[PATCH v2 3/4] media: i2c: vd55g1: Return the endpoint parser's error code

[Ruslan Koreev <koreev.r@gmail.com>]

Pass the endpoint to v4l2_fwnode_endpoint_alloc_parse() without checking
it first and return the parser's error code instead of -EINVAL. The
parser returns -EPROBE_DEFER for a missing endpoint, which is what a
sensor on an ACPI system needs: there the endpoint is a software node
that the IPU bridge attaches when the IPU driver probes, possibly after
this driver. On OF systems a missing endpoint now defers the probe as
well instead of failing it, as in other sensor drivers that leave this
check to the parser.

Signed-off-by: Ruslan Koreev <koreev.r@gmail.com>
---
 drivers/media/i2c/vd55g1.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/media/i2c/vd55g1.c b/drivers/media/i2c/vd55g1.c
index 22b1497e8..8043eaa50 100644
--- a/drivers/media/i2c/vd55g1.c
+++ b/drivers/media/i2c/vd55g1.c
@@ -1801,7 +1801,7 @@ static int vd55g1_check_csi_conf(struct vd55g1 *sensor,
 
 	ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &ep);
 	if (ret)
-		return -EINVAL;
+		return ret;
 
 	/* Check lanes number */
 	n_lanes = ep.bus.mipi_csi2.num_data_lanes;
@@ -1905,11 +1905,6 @@ static int vd55g1_parse_dt(struct vd55g1 *sensor)
 
 	endpoint = fwnode_graph_get_endpoint_by_id(dev_fwnode(sensor->dev),
 						   0, 0, 0);
-	if (!endpoint) {
-		dev_err(sensor->dev, "Endpoint node not found\n");
-		return -EINVAL;
-	}
-
 	ret = vd55g1_check_csi_conf(sensor, endpoint);
 	fwnode_handle_put(endpoint);
 	if (ret)
-- 
2.55.0