mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
To: bhelgaas@google.com, alex@shazbot.org, jjohnson@kernel.org
Cc: johannes@sipsolutions.net, mani@kernel.org, jgg@ziepe.ca,
	yishaih@nvidia.com, skolothumtho@nvidia.com,
	kevin.tian@intel.com, linux-pci@vger.kernel.org,
	kvm@vger.kernel.org, linux-wireless@vger.kernel.org,
	ath11k@lists.infradead.org, ath12k@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Subject: [PATCH 6/7] ath12k: add PCIe link recovery retry
Date: Wed, 30 Sep 2026 16:08:32 +0200	[thread overview]
Message-ID: <20260930140833.576941-7-jtornosm@redhat.com> (raw)
In-Reply-To: <20260930140833.576941-1-jtornosm@redhat.com>

When ath12k devices are passed through to VMs via PCIe passthrough,
the PCIe link may not stabilize immediately after global reset due to
virtualization layer timing variations. This causes MHI initialization
to fail with "BHI offset: 0xffffffff is out of range" errors because
the device is read before it's ready.

Currently, ath12k_pci_soc_global_reset() just warns if the link is
down but continues anyway, leading to inevitable MHI failures.

This patch adds:
1. A retry loop (up to 5000ms) to wait for the PCIe link to recover
   after global reset (similar to the existing LTSSM retry logic)
2. Proper error propagation to prevent continuing with a dead link

This is especially important for VM environments where timing can vary
significantly from bare metal.

Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
---
 drivers/net/wireless/ath/ath12k/pci.c | 39 ++++++++++++++++++++++-----
 1 file changed, 32 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/pci.c b/drivers/net/wireless/ath/ath12k/pci.c
index af0e882fd0b5..65712486d312 100644
--- a/drivers/net/wireless/ath/ath12k/pci.c
+++ b/drivers/net/wireless/ath/ath12k/pci.c
@@ -181,8 +181,10 @@ static void ath12k_pci_restore_window(struct ath12k_base *ab)
 	spin_unlock_bh(&ab_pci->window_lock);
 }
 
-static void ath12k_pci_soc_global_reset(struct ath12k_base *ab)
+static int ath12k_pci_soc_global_reset(struct ath12k_base *ab)
 {
+	unsigned long timeout;
+	bool link_recovered = false;
 	u32 val, delay;
 
 	val = ath12k_pci_read32(ab, PCIE_SOC_GLOBAL_RESET);
@@ -206,14 +208,29 @@ static void ath12k_pci_soc_global_reset(struct ath12k_base *ab)
 
 	mdelay(delay);
 
-	val = ath12k_pci_read32(ab, PCIE_SOC_GLOBAL_RESET);
-	if (val == 0xffffffff)
-		ath12k_warn(ab, "link down error during global reset\n");
+	/* Wait for PCIe link to recover, especially important in VM environments
+	 * where timing can vary significantly from bare metal.
+	 */
+	timeout = jiffies + msecs_to_jiffies(5000);
+	while (time_before(jiffies, timeout)) {
+		val = ath12k_pci_read32(ab, PCIE_SOC_GLOBAL_RESET);
+		if (val != 0xffffffff) {
+			link_recovered = true;
+			break;
+		}
+		mdelay(20);
+	}
+	if (!link_recovered) {
+		ath12k_err(ab, "PCIe link failed to recover - device may need power cycle\n");
+		return -ETIMEDOUT;
+	}
 
 	/* Restore window register as its content is cleared during
 	 * hardware global reset, such that it aligns with host cache.
 	 */
 	ath12k_pci_restore_window(ab);
+
+	return 0;
 }
 
 static void ath12k_pci_clear_dbg_registers(struct ath12k_base *ab)
@@ -299,8 +316,10 @@ static void ath12k_pci_force_wake(struct ath12k_base *ab)
 	mdelay(5);
 }
 
-static void ath12k_pci_sw_reset(struct ath12k_base *ab, bool power_on)
+static int ath12k_pci_sw_reset(struct ath12k_base *ab, bool power_on)
 {
+	int ret;
+
 	if (power_on) {
 		ath12k_pci_enable_ltssm(ab);
 		ath12k_pci_clear_all_intrs(ab);
@@ -309,8 +328,12 @@ static void ath12k_pci_sw_reset(struct ath12k_base *ab, bool power_on)
 
 	ath12k_mhi_clear_vector(ab);
 	ath12k_pci_clear_dbg_registers(ab);
-	ath12k_pci_soc_global_reset(ab);
+	ret = ath12k_pci_soc_global_reset(ab);
+	if (ret)
+		return ret;
 	ath12k_mhi_set_mhictrl_reset(ab);
+
+	return 0;
 }
 
 static void ath12k_pci_free_ce_irq(struct ath12k_base *ab, int num_ce)
@@ -1452,7 +1475,9 @@ int ath12k_pci_power_up(struct ath12k_base *ab)
 
 	ab_pci->register_window = 0;
 	clear_bit(ATH12K_PCI_FLAG_INIT_DONE, &ab_pci->flags);
-	ath12k_pci_sw_reset(ab_pci->ab, true);
+	ret = ath12k_pci_sw_reset(ab_pci->ab, true);
+	if (ret)
+		return ret;
 
 	/* Disable ASPM during firmware download due to problems switching
 	 * to AMSS state.
-- 
2.55.0


  parent reply	other threads:[~2026-09-30 14:10 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-30 14:08 [PATCH 0/7] Enable Qualcomm WiFi PCIe passthrough to VMs Jose Ignacio Tornos Martinez
2026-09-30 14:08 ` [PATCH 1/7] PCI: Add pci_find_free_ext_cap_offset() helper Jose Ignacio Tornos Martinez
2026-09-30 14:08 ` [PATCH 2/7] vfio: Add qcom_vfio.h header for MSI cache protocol Jose Ignacio Tornos Martinez
2026-09-30 14:08 ` [PATCH 3/7] vfio/pci: Add qcom-vfio-pci variant driver Jose Ignacio Tornos Martinez
2026-09-30 15:12   ` Jason Gunthorpe
2026-09-30 14:08 ` [PATCH 4/7] ath11k: add PCIe link recovery retry Jose Ignacio Tornos Martinez
2026-09-30 14:08 ` [PATCH 5/7] ath11k: Use VFIO MSI cache when available Jose Ignacio Tornos Martinez
2026-09-30 14:08 ` Jose Ignacio Tornos Martinez [this message]
2026-09-30 14:08 ` [PATCH 7/7] ath12k: " Jose Ignacio Tornos Martinez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260930140833.576941-7-jtornosm@redhat.com \
    --to=jtornosm@redhat.com \
    --cc=alex@shazbot.org \
    --cc=ath11k@lists.infradead.org \
    --cc=ath12k@lists.infradead.org \
    --cc=bhelgaas@google.com \
    --cc=jgg@ziepe.ca \
    --cc=jjohnson@kernel.org \
    --cc=johannes@sipsolutions.net \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=mani@kernel.org \
    --cc=skolothumtho@nvidia.com \
    --cc=yishaih@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®