From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-pz2-f41.google.com (mail-pz2-f41.google.com [74.125.228.41]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 492924BF947 for ; Wed, 30 Sep 2026 11:19:04 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=74.125.228.41 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1790767146; cv=none; b=HaMF2zAEOcYJHv5nwo5L18n0sy2s6aN+p6X0DmpABqjzikJfRIV2N9voqYqheuFEylf4qwlf1/FE7ySd1/QwJxvvYJokpru8xJ96IA3Y8L+mpJ/aaDpvASs04E8JE8xGNZNy1F/xQaDiIAGbSF9hSVEFy4cZpqr5a54VF7+byFU= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1790767146; c=relaxed/simple; bh=0u6v79Krh5wgu6ieg82TJioz7VCyU2eQjOin5lWXN1s=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=HfW9gLXvjYEgXrCOWu6dvNy1v43eTvZQkUur50GMtgr02EDlEuQXA7IEj9j+ekWvjoFLmKq+8tw/G0IjtFL6Dxv7YFXcmTLXBA+EPkmipS373KPvf4a61e+kTyCj2E4ET1phEXeRR/EPCM5nAF0hV5wec/JkvcErFm9S0Qf0/Xc= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=N+zrEM42; arc=none smtp.client-ip=74.125.228.41 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="N+zrEM42" Received: by mail-pz2-f41.google.com with SMTP id d2e1a72fcca58-8686f46e4adso3342941b3a.0 for ; Wed, 30 Sep 2026 04:19:04 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1790767144; x=1791371944; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to:content-type; bh=rCnLVLhWtVLLmpN3x9fjuaEAEUhiKYtsxACEAQQZJ0o=; b=N+zrEM42NdDwzKyYBSeBTVVsrHljzwH3GsovrRL7gA4w0U1F/ocwM6X0dG8wtv0mC1 J0Rd1NvvIy4tItEX6hGuXOpRrzegfMNIoHyvqN+RZtiSQJJg4Vc25JHTqykVXBKAQNFo FJR0pGbme2BYD7yMA0F8kpxXc8sPT2kBGc0TMRHs8IDQk5M+DLfCSGVkVuP4D9b9EKCJ jecYK6jL1pmgezeXwMQNXxb7Ut1AGJJ9HHP2zeWhFO0Uxv1hpJWlDMpD3TNPh9UYixaT oLP6eRr8RfMS/c4qwuaCKjWxz93IamQz7zH03004UBbgW+37LCFAj7s5jQqWO3lz+HNS FOAg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20260707; t=1790767144; x=1791371944; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-gg:x-gm-message-state:from :to:cc:subject:date:message-id:reply-to:content-type; bh=rCnLVLhWtVLLmpN3x9fjuaEAEUhiKYtsxACEAQQZJ0o=; b=JsxQd85E8YFOcIWB0h0cMybhlsaeO9eOSCDZNzIUZGjcZ2Rumq5cCcuCDJ4xT6MQEn kao/I6dWsoF1DI0m4srbfDWh92b1qX4hoaOS+ZwWFC7NcwiK7Ak73uSK4QtQFMwMqkHy 5ZuRmJ2vOxlTZG2DwEHWES3LZDpTpm1NzskAOAwi1IjI/7t8A92Js1T/Hwnvip/HTm0O ugToCPgz9ZhHbIp1/eV5Yf/52TGI2yt2vFrd9BDNf+G33D6ljbUHGERpgSK1b9ApX1A3 aJF8Vq3Q3oLV60QBTGhE7QJoooVSwTlNLLwfwUPSBqrfkxANI22fVIN6rSqWnTOFhbqn 2cKA== X-Forwarded-Encrypted: i=1; AKwUvBzCVaub8a0laZe7N4kn6x47zWGVb2ke30Bq9a76UAingQpd4c/vX0GaAycjGD+p6hBOCgbVFQzRPNKhW5A=@vger.kernel.org X-Gm-Message-State: AFuF++l5QZzCERGRZX5vLKw5DdoLoz3rZqPjM4dyqkJ3gh/zMlLUNxOp BRHYPNDvooJKtm5H8brX9BUXl+TVUPRFtMX1X/U9d4h6UlRsL9LWQ1Ed X-Gm-Gg: AYBFou0Yk31ZFC0cPLC3jgLOmrworD3zXg6rJDdxXIrPEfDgkamWOnHqDE90r/2sw90 usIG6fFSsLELwK2DAKFe4C4uHpn06N7jnRDB/7fZmQHhDQd3w/Owt52iSj69nOZ6sQv0ibZe9GC 6Cr2Lo1+VR3q1+APbihiHbsq2nhUWgi0Hn3c+QhBEumKCUoEpA/yfIEUzYI11wsE65/vKip/EJX iEmJBUVYdmcW6UhI4trGziu+3z+v/coTlcvLnz5BYpMBhXyM1uHwJZii6n6wkYI+5ZW27LvEwOP J2mmYRKG134KkMrzonUhKvpe5Pz0+NwpYVY/GoC0Ot3JNNGJJn+K0+6bRcixQygsyHvd8paHF3Y hFkNpLjODBHiA3KQWDDkFB4wFCAt0wc35a/CILWxVv/MGk9CRLM8SSEBsNv2S/+n0BeAZ29N+QF O9q1jdYojsd641je/Hsd0OWig/ff2yx3Z1zIYKIO9YisGZ6u+voicvMznSHNfKhg2WAhZfOspvB dZMGPF0OdfIM0LaTgwACQ7QzjHGaKdgGi1wypJBNqACXHNYIi+1Mmw= X-Received: by 2002:a05:6a00:4390:b0:880:fe7b:bc56 with SMTP id d2e1a72fcca58-8874e53ec84mr760256b3a.50.1790767143558; Wed, 30 Sep 2026 04:19:03 -0700 (PDT) Received: from cosmo-ubuntu-2404.. (61-220-246-151.hinet-ip.hinet.net. [61.220.246.151]) by smtp.gmail.com with ESMTPSA id d2e1a72fcca58-887253992a9sm650257b3a.17.2026.09.30.04.19.01 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 30 Sep 2026 04:19:03 -0700 (PDT) From: Cosmo Chou To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, joel@jms.id.au, andrew@codeconstruct.com.au Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org, cosmo.chou@quantatw.com, Cosmo Chou Subject: [PATCH v3 1/4] ARM: dts: aspeed: bletchley: Sort i2c device nodes by address Date: Wed, 30 Sep 2026 19:18:10 +0800 Message-ID: <20260930111813.52396-2-chou.cosmo@gmail.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20260930111813.52396-1-chou.cosmo@gmail.com> References: <20260930111813.52396-1-chou.cosmo@gmail.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Reorder child nodes in i2c0-i2c6 to follow ascending unit address ordering as required by scripts/dtc/dt-check-style. No functional changes. Signed-off-by: Cosmo Chou --- .../aspeed/aspeed-bmc-facebook-bletchley.dts | 430 +++++++++--------- 1 file changed, 218 insertions(+), 212 deletions(-) diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts index d1a04b63df9e..b022bdd02c1e 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts @@ -343,10 +343,25 @@ flash@0 { &i2c0 { status = "okay"; - ina230@45 { - compatible = "ti,ina230"; - reg = <0x45>; - shunt-resistor = <2000>; + + sled1_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + interrupt-parent = <&gpio0>; + interrupts = ; + vbus-supply = <&vbus_sled1>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>; + power-role = "dual"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + }; }; mp5023@40 { @@ -354,11 +369,6 @@ mp5023@40 { reg = <0x40>; }; - tmp421@4f { - compatible = "ti,tmp421"; - reg = <0x4f>; - }; - sled1_ioexp41: pca9536@41 { compatible = "nxp,pca9536"; reg = <0x41>; @@ -370,20 +380,20 @@ sled1_ioexp41: pca9536@41 { "SLED1_CLKREQ_N", "SLED1_PCIE_PWR_EN"; }; - sled1_ioexp: pca9539@76 { - compatible = "nxp,pca9539"; - reg = <0x76>; - gpio-controller; - #gpio-cells = <2>; + ina230@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; - interrupt-parent = <&gpio0>; - interrupts = ; + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; - gpio-line-names = - "SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT", - "SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT", - "SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY", - "SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1"; + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; }; sled1_leds: pca9552@67 { @@ -401,13 +411,33 @@ sled1_leds: pca9552@67 { "","","",""; }; - sled1_fusb302: typec-portc@22 { + sled1_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&gpio0>; + interrupts = ; + + gpio-line-names = + "SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT", + "SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT", + "SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY", + "SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1"; + }; +}; + +&i2c1 { + status = "okay"; + + sled2_fusb302: typec-portc@22 { compatible = "fcs,fusb302"; reg = <0x22>; interrupt-parent = <&gpio0>; - interrupts = ; - vbus-supply = <&vbus_sled1>; + interrupts = ; + vbus-supply = <&vbus_sled2>; connector { compatible = "usb-c-connector"; @@ -421,39 +451,51 @@ connector { }; }; - eeprom@54 { - compatible = "atmel,24c64"; - reg = <0x54>; + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + sled2_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED2_SWD_MUX", "SLED2_XRES_SWD_N", + "SLED2_CLKREQ_N", "SLED2_PCIE_PWR_EN"; }; -}; -&i2c1 { - status = "okay"; ina230@45 { compatible = "ti,ina230"; reg = <0x45>; shunt-resistor = <2000>; }; - mp5023@40 { - compatible = "mps,mp5023"; - reg = <0x40>; - }; - tmp421@4f { compatible = "ti,tmp421"; reg = <0x4f>; }; - sled2_ioexp41: pca9536@41 { - compatible = "nxp,pca9536"; - reg = <0x41>; + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + + sled2_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; gpio-controller; #gpio-cells = <2>; gpio-line-names = - "SLED2_SWD_MUX", "SLED2_XRES_SWD_N", - "SLED2_CLKREQ_N", "SLED2_PCIE_PWR_EN"; + "led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM", + "","","","", + "","","","", + "","","",""; }; sled2_ioexp: pca9539@76 { @@ -471,29 +513,18 @@ sled2_ioexp: pca9539@76 { "SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY", "SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2"; }; +}; - sled2_leds: pca9552@67 { - compatible = "nxp,pca9552"; - reg = <0x67>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM", - "","","","", - "","","","", - "","","",""; - }; +&i2c2 { + status = "okay"; - sled2_fusb302: typec-portc@22 { + sled3_fusb302: typec-portc@22 { compatible = "fcs,fusb302"; reg = <0x22>; interrupt-parent = <&gpio0>; - interrupts = ; - vbus-supply = <&vbus_sled2>; + interrupts = ; + vbus-supply = <&vbus_sled3>; connector { compatible = "usb-c-connector"; @@ -507,39 +538,51 @@ connector { }; }; - eeprom@54 { - compatible = "atmel,24c64"; - reg = <0x54>; + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + sled3_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED3_SWD_MUX", "SLED3_XRES_SWD_N", + "SLED3_CLKREQ_N", "SLED3_PCIE_PWR_EN"; }; -}; -&i2c2 { - status = "okay"; ina230@45 { compatible = "ti,ina230"; reg = <0x45>; shunt-resistor = <2000>; }; - mp5023@40 { - compatible = "mps,mp5023"; - reg = <0x40>; - }; - tmp421@4f { compatible = "ti,tmp421"; reg = <0x4f>; }; - sled3_ioexp41: pca9536@41 { - compatible = "nxp,pca9536"; - reg = <0x41>; + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + + sled3_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; gpio-controller; #gpio-cells = <2>; gpio-line-names = - "SLED3_SWD_MUX", "SLED3_XRES_SWD_N", - "SLED3_CLKREQ_N", "SLED3_PCIE_PWR_EN"; + "led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM", + "","","","", + "","","","", + "","","",""; }; sled3_ioexp: pca9539@76 { @@ -557,29 +600,18 @@ sled3_ioexp: pca9539@76 { "SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY", "SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3"; }; +}; - sled3_leds: pca9552@67 { - compatible = "nxp,pca9552"; - reg = <0x67>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM", - "","","","", - "","","","", - "","","",""; - }; +&i2c3 { + status = "okay"; - sled3_fusb302: typec-portc@22 { + sled4_fusb302: typec-portc@22 { compatible = "fcs,fusb302"; reg = <0x22>; interrupt-parent = <&gpio0>; - interrupts = ; - vbus-supply = <&vbus_sled3>; + interrupts = ; + vbus-supply = <&vbus_sled4>; connector { compatible = "usb-c-connector"; @@ -593,39 +625,51 @@ connector { }; }; - eeprom@54 { - compatible = "atmel,24c64"; - reg = <0x54>; + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + sled4_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED4_SWD_MUX", "SLED4_XRES_SWD_N", + "SLED4_CLKREQ_N", "SLED4_PCIE_PWR_EN"; }; -}; -&i2c3 { - status = "okay"; ina230@45 { compatible = "ti,ina230"; reg = <0x45>; shunt-resistor = <2000>; }; - mp5023@40 { - compatible = "mps,mp5023"; - reg = <0x40>; - }; - tmp421@4f { compatible = "ti,tmp421"; reg = <0x4f>; }; - sled4_ioexp41: pca9536@41 { - compatible = "nxp,pca9536"; - reg = <0x41>; + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + + sled4_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; gpio-controller; #gpio-cells = <2>; gpio-line-names = - "SLED4_SWD_MUX", "SLED4_XRES_SWD_N", - "SLED4_CLKREQ_N", "SLED4_PCIE_PWR_EN"; + "led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM", + "","","","", + "","","","", + "","","",""; }; sled4_ioexp: pca9539@76 { @@ -643,29 +687,18 @@ sled4_ioexp: pca9539@76 { "SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY", "SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4"; }; +}; - sled4_leds: pca9552@67 { - compatible = "nxp,pca9552"; - reg = <0x67>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM", - "","","","", - "","","","", - "","","",""; - }; +&i2c4 { + status = "okay"; - sled4_fusb302: typec-portc@22 { + sled5_fusb302: typec-portc@22 { compatible = "fcs,fusb302"; reg = <0x22>; interrupt-parent = <&gpio0>; - interrupts = ; - vbus-supply = <&vbus_sled4>; + interrupts = ; + vbus-supply = <&vbus_sled5>; connector { compatible = "usb-c-connector"; @@ -679,39 +712,51 @@ connector { }; }; - eeprom@54 { - compatible = "atmel,24c64"; - reg = <0x54>; + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + sled5_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED5_SWD_MUX", "SLED5_XRES_SWD_N", + "SLED5_CLKREQ_N", "SLED5_PCIE_PWR_EN"; }; -}; -&i2c4 { - status = "okay"; ina230@45 { compatible = "ti,ina230"; reg = <0x45>; shunt-resistor = <2000>; }; - mp5023@40 { - compatible = "mps,mp5023"; - reg = <0x40>; - }; - tmp421@4f { compatible = "ti,tmp421"; reg = <0x4f>; }; - sled5_ioexp41: pca9536@41 { - compatible = "nxp,pca9536"; - reg = <0x41>; + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + + sled5_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; gpio-controller; #gpio-cells = <2>; gpio-line-names = - "SLED5_SWD_MUX", "SLED5_XRES_SWD_N", - "SLED5_CLKREQ_N", "SLED5_PCIE_PWR_EN"; + "led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM", + "","","","", + "","","","", + "","","",""; }; sled5_ioexp: pca9539@76 { @@ -729,29 +774,18 @@ sled5_ioexp: pca9539@76 { "SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY", "SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5"; }; +}; - sled5_leds: pca9552@67 { - compatible = "nxp,pca9552"; - reg = <0x67>; - #address-cells = <1>; - #size-cells = <0>; - gpio-controller; - #gpio-cells = <2>; - - gpio-line-names = - "led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM", - "","","","", - "","","","", - "","","",""; - }; +&i2c5 { + status = "okay"; - sled5_fusb302: typec-portc@22 { + sled6_fusb302: typec-portc@22 { compatible = "fcs,fusb302"; reg = <0x22>; interrupt-parent = <&gpio0>; - interrupts = ; - vbus-supply = <&vbus_sled5>; + interrupts = ; + vbus-supply = <&vbus_sled6>; connector { compatible = "usb-c-connector"; @@ -765,30 +799,11 @@ connector { }; }; - eeprom@54 { - compatible = "atmel,24c64"; - reg = <0x54>; - }; -}; - -&i2c5 { - status = "okay"; - ina230@45 { - compatible = "ti,ina230"; - reg = <0x45>; - shunt-resistor = <2000>; - }; - mp5023@40 { compatible = "mps,mp5023"; reg = <0x40>; }; - tmp421@4f { - compatible = "ti,tmp421"; - reg = <0x4f>; - }; - sled6_ioexp41: pca9536@41 { compatible = "nxp,pca9536"; reg = <0x41>; @@ -800,20 +815,20 @@ sled6_ioexp41: pca9536@41 { "SLED6_CLKREQ_N", "SLED6_PCIE_PWR_EN"; }; - sled6_ioexp: pca9539@76 { - compatible = "nxp,pca9539"; - reg = <0x76>; - gpio-controller; - #gpio-cells = <2>; + ina230@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; - interrupt-parent = <&gpio0>; - interrupts = ; + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; - gpio-line-names = - "SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT", - "SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT", - "SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY", - "SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6"; + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; }; sled6_leds: pca9552@67 { @@ -831,45 +846,36 @@ sled6_leds: pca9552@67 { "","","",""; }; - sled6_fusb302: typec-portc@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; + sled6_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + gpio-controller; + #gpio-cells = <2>; interrupt-parent = <&gpio0>; - interrupts = ; - vbus-supply = <&vbus_sled6>; - - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>; - power-role = "dual"; - data-role = "dual"; - source-pdos = ; - sink-pdos = ; - op-sink-microwatt = <10000000>; - }; - }; + interrupts = ; - eeprom@54 { - compatible = "atmel,24c64"; - reg = <0x54>; + gpio-line-names = + "SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT", + "SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT", + "SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY", + "SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6"; }; }; &i2c6 { status = "okay"; - eeprom@56 { - compatible = "atmel,24c64"; - reg = <0x56>; - }; - rtc@51 { /* in-chip rtc disabled, use external rtc (battery-backed) */ compatible = "nxp,pcf85263"; reg = <0x51>; }; + + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; }; &i2c7 { -- 2.43.0