mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Anton Danilov <littlesmilingcloud@gmail.com>
To: netdev@vger.kernel.org
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>,
	Jason Wang <jasowangio@gmail.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Simon Horman <horms@kernel.org>, Ido Schimmel <idosch@nvidia.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next] tun: use pskb_may_pull_reason() and remove SKB_DROP_REASON_HDR_TRUNC
Date: Thu,  1 Oct 2026 12:39:25 +0300	[thread overview]
Message-ID: <20261001093925.3529772-1-littlesmilingcloud@gmail.com> (raw)

tun_get_user() is the only user of SKB_DROP_REASON_HDR_TRUNC. It sets
it when pskb_may_pull() fails to pull the Ethernet header of a frame
written to a TAP device.

pskb_may_pull_reason() reports why the pull failed: PKT_TOO_SMALL if
the packet is shorter than requested, NOMEM if pulling the data into
the linear area fails. Use it for the Ethernet header pull in
tun_get_user() and remove the now unused SKB_DROP_REASON_HDR_TRUNC.

After a successful pull drop_reason is SKB_NOT_DROPPED_YET. The path
that later finds the queue detached has no reason of its own and relied
on the SKB_DROP_REASON_NOT_SPECIFIED initializer. Fall back to
SKB_DROP_REASON_NOT_SPECIFIED at the free_skb label, as vxlan_rcv()
does, so that this path, and any later one without a reason of its own,
keeps reporting it.

The error returned to user space does not change.

Suggested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/netdev/20260923145931.GA2859441@shredder/
Assisted-by: LLM
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>

---
 drivers/net/tun.c             | 5 +++--
 include/net/dropreason-core.h | 7 -------
 2 files changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 5a302709a68a..758956f93979 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1932,9 +1932,9 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile,
 		skb->dev = tun->dev;
 		break;
 	case IFF_TAP:
-		if (!pskb_may_pull(skb, ETH_HLEN)) {
+		drop_reason = pskb_may_pull_reason(skb, ETH_HLEN);
+		if (drop_reason) {
 			err = -ENOMEM;
-			drop_reason = SKB_DROP_REASON_HDR_TRUNC;
 			goto drop;
 		}
 		skb->protocol = eth_type_trans(skb, tun->dev);
@@ -2062,6 +2062,7 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile,
 		dev_core_stats_rx_dropped_inc(tun->dev);
 
 free_skb:
+	drop_reason = drop_reason ?: SKB_DROP_REASON_NOT_SPECIFIED;
 	if (!IS_ERR_OR_NULL(skb))
 		kfree_skb_reason(skb, drop_reason);
 
diff --git a/include/net/dropreason-core.h b/include/net/dropreason-core.h
index 12f909651591..47b44a29daab 100644
--- a/include/net/dropreason-core.h
+++ b/include/net/dropreason-core.h
@@ -82,7 +82,6 @@
 	FN(DEV_READY)			\
 	FN(FULL_RING)			\
 	FN(NOMEM)			\
-	FN(HDR_TRUNC)			\
 	FN(TAP_FILTER)			\
 	FN(TAP_TXFILTER)		\
 	FN(ICMP_CSUM)			\
@@ -427,12 +426,6 @@ enum skb_drop_reason {
 	SKB_DROP_REASON_FULL_RING,
 	/** @SKB_DROP_REASON_NOMEM: error due to OOM */
 	SKB_DROP_REASON_NOMEM,
-	/**
-	 * @SKB_DROP_REASON_HDR_TRUNC: failed to trunc/extract the header from
-	 * networking data, e.g., failed to pull the protocol header from
-	 * frags via pskb_may_pull()
-	 */
-	SKB_DROP_REASON_HDR_TRUNC,
 	/**
 	 * @SKB_DROP_REASON_TAP_FILTER: dropped by (ebpf) filter directly attached
 	 * to tun/tap, e.g., via TUNSETFILTEREBPF
-- 
2.47.3


             reply	other threads:[~2026-10-01  9:39 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-01  9:39 Anton Danilov [this message]
2026-10-01 17:24 ` Ido Schimmel
2026-10-01 19:00 ` Willem de Bruijn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261001093925.3529772-1-littlesmilingcloud@gmail.com \
    --to=littlesmilingcloud@gmail.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=idosch@nvidia.com \
    --cc=jasowangio@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=willemdebruijn.kernel@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®