From: Leonardo Costa <leoreis.costa@gmail.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
Frank.Li@nxp.com, s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, francesco.dolcini@toradex.com,
leonardo.costa@toradex.com, hvilleneuve@dimonoff.com,
marex@nabladev.com, stefano.r@variscite.com
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 0/7] ARM: dts: Add Apalis iMX6 overlays
Date: Thu, 1 Oct 2026 12:52:50 -0300 [thread overview]
Message-ID: <20261001155412.3177428-1-leoreis.costa@gmail.com> (raw)
From: Leonardo Costa <leonardo.costa@toradex.com>
This series adds device tree overlays for the Apalis iMX6 SoM. The
overlays cover HDMI, parallel and LVDS displays, audio configuration and
OV5640 CSI camera modules.
The series adds support for:
- HDMI Displays
- Toradex Capacitive Touch Display 10.1" LVDS
- Toradex Capacitive and Resistive Touch 7" Parallel Displays
- NAU8822 Bridge Tied Load configuration on the Apalis Evaluation Board V1.2
- Toradex OV5640 CSI camera variants with 27 MHz and 24 MHz oscillators
The Makefile entries build the standalone overlays as DTBOs, and add
ready-to-use composed DTBs for selected carrier boards and accessory
combinations, for build-time coverage.
Leonardo Costa (7):
ARM: dts: imx6q-apalis: Add HDMI Overlay
ARM: dts: imx6q-apalis-ixora: Add 3.3V_SW power regulator
ARM: dts: imx6q-apalis: Add Toradex Capacitive Touch Display 10.1"
LVDS
ARM: dts: imx6q-apalis: Add Toradex Capacitive Touch Display 7"
Parallel
ARM: dts: imx6q-apalis: Add Toradex Resistive Touch Display 7"
Parallel
ARM: dts: imx6q-apalis: Add NAU8822 Bridge Tied Load
ARM: dts: imx6q-apalis: Add Toradex OV5640 CSI Cameras
arch/arm/boot/dts/nxp/imx/Makefile | 87 +++++++++++++++++++
.../imx6q-apalis-eval-v1.2-nau8822-btl.dtso | 15 ++++
.../boot/dts/nxp/imx/imx6q-apalis-hdmi.dtso | 13 +++
.../dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts | 7 ++
.../boot/dts/nxp/imx/imx6q-apalis-ixora.dts | 7 ++
.../nxp/imx/imx6q-apalis-ov5640-24mhz.dtso | 17 ++++
.../boot/dts/nxp/imx/imx6q-apalis-ov5640.dtsi | 68 +++++++++++++++
.../boot/dts/nxp/imx/imx6q-apalis-ov5640.dtso | 18 ++++
...6q-apalis-panel-cap-touch-10inch-lvds.dtso | 53 +++++++++++
...apalis-panel-cap-touch-7inch-parallel.dtso | 34 ++++++++
...apalis-panel-res-touch-7inch-parallel.dtso | 30 +++++++
arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi | 86 ------------------
12 files changed, 349 insertions(+), 86 deletions(-)
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2-nau8822-btl.dtso
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-hdmi.dtso
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-ov5640-24mhz.dtso
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-ov5640.dtsi
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-ov5640.dtso
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-panel-cap-touch-10inch-lvds.dtso
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-panel-cap-touch-7inch-parallel.dtso
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-panel-res-touch-7inch-parallel.dtso
next reply other threads:[~2026-10-01 15:54 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-01 15:52 Leonardo Costa [this message]
2026-10-01 15:52 ` [PATCH 1/7] ARM: dts: imx6q-apalis: Add HDMI Overlay Leonardo Costa
2026-10-01 16:11 ` Frank Li
2026-10-01 15:52 ` [PATCH 2/7] ARM: dts: imx6q-apalis-ixora: Add 3.3V_SW power regulator Leonardo Costa
2026-10-01 15:52 ` [PATCH 3/7] ARM: dts: imx6q-apalis: Add Toradex Capacitive Touch Display 10.1" LVDS Leonardo Costa
2026-10-01 16:26 ` Frank Li
2026-10-01 15:52 ` [PATCH 4/7] ARM: dts: imx6q-apalis: Add Toradex Capacitive Touch Display 7" Parallel Leonardo Costa
2026-10-01 15:52 ` [PATCH 5/7] ARM: dts: imx6q-apalis: Add Toradex Resistive " Leonardo Costa
2026-10-01 16:19 ` Frank Li
2026-10-01 15:52 ` [PATCH 6/7] ARM: dts: imx6q-apalis: Add NAU8822 Bridge Tied Load Leonardo Costa
2026-10-01 15:52 ` [PATCH 7/7] ARM: dts: imx6q-apalis: Add Toradex OV5640 CSI Cameras Leonardo Costa
2026-10-01 16:21 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261001155412.3177428-1-leoreis.costa@gmail.com \
--to=leoreis.costa@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=francesco.dolcini@toradex.com \
--cc=hvilleneuve@dimonoff.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=leonardo.costa@toradex.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marex@nabladev.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=stefano.r@variscite.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®