mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Luca Ceresoli <luca.ceresoli@bootlin.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	 Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	 David Airlie <airlied@gmail.com>,
	Simona Vetter <simona@ffwll.ch>,
	 Andrzej Hajda <andrzej.hajda@intel.com>,
	 Neil Armstrong <neil.armstrong@linaro.org>,
	Robert Foss <rfoss@kernel.org>,
	 Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	 Jonas Karlman <jonas@kwiboo.se>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	 Inki Dae <inki.dae@samsung.com>,
	Jagan Teki <jagan@amarulasolutions.com>,
	 Marek Szyprowski <m.szyprowski@samsung.com>,
	 Jessica Zhang <jesszhan0024@gmail.com>,
	 Douglas Anderson <dianders@chromium.org>,
	Marek Vasut <marex@denx.de>,  Stefan Agner <stefan@agner.ch>,
	Frank Li <Frank.Li@nxp.com>,
	 Sascha Hauer <s.hauer@pengutronix.de>,
	 Pengutronix Kernel Team <kernel@pengutronix.de>,
	 Fabio Estevam <festevam@gmail.com>
Cc: Hui Pu <Hui.Pu@gehealthcare.com>,
	Ian Ray <ian.ray@gehealthcare.com>,
	 Luca Ceresoli <luca.ceresoli@bootlin.com>,
	 Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	 dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	 imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Subject: [PATCH RFC v2 23/24] drm: drm_hotplug_helper: new helper to implement bridge hotplug
Date: Thu, 01 Oct 2026 14:42:45 +0200	[thread overview]
Message-ID: <20261001-drm-bridge-hotplug-v2-23-8e34986dcb68@bootlin.com> (raw)
In-Reply-To: <20261001-drm-bridge-hotplug-v2-0-8e34986dcb68@bootlin.com>

Add a new helper to support cards implementing hotpluggable drm_bridges.

drmm_hotplug_helper_init() registers to get notified of relevant events and
react by creating a bridge (if the pipeline is complete in the hardware)
and destroying it on bridge removal.

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
 MAINTAINERS                                  |   8 +
 drivers/gpu/drm/display/Kconfig              |   6 +
 drivers/gpu/drm/display/Makefile             |   2 +
 drivers/gpu/drm/display/drm_hotplug_helper.c | 243 +++++++++++++++++++++++++++
 include/drm/drm_hotplug_helper.h             |  13 ++
 5 files changed, 272 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index c5ae9f2f408a..611790c175c4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8019,6 +8019,14 @@ F:	Documentation/devicetree/bindings/npu/rockchip,rk3588-rknn-core.yaml
 F:	drivers/accel/rocket/
 F:	include/uapi/drm/rocket_accel.h
 
+DRM BRIDGE HOTPLUG HELPER
+M:	Luca Ceresoli <luca.ceresoli@bootlin.com>
+S:	Maintained
+T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
+F:	Documentation/devicetree/bindings/display/bridge/
+F:	drivers/gpu/drm/display/drm_hotplug_helper.c
+F:	include/drm/drm_hotplug_helper.h
+
 DRM COMPUTE ACCELERATORS DRIVERS AND FRAMEWORK
 M:	Oded Gabbay <ogabbay@kernel.org>
 L:	dri-devel@lists.freedesktop.org
diff --git a/drivers/gpu/drm/display/Kconfig b/drivers/gpu/drm/display/Kconfig
index df09cf9a8ca1..f1a6ffcd4c63 100644
--- a/drivers/gpu/drm/display/Kconfig
+++ b/drivers/gpu/drm/display/Kconfig
@@ -22,6 +22,12 @@ config DRM_BRIDGE_CONNECTOR
 	help
 	  DRM connector implementation terminating DRM bridge chains.
 
+config DRM_HOTPLUG_HELPER
+	bool
+	select DRM_BRIDGE_CONNECTOR
+	help
+	  Helper code to implement a card supporting hotpluggable bridges.
+
 config DRM_DISPLAY_DP_AUX_CEC
 	bool "Enable DisplayPort CEC-Tunneling-over-AUX HDMI support"
 	select DRM_DISPLAY_DP_HELPER
diff --git a/drivers/gpu/drm/display/Makefile b/drivers/gpu/drm/display/Makefile
index 0ff4a1ad0222..ce6dbd65833b 100644
--- a/drivers/gpu/drm/display/Makefile
+++ b/drivers/gpu/drm/display/Makefile
@@ -5,6 +5,8 @@ obj-$(CONFIG_DRM_DISPLAY_DP_AUX_BUS) += drm_dp_aux_bus.o
 drm_display_helper-y := drm_display_helper_mod.o
 drm_display_helper-$(CONFIG_DRM_BRIDGE_CONNECTOR) += \
 	drm_bridge_connector.o
+drm_display_helper-$(CONFIG_DRM_HOTPLUG_HELPER) += \
+	drm_hotplug_helper.o
 drm_display_helper-$(CONFIG_DRM_DISPLAY_DP_HELPER) += \
 	drm_dp_dual_mode_helper.o \
 	drm_dp_helper.o \
diff --git a/drivers/gpu/drm/display/drm_hotplug_helper.c b/drivers/gpu/drm/display/drm_hotplug_helper.c
new file mode 100644
index 000000000000..1b89b14b52aa
--- /dev/null
+++ b/drivers/gpu/drm/display/drm_hotplug_helper.c
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2026 GE HealthCare
+ * Author: Luca Ceresoli <luca.ceresoli@bootlin.com>
+ */
+
+#include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
+#include <drm/drm_event_notifier.h>
+#include <drm/drm_hotplug_helper.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_print.h>
+
+struct drm_hotplug_helper {
+	/**
+	 * @drm: The DRM device we belong to
+	 */
+	struct drm_device *drm;
+	/**
+	 * @encoder:
+	 *
+	 * The encoder at the start of the bridges chain.
+	 */
+	struct drm_encoder *encoder;
+	/**
+	 * @drm_event_nb: notifier to receive DRM hotplug-related events
+	 */
+	struct notifier_block drm_event_nb;
+	/**
+	 * @connector: the drm_connector added/removed on plug/unplug
+	 */
+	struct drm_connector *connector;
+	/**
+	 * @connector_mutex: Protect @connector from concurrent creation and
+	 * destruction
+	 */
+	struct mutex connector_mutex;
+};
+
+static bool drm_hotplug_helper_pipeline_is_complete(struct drm_hotplug_helper *hotplug_helper)
+{
+	struct drm_bridge *last_bridge __free(drm_bridge_put) =
+		drm_bridge_chain_get_last_bridge(hotplug_helper->encoder);
+
+	/* We expect at least one bridge */
+	if (!last_bridge) {
+		drm_dbg_driver(hotplug_helper->drm, "no bridges in pipeline (yet)\n");
+		return false;
+	}
+
+	struct drm_bridge *next_bridge __free(drm_bridge_put) =
+		drm_bridge_get_next(last_bridge);
+
+	/* No next bridge expected, pipeline is complete */
+	if (!next_bridge) {
+		drm_dbg_driver(hotplug_helper->drm, "pipeline complete\n");
+		return true;
+	}
+
+	/* Next bridge expected but not there now, pipeline incomplete */
+	if (next_bridge == ERR_PTR(-ENODEV)) {
+		drm_dbg_driver(hotplug_helper->drm, "pipeline not (yet) complete\n");
+		return false;
+	}
+
+	/* Unexpected error */
+	if (IS_ERR(next_bridge))
+		drm_warn(hotplug_helper->drm, "%s error %pe\n", __func__, next_bridge);
+
+	/* next_bridge is valid, but not (yet|anymore) in chain */
+	return false;
+}
+
+/**
+ * drm_hotplug_helper_connector_add - add the drm_connector
+ * @hotplug_helper: drm_hotplug_helper to add the drm_connector to
+ *
+ * Returns 0 on success or a negative error otherwise.
+ */
+static int drm_hotplug_helper_connector_add(struct drm_hotplug_helper *hotplug_helper)
+{
+	struct drm_connector *connector;
+
+	guard(mutex)(&hotplug_helper->connector_mutex);
+
+	if (drm_WARN_ON(hotplug_helper->drm, hotplug_helper->connector))
+		return -EBUSY;
+
+	connector = drm_bridge_connector_dynamic_add(hotplug_helper->drm,
+						     hotplug_helper->encoder);
+	if (IS_ERR(connector))
+		return PTR_ERR(connector);
+
+	hotplug_helper->connector = connector;
+
+	return 0;
+}
+
+static void drm_hotplug_helper_connector_remove(struct drm_hotplug_helper *hotplug_helper)
+{
+	guard(mutex)(&hotplug_helper->connector_mutex);
+
+	if (drm_WARN_ON(hotplug_helper->drm, !hotplug_helper->connector))
+		return;
+
+	drm_bridge_connector_dynamic_remove(hotplug_helper->connector);
+	hotplug_helper->connector = NULL;
+}
+
+/*
+ * Propagate the attach chain and possibly add a drm_bridge_connector after
+ * a new drm_bridge is hot-plugged.
+ *
+ * The connector is added only if the pipeline is now complete. This could
+ * not be the case for various reasons:
+ *
+ * - the new bridge is just unrelated to our encoder
+ * - the new bridge is not be the next one in the pipeline
+ * - the new bridge is the next in the pipeline but the pipeline is not yet
+ *   complete
+ *
+ * All these cases are normal, not an error.
+ */
+static void drm_hotplug_helper_try_complete(struct drm_hotplug_helper *hotplug_helper)
+{
+	int err;
+
+	/*
+	 * drm_connector already present, the new bridge must be for
+	 * another card
+	 */
+	if (hotplug_helper->connector)
+		return;
+
+	/* Propagate the attach call chain to newly hotplugged bridge(s) */
+	struct drm_bridge *last_bridge __free(drm_bridge_put) =
+		drm_bridge_chain_get_last_bridge(hotplug_helper->encoder);
+	err = last_bridge->funcs->attach(last_bridge, hotplug_helper->encoder,
+					 DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+	if (err)
+		return;
+
+	/* Add the connector if the pipeline is now complete */
+	if (drm_hotplug_helper_pipeline_is_complete(hotplug_helper))
+		drm_hotplug_helper_connector_add(hotplug_helper);
+}
+
+static int drm_hotplug_helper_handle_event(struct notifier_block *nb,
+					   unsigned long event, void *data)
+{
+	struct drm_hotplug_helper *hotplug_helper =
+		container_of(nb, struct drm_hotplug_helper, drm_event_nb);
+
+	switch (event) {
+	case DRM_MIPI_DSI_ATTACHED:
+		/* One or more bridges hot-plugged, try adding the drm_bridge_connector */
+		drm_hotplug_helper_try_complete(hotplug_helper);
+		break;
+	case DRM_BRIDGE_DETACHED:
+	{
+		/*
+		 * A bridge was unplugged, remove the drm_bridge_connector
+		 * if it's part of the same pipeline
+		 */
+		struct drm_bridge *bridge = (struct drm_bridge *)data;
+
+		if (hotplug_helper->connector &&
+		    bridge->encoder == hotplug_helper->encoder)
+			drm_hotplug_helper_connector_remove(hotplug_helper);
+		break;
+	}
+	default:
+	}
+
+	return NOTIFY_DONE;
+}
+
+static void drm_hotplug_helper_fini(struct drm_device *dev, void *res)
+{
+	struct drm_hotplug_helper *hotplug_helper = (struct drm_hotplug_helper *)res;
+
+	drm_hotplug_helper_connector_remove(hotplug_helper);
+}
+
+static void drm_hotplug_helper_notifier_unregister(struct drm_device *dev, void *res)
+{
+	struct notifier_block *nb = (struct notifier_block *)res;
+
+	drm_event_notifier_unregister(nb);
+}
+
+/**
+ * drmm_hotplug_helper_init - Initialise the hotplug helper for an encoder
+ * @drm: the DRM device
+ * @encoder: the encoder where the bridge chain starts
+ *
+ * Register to receive hotplug-related events and react to them:
+ * - when a new bridge appears, check if the pipeline is now complete in
+ *   the hardware, and if it is add a drm_bridge_connector which will add a
+ *   drm_connector
+ * - when a bridge dispears, remove the drm_bridge_connector which will
+ *   remove the drm_connector
+ *
+ * Returns a pointer to the new &drm_hotplug_helper on success, or a
+ * negative error pointer otherwise.
+ */
+struct drm_hotplug_helper *drmm_hotplug_helper_init(struct drm_device *drm,
+						    struct drm_encoder *encoder)
+{
+	struct drm_hotplug_helper *hotplug_helper;
+	int ret;
+
+	hotplug_helper = drmm_kzalloc(drm, sizeof(*hotplug_helper), GFP_KERNEL);
+	if (!hotplug_helper)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&hotplug_helper->connector_mutex);
+	hotplug_helper->drm = drm;
+	hotplug_helper->encoder = encoder;
+	hotplug_helper->drm_event_nb.notifier_call = drm_hotplug_helper_handle_event;
+
+	if (drm_hotplug_helper_pipeline_is_complete(hotplug_helper)) {
+		ret = drm_hotplug_helper_connector_add(hotplug_helper);
+		if (ret)
+			return ERR_PTR(ret);
+	}
+
+	ret = drmm_add_action_or_reset(drm, drm_hotplug_helper_fini, hotplug_helper);
+	if (ret)
+		return ERR_PTR(ret);
+
+	ret = drm_event_notifier_register(&hotplug_helper->drm_event_nb);
+	if (ret)
+		return ERR_PTR(ret);
+
+	ret = drmm_add_action_or_reset(drm, drm_hotplug_helper_notifier_unregister,
+				       &hotplug_helper->drm_event_nb);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(drmm_hotplug_helper_init);
diff --git a/include/drm/drm_hotplug_helper.h b/include/drm/drm_hotplug_helper.h
new file mode 100644
index 000000000000..26779a0b6554
--- /dev/null
+++ b/include/drm/drm_hotplug_helper.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2026 GE HealthCare
+ * Author: Luca Ceresoli <luca.ceresoli@bootlin.com>
+ */
+
+#ifndef __DRM_HOTPLUG_HELPER_H__
+#define __DRM_HOTPLUG_HELPER_H__
+
+struct drm_hotplug_helper *drmm_hotplug_helper_init(struct drm_device *drm,
+						    struct drm_encoder *encoder);
+
+#endif /* __DRM_HOTPLUG_HELPER_H__ */

-- 
2.55.0


  parent reply	other threads:[~2026-10-01 12:45 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-01 12:42 [PATCH RFC v2 00/24] drm " Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 01/24] drm/connector: split drmm_connector_hdmi_init() in 3 parts Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 02/24] drm/connector: add drm_connector_hdmi_dynamic_init() Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 03/24] drm/display: bridge-connector: split code allocation from initialization Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 04/24] drm/display: bridge-connector: hoist error management to common code Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 05/24] drm/display: bridge-connector: use a dynamic connector Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 06/24] drm/display: bridge-connector: add APIs to add/remove the connector dynamically Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 07/24] drm/bridge: samsung-dsim: move drm_bridge_add() call to probe Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 08/24] drm/bridge: initialize chain_node list head on allocation Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 09/24] drm/bridge: initialize chain_node list head on detach and attach errors Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 10/24] drm/encoder: add drm_encoder_cleanup_from() Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 11/24] drm/atomic: move drm_atomic_helper_disable_all() and drm_atomic_helper_shutdown() from drm_atomic_helper to drm_atomic Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 12/24] drm/bridge: shutdown and cleanup on bridge unplug Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 13/24] drm/mipi-dsi: turn DRM_MIPI_DSI into a tristate Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 14/24] drm: event-notifier: add mechanism to notify about hotplug events Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 15/24] drm/bridge: notify about detached bridges Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 16/24] drm/mipi-dsi: notify about DSI attach Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 17/24] drm/bridge: add drm_bridge_get_next() and supporting func Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 18/24] drm/panel: implement .get_next_bridge Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 19/24] drm/bridge: display-connector: " Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 20/24] drm/bridge: ti-sn65dsi83: " Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 21/24] drm/bridge: ti-sn65dsi86: " Luca Ceresoli
2026-10-01 12:42 ` [PATCH RFC v2 22/24] drm/bridge: samsung-dsim: " Luca Ceresoli
2026-10-01 12:42 ` Luca Ceresoli [this message]
2026-10-01 12:42 ` [PATCH RFC v2 24/24] drm/mxsfb/lcdif: enable bridge hotplug Luca Ceresoli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261001-drm-bridge-hotplug-v2-23-8e34986dcb68@bootlin.com \
    --to=luca.ceresoli@bootlin.com \
    --cc=Frank.Li@nxp.com \
    --cc=Hui.Pu@gehealthcare.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=airlied@gmail.com \
    --cc=andrzej.hajda@intel.com \
    --cc=dianders@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=festevam@gmail.com \
    --cc=ian.ray@gehealthcare.com \
    --cc=imx@lists.linux.dev \
    --cc=inki.dae@samsung.com \
    --cc=jagan@amarulasolutions.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=jesszhan0024@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=marex@denx.de \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=rfoss@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=simona@ffwll.ch \
    --cc=stefan@agner.ch \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®