From: Eric Biggers <ebiggers@kernel.org>
To: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Ard Biesheuvel <ardb@kernel.org>,
"Jason A . Donenfeld" <Jason@zx2c4.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
Stian Halseth <stian@itx.no>,
sparclinux@vger.kernel.org, Eric Biggers <ebiggers@kernel.org>
Subject: [PATCH v3] crypto: aes - Fix undesired override of some optimized AES modes
Date: Tue, 29 Sep 2026 15:27:52 -0700 [thread overview]
Message-ID: <20260929222752.36427-1-ebiggers@kernel.org> (raw)
The new library APIs for AES encryption modes were wired up to the
traditional crypto API via crypto/aes.c. However, for now the kernel is
still in a transitional state where various architectures still have
architecture-optimized implementations of AES modes in arch/*/crypto/,
wired up to the traditional crypto API only. Because of that, the
crypto/aes.c algorithms were given a cra_priority of only 110 to prevent
them from overriding arch/*/crypto/ in the traditional crypto API.
However, because of how the traditional crypto API works, the
cra_priority trick doesn't work in cases where the relevant algorithm
isn't directly implemented by arch/*/crypto/ but rather is provided by a
template instance using other code in arch/*/crypto/.
For example, x86 doesn't have its own "ccm(aes)" but rather relies on
the "ccm" template constructing it from the x86-optimized "ctr(aes)".
The existence of the library-based "ccm(aes)" prevents that, even though
its priority is lower than what the template would produce.
Thus, "ccm(aes)" ends up using the slower single-block AES code.
Therefore, skip wiring up the relevant library-based code to the
traditional crypto API on architectures where this problem can occur, as
determined by what exists in arch/*/crypto/ for each architecture.
This is ugly, but it's also temporary: these conditions will go away as
architecture-optimized implementations of AES modes are migrated into
the library. But until then, we need to prevent performance regressions
by ensuring that the optimized code continues to be used.
Fixes: 20df21a482aa ("crypto: aes - Add CBC and CBC-CTS support using library")
Fixes: 8ca62072faa1 ("crypto: aes - Add GCM support using library")
Fixes: f70ad727d1d6 ("crypto: aes - Add CCM support using library")
Fixes: 94efa0c9fb36 ("crypto: aes - Add XTS support using library")
Closes: https://github.com/sparclinux/issues/issues/106
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
---
This patch is intended to taken through libcrypto-fixes
v3: Also suppress xts(aes) on SPARC, and improved comments
v2: Fixed PowerPC config option, and resent as standalone patch
crypto/aes.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 47 insertions(+), 4 deletions(-)
diff --git a/crypto/aes.c b/crypto/aes.c
index 94791f481e98..51eee78396ea 100644
--- a/crypto/aes.c
+++ b/crypto/aes.c
@@ -637,7 +637,18 @@ static struct skcipher_alg skcipher_algs[] = {
.decrypt = crypto_aes_cbc_decrypt,
},
#endif
-#if IS_ENABLED(CONFIG_CRYPTO_CTS)
+ /*
+ * Don't register library-based "cts(cbc(aes))" on architectures where
+ * it might block a "better" implementation from being instantiated via
+ * the "cts" template. These exclusions are temporary and will go away
+ * as the arch-optimized AES code is migrated into the library.
+ */
+#if IS_ENABLED(CONFIG_CRYPTO_CTS) && \
+ !(IS_ENABLED(CONFIG_ARM) || \
+ IS_ENABLED(CONFIG_ARM64) || \
+ IS_ENABLED(CONFIG_PPC) || \
+ IS_ENABLED(CONFIG_S390) || \
+ IS_ENABLED(CONFIG_SPARC))
{
.base.cra_name = "cts(cbc(aes))",
.base.cra_driver_name = "cts-cbc-aes-lib",
@@ -687,7 +698,13 @@ static struct skcipher_alg skcipher_algs[] = {
.decrypt = crypto_aes_xctr_crypt,
},
#endif
-#if IS_ENABLED(CONFIG_CRYPTO_XTS)
+ /*
+ * Don't register library-based "xts(aes)" on architectures where it
+ * might block a "better" implementation from being instantiated via the
+ * "xts" template. This exclusion is temporary and will go away when
+ * the library AES-XTS is optimized for SPARC.
+ */
+#if IS_ENABLED(CONFIG_CRYPTO_XTS) && !IS_ENABLED(CONFIG_SPARC)
{
.base.cra_name = "xts(aes)",
.base.cra_driver_name = "xts-aes-lib",
@@ -980,7 +997,20 @@ static __maybe_unused int crypto_aes_ccm_decrypt(struct aead_request *req)
}
static struct aead_alg aead_algs[] = {
-#if IS_ENABLED(CONFIG_CRYPTO_GCM)
+ /*
+ * Don't register library-based "gcm(aes)" and "rfc4106(gcm(aes))" on
+ * architectures where they might block a "better" implementation from
+ * being instantiated via the "gcm" and "rfc4106" templates. These
+ * exclusions are temporary and will go away as the arch-optimized AES
+ * code is migrated into the library.
+ */
+#if IS_ENABLED(CONFIG_CRYPTO_GCM) && \
+ !(IS_ENABLED(CONFIG_ARM) || \
+ IS_ENABLED(CONFIG_ARM64) || \
+ IS_ENABLED(CONFIG_PPC) || \
+ IS_ENABLED(CONFIG_RISCV) || \
+ IS_ENABLED(CONFIG_S390) || \
+ IS_ENABLED(CONFIG_SPARC))
{
.base.cra_name = "gcm(aes)",
.base.cra_driver_name = "gcm-aes-lib",
@@ -1012,7 +1042,20 @@ static struct aead_alg aead_algs[] = {
.chunksize = AES_BLOCK_SIZE,
},
#endif /* CONFIG_CRYPTO_GCM */
-#if IS_ENABLED(CONFIG_CRYPTO_CCM)
+ /*
+ * Don't register library-based "ccm(aes)" on architectures where it
+ * might block a "better" implementation from being instantiated via the
+ * "ccm" template. These exclusions are temporary and will go away as
+ * the arch-optimized AES code is migrated into the library.
+ */
+#if IS_ENABLED(CONFIG_CRYPTO_CCM) && \
+ !(IS_ENABLED(CONFIG_ARM) || \
+ IS_ENABLED(CONFIG_ARM64) || \
+ IS_ENABLED(CONFIG_PPC) || \
+ IS_ENABLED(CONFIG_RISCV) || \
+ IS_ENABLED(CONFIG_S390) || \
+ IS_ENABLED(CONFIG_SPARC) || \
+ IS_ENABLED(CONFIG_X86))
{
.base.cra_name = "ccm(aes)",
.base.cra_driver_name = "ccm-aes-lib",
base-commit: 93f51579e7df248780214094418f205253383cc5
--
2.55.0
next reply other threads:[~2026-09-29 22:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-29 22:27 Eric Biggers [this message]
2026-09-30 5:50 ` Ard Biesheuvel
2026-09-30 7:32 ` Stian Halseth
2026-09-30 7:41 ` John Paul Adrian Glaubitz
2026-09-30 9:15 ` Stian Halseth
2026-09-30 9:27 ` John Paul Adrian Glaubitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260929222752.36427-1-ebiggers@kernel.org \
--to=ebiggers@kernel.org \
--cc=Jason@zx2c4.com \
--cc=ardb@kernel.org \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sparclinux@vger.kernel.org \
--cc=stian@itx.no \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®