEV and the driver skips the role switch gracefully without failing probe. Two new optional device-tree properties are implemented: - nuvoton,rcalcode: writes per-port 4-bit resistor calibration trim codes to the RCALCODE field in USBPMISCR. - nuvoton,oc-active-high: sets the UHOVRCURH bit in MISCFCR0 to treat the over-current detect input as active-high. Signed-off-by: Joey Lu --- drivers/phy/nuvoton/phy-ma35d1-usb2.c | 286 +++++++++++++++++++------- 1 file changed, 211 insertions(+), 75 deletions(-) diff --git a/drivers/phy/nuvoton/phy-ma35d1-usb2.c b/drivers/phy/nuvoton/phy-ma35d1-usb2.c index 9a459b700ed4..547c7d55d8ff 100644 --- a/drivers/phy/nuvoton/phy-ma35d1-usb2.c +++ b/drivers/phy/nuvoton/phy-ma35d1-usb2.c @@ -1,11 +1,16 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2024 Nuvoton Technology Corp. + * Nuvoton MA35D1 USB 2.0 PHY driver + * + * Supports PHY0 (USB0 OTG port, shared between DWC2 gadget and EHCI0/OHCI0) + * and PHY1 (USB1 host-only port, used by EHCI1/OHCI1). The hardware mux on + * PHY0 switches automatically via the USB ID pin. + * + * Copyright (C) 2026 Nuvoton Technology Corp. */ #include #include #include -#include #include #include #include @@ -13,131 +18,262 @@ #include #include #include +#include -/* USB PHY Miscellaneous Control Register */ -#define MA35_SYS_REG_USBPMISCR 0x60 -#define PHY0POR BIT(0) /* PHY Power-On Reset Control Bit */ -#define PHY0SUSPEND BIT(1) /* PHY Suspend; 0: suspend, 1: operaion */ -#define PHY0COMN BIT(2) /* PHY Common Block Power-Down Control */ -#define PHY0DEVCKSTB BIT(10) /* PHY 60 MHz UTMI clock stable bit */ +#define MA35_SYS_PWRONOTP 0x04 +#define PWRONOTP_USBP0ID BIT(16) + +#define MA35_SYS_USBPMISCR 0x60 +#define USBPMISCR_PHY_POR(n) BIT(0 + (n) * 16) +#define USBPMISCR_PHY_SUSPEND(n) BIT(1 + (n) * 16) +#define USBPMISCR_PHY_COMN(n) BIT(2 + (n) * 16) +#define USBPMISCR_PHY_HSTCKSTB(n) BIT(8 + (n) * 16) +#define USBPMISCR_PHY_CK12MSTB(n) BIT(9 + (n) * 16) +#define USBPMISCR_PHY_DEVCKSTB(n) BIT(10 + (n) * 16) +/* Mask for control bits (POR, SUSPEND, COMN) */ +#define USBPMISCR_PHY_CTL_MASK(n) (0x7u << ((n) * 16)) +/* Host-mode ready */ +#define USBPMISCR_PHY_HOST_READY(n) (USBPMISCR_PHY_SUSPEND(n) | \ + USBPMISCR_PHY_HSTCKSTB(n) | \ + USBPMISCR_PHY_CK12MSTB(n)) +/* Device-mode ready */ +#define USBPMISCR_PHY_DEV_READY(n) (USBPMISCR_PHY_SUSPEND(n) | \ + USBPMISCR_PHY_DEVCKSTB(n)) +/* RCALCODE: 4-bit resistor trim */ +#define USBPMISCR_RCAL_SHIFT(n) (12 + (n) * 16) +#define USBPMISCR_RCAL_MASK(n) GENMASK(USBPMISCR_RCAL_SHIFT(n) + 3, \ + USBPMISCR_RCAL_SHIFT(n)) + +#define MA35_SYS_MISCFCR0 0x70 +/* USB host over-current detect polarity (shared, both ports) */ +#define MISCFCR0_UHOVRCURH BIT(12) + +#define MA35_PHY_NUM 2 + +struct ma35_phy_port { + struct phy *phy; + unsigned int idx; +}; struct ma35_usb_phy { - struct clk *clk; struct device *dev; struct regmap *sysreg; + struct ma35_phy_port port[MA35_PHY_NUM]; + struct usb_role_switch *role_sw; }; -static int ma35_usb_phy_power_on(struct phy *phy) +static int ma35_usb_phy_init(struct phy *phy) { - struct ma35_usb_phy *p_phy = phy_get_drvdata(phy); + struct ma35_phy_port *port = phy_get_drvdata(phy); + struct ma35_usb_phy *p = container_of(port - port->idx, + struct ma35_usb_phy, port[0]); + unsigned int n = port->idx; unsigned int val; int ret; - ret = clk_prepare_enable(p_phy->clk); - if (ret < 0) { - dev_err(p_phy->dev, "Failed to enable PHY clock: %d\n", ret); - return ret; + regmap_read(p->sysreg, MA35_SYS_USBPMISCR, &val); + + if (!(val & USBPMISCR_PHY_SUSPEND(n))) { + regmap_update_bits(p->sysreg, MA35_SYS_USBPMISCR, + USBPMISCR_PHY_CTL_MASK(n), + USBPMISCR_PHY_POR(n) | USBPMISCR_PHY_SUSPEND(n)); + udelay(20); + + regmap_update_bits(p->sysreg, MA35_SYS_USBPMISCR, + USBPMISCR_PHY_CTL_MASK(n), + USBPMISCR_PHY_SUSPEND(n)); } - regmap_read(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, &val); - if (val & PHY0SUSPEND) { - /* - * USB PHY0 is in operation mode already - * make sure USB PHY 60 MHz UTMI Interface Clock ready - */ - ret = regmap_read_poll_timeout(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, val, - val & PHY0DEVCKSTB, 10, 1000); - if (ret == 0) - return 0; + if (n == 0) { + ret = regmap_read_poll_timeout(p->sysreg, MA35_SYS_USBPMISCR, + val, + ((val & USBPMISCR_PHY_HOST_READY(0)) == + USBPMISCR_PHY_HOST_READY(0)) || + ((val & USBPMISCR_PHY_DEV_READY(0)) == + USBPMISCR_PHY_DEV_READY(0)), + 10, 1000); + } else { + ret = regmap_read_poll_timeout(p->sysreg, MA35_SYS_USBPMISCR, + val, + (val & USBPMISCR_PHY_HOST_READY(n)) == + USBPMISCR_PHY_HOST_READY(n), + 10, 1000); } - /* - * reset USB PHY0. - * wait until USB PHY0 60 MHz UTMI Interface Clock ready - */ - regmap_update_bits(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, 0x7, (PHY0POR | PHY0SUSPEND)); - udelay(20); - - /* make USB PHY0 enter operation mode */ - regmap_update_bits(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, 0x7, PHY0SUSPEND); - - /* make sure USB PHY 60 MHz UTMI Interface Clock ready */ - ret = regmap_read_poll_timeout(p_phy->sysreg, MA35_SYS_REG_USBPMISCR, val, - val & PHY0DEVCKSTB, 10, 1000); - if (ret == -ETIMEDOUT) { - dev_err(p_phy->dev, "Check PHY clock, Timeout: %d\n", ret); - clk_disable_unprepare(p_phy->clk); + if (ret) { + dev_err(p->dev, "USB PHY%u clock not stable (USBPMISCR=0x%08x)\n", + n, val); return ret; } return 0; } -static int ma35_usb_phy_power_off(struct phy *phy) +static const struct phy_ops ma35_usb_phy_ops = { + .init = ma35_usb_phy_init, + .owner = THIS_MODULE, +}; + +static int ma35_role_sw_set(struct usb_role_switch *sw, enum usb_role role) { - struct ma35_usb_phy *p_phy = phy_get_drvdata(phy); + return -EOPNOTSUPP; +} + +static enum usb_role ma35_role_sw_get(struct usb_role_switch *sw) +{ + struct ma35_usb_phy *p = usb_role_switch_get_drvdata(sw); + u32 val; + + regmap_read(p->sysreg, MA35_SYS_PWRONOTP, &val); + + return (val & PWRONOTP_USBP0ID) ? USB_ROLE_HOST : USB_ROLE_DEVICE; +} + +static int ma35_role_switch_init(struct platform_device *pdev, + struct ma35_usb_phy *p) +{ + struct usb_role_switch_desc sw_desc = {0}; + + sw_desc.set = ma35_role_sw_set; + sw_desc.get = ma35_role_sw_get; + sw_desc.allow_userspace_control = true; + sw_desc.driver_data = p; + sw_desc.fwnode = dev_fwnode(&pdev->dev); + + p->role_sw = usb_role_switch_register(&pdev->dev, &sw_desc); + if (IS_ERR(p->role_sw)) { + if (PTR_ERR(p->role_sw) == -ENODEV) { + p->role_sw = NULL; + return 0; + } + return dev_err_probe(&pdev->dev, PTR_ERR(p->role_sw), + "failed to register role switch\n"); + } - clk_disable_unprepare(p_phy->clk); return 0; } -static const struct phy_ops ma35_usb_phy_ops = { - .power_on = ma35_usb_phy_power_on, - .power_off = ma35_usb_phy_power_off, - .owner = THIS_MODULE, -}; +static void ma35_role_switch_exit(struct ma35_usb_phy *p) +{ + if (p->role_sw) { + usb_role_switch_unregister(p->role_sw); + p->role_sw = NULL; + } +} + +static struct phy *ma35_usb_phy_xlate(struct device *dev, + const struct of_phandle_args *args) +{ + struct ma35_usb_phy *p = dev_get_drvdata(dev); + unsigned int idx; + + if (args->args_count == 0) + idx = 0; + else + idx = args->args[0]; + + if (idx >= MA35_PHY_NUM) + return ERR_PTR(-EINVAL); + + return p->port[idx].phy; +} static int ma35_usb_phy_probe(struct platform_device *pdev) { struct phy_provider *provider; - struct ma35_usb_phy *p_phy; - struct phy *phy; + struct ma35_usb_phy *p; + struct clk *clk; + int n, ret; + u32 code; - p_phy = devm_kzalloc(&pdev->dev, sizeof(*p_phy), GFP_KERNEL); - if (!p_phy) + p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); + if (!p) return -ENOMEM; - p_phy->dev = &pdev->dev; - platform_set_drvdata(pdev, p_phy); + p->dev = &pdev->dev; + platform_set_drvdata(pdev, p); + + p->sysreg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "nuvoton,sys"); + if (IS_ERR(p->sysreg)) + return dev_err_probe(&pdev->dev, PTR_ERR(p->sysreg), + "failed to get SYS regmap\n"); - p_phy->sysreg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "nuvoton,sys"); - if (IS_ERR(p_phy->sysreg)) - return dev_err_probe(&pdev->dev, PTR_ERR(p_phy->sysreg), - "Failed to get SYS registers\n"); + clk = devm_clk_get_enabled(&pdev->dev, NULL); + if (IS_ERR(clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(clk), + "failed to get clock\n"); - p_phy->clk = of_clk_get(pdev->dev.of_node, 0); - if (IS_ERR(p_phy->clk)) - return dev_err_probe(&pdev->dev, PTR_ERR(p_phy->clk), - "failed to find usb_phy clock\n"); + for (n = 0; n < MA35_PHY_NUM; n++) { + if (of_property_read_u32_index(pdev->dev.of_node, + "nuvoton,rcalcode", n, &code)) + continue; - phy = devm_phy_create(&pdev->dev, NULL, &ma35_usb_phy_ops); - if (IS_ERR(phy)) - return dev_err_probe(&pdev->dev, PTR_ERR(phy), "Failed to create PHY\n"); + if (code > 15) + return dev_err_probe(&pdev->dev, -EINVAL, + "rcalcode[%d] %u out of range (0-15)\n", + n, code); - phy_set_drvdata(phy, p_phy); + regmap_update_bits(p->sysreg, MA35_SYS_USBPMISCR, + USBPMISCR_RCAL_MASK(n), + code << USBPMISCR_RCAL_SHIFT(n)); + } - provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); - if (IS_ERR(provider)) + regmap_update_bits(p->sysreg, MA35_SYS_MISCFCR0, MISCFCR0_UHOVRCURH, + of_property_read_bool(pdev->dev.of_node, + "nuvoton,oc-active-high") ? + MISCFCR0_UHOVRCURH : 0); + + for (n = 0; n < MA35_PHY_NUM; n++) { + p->port[n].idx = n; + + p->port[n].phy = devm_phy_create(&pdev->dev, pdev->dev.of_node, + &ma35_usb_phy_ops); + if (IS_ERR(p->port[n].phy)) + return dev_err_probe(&pdev->dev, PTR_ERR(p->port[n].phy), + "failed to create PHY%d\n", n); + + phy_set_drvdata(p->port[n].phy, &p->port[n]); + } + + ret = ma35_role_switch_init(pdev, p); + if (ret) + return ret; + + provider = devm_of_phy_provider_register(&pdev->dev, ma35_usb_phy_xlate); + if (IS_ERR(provider)) { + ma35_role_switch_exit(p); return dev_err_probe(&pdev->dev, PTR_ERR(provider), - "Failed to register PHY provider\n"); + "failed to register PHY provider\n"); + } + return 0; } +static void ma35_usb_phy_remove(struct platform_device *pdev) +{ + struct ma35_usb_phy *p = platform_get_drvdata(pdev); + + ma35_role_switch_exit(p); +} + static const struct of_device_id ma35_usb_phy_of_match[] = { - { .compatible = "nuvoton,ma35d1-usb2-phy", }, - { }, + { .compatible = "nuvoton,ma35d1-usb2-phy" }, + { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, ma35_usb_phy_of_match); static struct platform_driver ma35_usb_phy_driver = { .probe = ma35_usb_phy_probe, - .driver = { - .name = "ma35d1-usb2-phy", - .of_match_table = ma35_usb_phy_of_match, + .remove = ma35_usb_phy_remove, + .driver = { + .name = "ma35d1-usb2-phy", + .of_match_table = ma35_usb_phy_of_match, }, }; module_platform_driver(ma35_usb_phy_driver); MODULE_DESCRIPTION("Nuvoton ma35d1 USB2.0 PHY driver"); MODULE_AUTHOR("Hui-Ping Chen "); +MODULE_AUTHOR("Joey Lu "); MODULE_LICENSE("GPL"); -- 2.43.0