[PATCH] i2c: qcom-geni: release runtime PM reference when set_rate fails

[Rahul Pon <theflyingrahul@gmail.com>]

geni_i2c_xfer() takes a runtime-PM reference with pm_runtime_get_sync()
and then returns directly if the set_rate() callback fails, leaking the
reference and keeping the controller resumed for good. Route that error
through the existing cleanup path, which drops the reference and resets
the transfer state.

Found by code review; compile-tested with arm64 defconfig plus ACPI and
W=1.

Fixes: 10e74f4c5046 ("i2c: qcom-geni: Enable I2C on SA8255p Qualcomm platforms")
Assisted-by: LLM
Signed-off-by: Rahul Pon <theflyingrahul@gmail.com>
---
 drivers/i2c/busses/i2c-qcom-geni.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 6a39e21d5e..ed6495ef81 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -1003,13 +1003,14 @@ static int geni_i2c_xfer(struct i2c_adapter *adap,
 
 	ret = gi2c->dev_data->set_rate(&gi2c->se, gi2c->clk_freq_out);
 	if (ret)
-		return ret;
+		goto out_pm;
 
 	if (gi2c->gpi_mode)
 		ret = geni_i2c_gpi_xfer(gi2c, msgs, num);
 	else
 		ret = geni_i2c_fifo_xfer(gi2c, msgs, num);
 
+out_pm:
 	pm_runtime_put_autosuspend(gi2c->se.dev);
 	gi2c->cur = NULL;
 	gi2c->err = 0;

base-commit: 551c722f40809618230001baccf219193e22fc5a
-- 
2.53.0