[PATCH v7] media: qcom: iris: release OPP constraints on VPU power-on failure

[Hungyu Lin <dennylin0707@gmail.com>]

The per-block cleanup paths request a zero rate through
iris_opp_set_rate(). This selects the minimum OPP rather than
disabling the OPP constraints, so a failed VPU power-on can leave
required-OPP performance-state requests installed. Supplier reference
cleanup after a failed runtime resume does not itself request supplier
suspension.

Move the maximum OPP request to iris_vpu_power_on(), leaving the
per-block helpers responsible for their power domains and clocks.

When controller or hardware power-on fails after the OPP request
succeeds, unwind the acquired clocks and functional domains, then
disable the OPP constraints with dev_pm_opp_set_opp(dev, NULL).

Report an OPP-disable failure without replacing the original error,
and continue ICC cleanup. Keep failures of the maximum OPP request on
the ICC-only cleanup path. Recovery from partial failures in the OPP
transition itself and the existing normal-power-off behavior are
outside this change.

Fixes: f6940b79fcb6 ("media: iris: Fix opp scaling of power domains")
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
---
Changes in v7:
- Rebase the fix onto the updated power-domain and clock helpers.
- Remove OPP handling from the per-block power-domain and clock helpers.
- Keep the maximum OPP request in iris_vpu_power_on().
- Use the NULL-OPP disable path for failures after a successful maximum
  OPP request.
- Keep a separate ICC-only cleanup path when the maximum OPP request
  itself fails.
- Preserve the original power-on error if OPP disable fails.

Changes in v6:
- Move OPP handling from the power-domain helpers to
  iris_vpu_power_on().
- Request the maximum OPP before powering on the controller and
  hardware.
- Add a zero-rate OPP request to the VPU power-on error path.
- Keep the power-domain helpers limited to runtime PM operations.
- Replace pm_runtime_get_sync() with pm_runtime_resume_and_get().
- Rename the patch to reflect the new approach.
- Update the Fixes tag to the commit that introduced required-OPP
  performance states.

Changes in v5:
- Return pm_runtime_resume_and_get() directly.
- Handle pm_runtime_put_sync() failures while preserving an earlier
  OPP-update error.
- Add a blank line before the rollback return.

Changes in v4:
- Convert the OPP rollback to a goto-based cleanup path.

 drivers/media/platform/qcom/iris/iris_resources.c  |  7 -------
 drivers/media/platform/qcom/iris/iris_vpu_common.c | 12 ++++++++++--
 2 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/media/platform/qcom/iris/iris_resources.c b/drivers/media/platform/qcom/iris/iris_resources.c
index 7149a5bf4e7f..b1734e5ecf60 100644
--- a/drivers/media/platform/qcom/iris/iris_resources.c
+++ b/drivers/media/platform/qcom/iris/iris_resources.c
@@ -77,10 +77,6 @@ int iris_enable_power_domain_and_clocks(struct iris_core *core, struct iris_powe
 {
 	int ret, i;
 
-	ret = iris_opp_set_rate(core->dev, ULONG_MAX);
-	if (ret)
-		return ret;
-
 	for (i = 0; i < pd->pd_cnt; i++) {
 		ret = pm_runtime_resume_and_get(pd->dev[i]);
 		if (ret < 0)
@@ -94,8 +90,6 @@ int iris_enable_power_domain_and_clocks(struct iris_core *core, struct iris_powe
 	return 0;
 
 error:
-	iris_opp_set_rate(core->dev, 0);
-
 	while (--i >= 0)
 		pm_runtime_put_sync(pd->dev[i]);
 
@@ -107,7 +101,6 @@ void iris_disable_power_domain_and_clocks(struct iris_core *core, struct iris_po
 	int i;
 
 	clk_bulk_disable_unprepare(pd->clk_cnt, pd->clocks);
-	iris_opp_set_rate(core->dev, 0);
 
 	for (i = 0; i < pd->pd_cnt; i++)
 		pm_runtime_put_sync(pd->dev[i]);
diff --git a/drivers/media/platform/qcom/iris/iris_vpu_common.c b/drivers/media/platform/qcom/iris/iris_vpu_common.c
index 22d394851ef1..9bd59bbfc109 100644
--- a/drivers/media/platform/qcom/iris/iris_vpu_common.c
+++ b/drivers/media/platform/qcom/iris/iris_vpu_common.c
@@ -413,16 +413,20 @@ u64 iris_vpu3x_vpu4x_calculate_frequency(struct iris_inst *inst, size_t data_siz
 int iris_vpu_power_on(struct iris_core *core)
 {
 	u32 freq;
-	int ret;
+	int ret, opp_ret;
 
 	ret = iris_set_icc_bw(core, INT_MAX);
 	if (ret)
 		goto err;
 
-	ret = core->iris_platform_data->vpu_ops->power_on_controller(core);
+	ret = iris_opp_set_rate(core->dev, ULONG_MAX);
 	if (ret)
 		goto err_unvote_icc;
 
+	ret = core->iris_platform_data->vpu_ops->power_on_controller(core);
+	if (ret)
+		goto err_opp;
+
 	ret = core->iris_platform_data->vpu_ops->power_on_hw(core);
 	if (ret)
 		goto err_power_off_ctrl;
@@ -442,6 +446,10 @@ int iris_vpu_power_on(struct iris_core *core)
 
 err_power_off_ctrl:
 	core->iris_platform_data->vpu_ops->power_off_controller(core);
+err_opp:
+	opp_ret = dev_pm_opp_set_opp(core->dev, NULL);
+	if (opp_ret)
+		dev_warn(core->dev, "failed to disable OPP: %d\n", opp_ret);
 err_unvote_icc:
 	iris_unset_icc_bw(core);
 err:
-- 
2.43.0