[PATCH v2 3/3] PCI: Do not mistake an absent device for an active link

["Francisco Beltrán Millalén" <fbeltranmillalen@gmail.com>]

When a bridge is no longer accessible, its Link Status register reads
as 0xffff, which has both PCI_EXP_LNKSTA_DLLLA and PCI_EXP_LNKSTA_LT
set.  The code that waits for the link then takes a dead link for an
active one:

  - pci_bridge_wait_for_secondary_bus(), for ports up to 5 GT/s, decides
    that the link is up and waits PCIE_RESET_READY_POLL_MS for the device
    below it;

  - pcie_wait_for_link_status(), used for faster ports and by
    pcie_retrain_link(), reports success at once when waiting for an
    active link, and times out after PCIE_LINK_RETRAIN_TIMEOUT_MS when
    waiting for LT to clear.

Treat an all-ones read as the device being gone.  All callers of
pcie_wait_for_link_status() and pcie_retrain_link() treat any non-zero
return as failure.

On a MacBookPro14,3 whose Thunderbolt controller does not come back from
S3, the downstream ports of the controller are 2.5 GT/s ports that no
longer answer.  Resume spent about 65 seconds waiting for the xHCI
controller behind one of them ("not ready 65535ms after resume"); with
the pci_bridge_wait_for_secondary_bus() change it gives up on that
controller after about one second.  That machine never reaches
pcie_wait_for_link_status() in this situation, so that part has not been
tested.

Assisted-by: LLM
Signed-off-by: Francisco Beltrán Millalén <fbeltranmillalen@gmail.com>
---
v2:
- Also check in pcie_wait_for_link_status() (faster ports and
  pcie_retrain_link()); not tested.
- Say that it is the bridge that is gone.

 drivers/pci/pci.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 94de99d31..2e31d18b2 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4586,8 +4586,8 @@ static int pci_pm_reset(struct pci_dev *dev, bool probe)
  * @use_lt: Use the LT bit if TRUE, or the DLLLA bit if FALSE.
  * @active: Waiting for active or inactive?
  *
- * Return 0 if successful, or -ETIMEDOUT if status has not changed within
- * PCIE_LINK_RETRAIN_TIMEOUT_MS milliseconds.
+ * Return 0 if successful, -ENODEV if @pdev is not accessible, or -ETIMEDOUT
+ * if status has not changed within PCIE_LINK_RETRAIN_TIMEOUT_MS milliseconds.
  */
 static int pcie_wait_for_link_status(struct pci_dev *pdev,
 				     bool use_lt, bool active)
@@ -4602,6 +4602,9 @@ static int pcie_wait_for_link_status(struct pci_dev *pdev,
 	end_jiffies = jiffies + msecs_to_jiffies(PCIE_LINK_RETRAIN_TIMEOUT_MS);
 	do {
 		pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnksta);
+		/* All ones means @pdev is gone; it would look like an active link */
+		if (PCI_POSSIBLE_ERROR(lnksta))
+			return -ENODEV;
 		if ((lnksta & lnksta_mask) == lnksta_match)
 			return 0;
 		msleep(1);
@@ -4624,8 +4627,9 @@ static int pcie_wait_for_link_status(struct pci_dev *pdev,
  * according to @use_lt.  It is not verified whether the use of the DLLLA
  * bit is valid.
  *
- * Return 0 if successful, or -ETIMEDOUT if training has not completed
- * within PCIE_LINK_RETRAIN_TIMEOUT_MS milliseconds.
+ * Return 0 if successful, -ENODEV if @pdev is not accessible, or -ETIMEDOUT
+ * if training has not completed within PCIE_LINK_RETRAIN_TIMEOUT_MS
+ * milliseconds.
  */
 int pcie_retrain_link(struct pci_dev *pdev, bool use_lt)
 {
@@ -4858,8 +4862,10 @@ int pci_bridge_wait_for_secondary_bus(struct pci_dev *dev, char *reset_type)
 		if (!dev->link_active_reporting)
 			return -ENOTTY;
 
+		/* All ones means @dev is gone; it would look like an active link */
 		pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &status);
-		if (!(status & PCI_EXP_LNKSTA_DLLLA))
+		if (PCI_POSSIBLE_ERROR(status) ||
+		    !(status & PCI_EXP_LNKSTA_DLLLA))
 			return -ENOTTY;
 
 		return pci_dev_wait(child, reset_type,