From: Josua Mayer <josua@solid-run.com>
To: "Ioana Ciornei" <ioana.ciornei@nxp.com>,
"Christophe Leroy (CS GROUP)" <chleroy@kernel.org>,
"Andrew Lunn" <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Horia Geantă" <horia.geanta@nxp.com>,
"Pankaj Gupta" <pankaj.gupta@nxp.com>,
"Gaurav Jain" <gaurav.jain@nxp.com>,
"Herbert Xu" <herbert@gondor.apana.org.au>
Cc: Yazan Shhady <yazan.shhady@solid-run.com>,
Jon Nettleton <jon@solid-run.com>,
linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
linux-crypto@vger.kernel.org, Josua Mayer <josua@solid-run.com>
Subject: [PATCH RFC net-next 1/3] dpaa2-eth: skip isolated CPUs when allocating channels
Date: Wed, 30 Sep 2026 18:54:58 +0200 [thread overview]
Message-ID: <20260930-dpaa2-isolcpus-v1-1-66c13f4fd75b@solid-run.com> (raw)
In-Reply-To: <20260930-dpaa2-isolcpus-v1-0-66c13f4fd75b@solid-run.com>
The driver allocates one channel per online CPU and registers it with
that CPU's affine DPIO.
When isolcpus=managed_irq is used to reserve CPUs for latency-sensitive
applications, those CPUs are expected to be free of routine device
interrupts.
The DPIO driver assigns affine CPUs only from the HK_TYPE_MANAGED_IRQ
housekeeping mask, leaving isolated CPUs without an affine DPIO. This
defers dpaa2-eth probe indefinitely once channel setup reaches an
isolated CPU.
Restrict channel setup to the online CPUs in the HK_TYPE_MANAGED_IRQ
housekeeping mask, so that isolated CPUs are skipped and don't defer
probe.
Signed-off-by: Josua Mayer <josua@solid-run.com>
---
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
index 6f1046c9cc515..850834388790a 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -15,6 +15,7 @@
#include <linux/bpf_trace.h>
#include <linux/fsl/ptp_qoriq.h>
#include <linux/ptp_classify.h>
+#include <linux/sched/isolation.h>
#include <net/pkt_cls.h>
#include <net/sock.h>
#include <net/tso.h>
@@ -3173,6 +3174,7 @@ static int dpaa2_eth_setup_dpio(struct dpaa2_eth_priv *priv)
struct dpaa2_eth_channel *channel;
struct dpcon_notification_cfg dpcon_notif_cfg;
struct device *dev = priv->net_dev->dev.parent;
+ const struct cpumask *hk_mask = housekeeping_cpumask(HK_TYPE_MANAGED_IRQ);
int i, err;
/* We want the ability to spread ingress traffic (RX, TX conf) to as
@@ -3182,10 +3184,11 @@ static int dpaa2_eth_setup_dpio(struct dpaa2_eth_priv *priv)
* Allocate one channel per core and register it to the core's
* affine DPIO. If not enough channels are available for all cores
* or if some cores don't have an affine DPIO, there will be no
- * ingress frame processing on those cores.
+ * ingress frame processing on those cores. Isolated cores
+ * (isolcpus=managed_irq) have no affine DPIO.
*/
cpumask_clear(&priv->dpio_cpumask);
- for_each_online_cpu(i) {
+ for_each_cpu_and(i, cpu_online_mask, hk_mask) {
/* Try to allocate a channel */
channel = dpaa2_eth_alloc_channel(priv);
if (IS_ERR_OR_NULL(channel)) {
@@ -3245,6 +3248,9 @@ static int dpaa2_eth_setup_dpio(struct dpaa2_eth_priv *priv)
break;
}
+ if (cpumask_empty(&priv->dpio_cpumask))
+ goto err_alloc_ch;
+
return 0;
err_set_cdan:
--
2.51.0
next prev parent reply other threads:[~2026-09-30 16:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-30 16:54 [PATCH RFC net-next 0/3] dpaa2: avoid scheduling dpio interrupts on isolated CPUs Josua Mayer
2026-09-30 16:54 ` Josua Mayer [this message]
2026-09-30 16:54 ` [PATCH RFC net-next 2/3] crypto: caam/qi2 - skip isolated CPUs when setting up queue pairs Josua Mayer
2026-09-30 16:55 ` [PATCH RFC net-next 3/3] soc: fsl: dpio: skip isolated CPUs when assigning portals Josua Mayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260930-dpaa2-isolcpus-v1-1-66c13f4fd75b@solid-run.com \
--to=josua@solid-run.com \
--cc=andrew+netdev@lunn.ch \
--cc=chleroy@kernel.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gaurav.jain@nxp.com \
--cc=herbert@gondor.apana.org.au \
--cc=horia.geanta@nxp.com \
--cc=ioana.ciornei@nxp.com \
--cc=jon@solid-run.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=pankaj.gupta@nxp.com \
--cc=yazan.shhady@solid-run.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®