[PATCH v1 1/3] dt-bindings: mfd: Document Skyworks AAT2870

[Svyatoslav Ryhel <clamor95@gmail.com>]

Document Skyworks AAT2870 LED Backlight Driver and Multiple LDO Lighting
Management Unit.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 .../bindings/leds/skyworks,aat2870.yaml       | 127 ++++++++++++++++++
 1 file changed, 127 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/skyworks,aat2870.yaml

diff --git a/Documentation/devicetree/bindings/leds/skyworks,aat2870.yaml b/Documentation/devicetree/bindings/leds/skyworks,aat2870.yaml
new file mode 100644
index 0000000000000..6dfcd1fa399ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/skyworks,aat2870.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/skyworks,aat2870.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AAT2870 LED Backlight Driver and Multiple LDO Lighting Management Unit
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+properties:
+  compatible:
+    const: skyworks,aat2870
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO connected to EN pin.
+    maxItems: 1
+
+  vin-supply:
+    description: Regulator providing power to the "IN" pin.
+
+  backlight:
+    $ref: /schemas/leds/backlight/common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        const: skyworks,aat2870-backlight
+
+      led-max-microamp:
+        minimum: 450000
+        maximum: 27900000
+        default: 450000
+
+      max-brightness:
+        default: 255
+
+      skyworks,channels:
+        description: layout of active channels, where each bit represents
+          one of 8 channels.
+        $ref: /schemas/types.yaml#/definitions/uint8
+        default: 0xff
+
+    required:
+      - compatible
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: skyworks,aat2870-regulator
+
+      in-ldo-supply:
+        description: Phandle to parent supply of regulators populated under
+          regulators node. They all share same parent.
+
+    patternProperties:
+      "^(ldo-(a|b|c|d))$":
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@60 {
+            compatible = "skyworks,aat2870";
+            reg = <0x60>;
+
+            enable-gpios = <&gpio 139 GPIO_ACTIVE_HIGH>;
+            vin-supply = <&vdd_3v3_vbat>;
+
+            backlight {
+                compatible = "skyworks,aat2870-backlight";
+
+                skyworks,channels = /bits/ 8 <0xff>;
+                led-max-microamp = <27900000>;
+            };
+
+            regulators {
+                compatible = "skyworks,aat2870-regulator";
+
+                in-ldo-supply = <&vdd_3v3_vbat>;
+
+                ldo-a {
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <1200000>;
+                };
+
+                ldo-b {
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+
+                ldo-c {
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+
+                ldo-d {
+                    regulator-min-microvolt = <2700000>;
+                    regulator-max-microvolt = <2800000>;
+                };
+            };
+        };
+    };
-- 
2.53.0