From: "Thomas Richard (congatec GmbH)" <thomas.richard@bootlin.com>
To: Lee Jones <lee@kernel.org>, Andi Shyti <andi.shyti@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Werner Gartner <Werner.Gartner@congatec.com>,
mfd@lists.linux.dev, linux-kernel@vger.kernel.org,
linux-i2c@vger.kernel.org,
"Thomas Richard (congatec GmbH)" <thomas.richard@bootlin.com>
Subject: [PATCH v4 3/9] i2c: cgbc: Use plateform data to get bus ID and adapter name
Date: Fri, 02 Oct 2026 13:12:41 +0200 [thread overview]
Message-ID: <20261002-cgbc-i2c-storage-devices-support-v4-3-eb42e0f1df59@bootlin.com> (raw)
In-Reply-To: <20261002-cgbc-i2c-storage-devices-support-v4-0-eb42e0f1df59@bootlin.com>
Obtain the bus ID (from the BC point of view) and adapter name from
platform data. This allows the specific definitions to be removed, leaving
only a generic adapter definition.
Signed-off-by: Thomas Richard (congatec GmbH) <thomas.richard@bootlin.com>
---
drivers/i2c/busses/i2c-cgbc.c | 68 ++++++++++++++++---------------------------
1 file changed, 25 insertions(+), 43 deletions(-)
diff --git a/drivers/i2c/busses/i2c-cgbc.c b/drivers/i2c/busses/i2c-cgbc.c
index 25a74fa51aa0..cc1cd75c4d74 100644
--- a/drivers/i2c/busses/i2c-cgbc.c
+++ b/drivers/i2c/busses/i2c-cgbc.c
@@ -12,9 +12,6 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#define CGBC_I2C_PRIMARY_BUS_ID 0
-#define CGBC_I2C_PM_BUS_ID 4
-
#define CGBC_I2C_CMD_START 0x40
#define CGBC_I2C_CMD_STAT 0x48
#define CGBC_I2C_CMD_DATA 0x50
@@ -60,11 +57,6 @@ enum cgbc_i2c_state {
CGBC_I2C_STATE_ERROR,
};
-struct i2c_algo_cgbc_data {
- u8 bus_id;
- unsigned long read_maxtime_us;
-};
-
struct cgbc_i2c_data {
struct device *dev;
struct cgbc_device_data *cgbc;
@@ -73,6 +65,8 @@ struct cgbc_i2c_data {
int nmsgs;
int pos;
enum cgbc_i2c_state state;
+ u8 bus_id;
+ unsigned long read_maxtime_us;
};
struct cgbc_i2c_transfer {
@@ -115,10 +109,9 @@ static unsigned int cgbc_i2c_reg_to_freq(u8 reg)
static int cgbc_i2c_get_status(struct i2c_adapter *adap)
{
- struct i2c_algo_cgbc_data *algo_data = adap->algo_data;
struct cgbc_i2c_data *i2c = i2c_get_adapdata(adap);
struct cgbc_device_data *cgbc = i2c->cgbc;
- u8 cmd = CGBC_I2C_CMD_STAT | algo_data->bus_id;
+ u8 cmd = CGBC_I2C_CMD_STAT | i2c->bus_id;
u8 status;
int ret;
@@ -132,7 +125,6 @@ static int cgbc_i2c_get_status(struct i2c_adapter *adap)
static int cgbc_i2c_set_frequency(struct i2c_adapter *adap,
unsigned int bus_frequency)
{
- struct i2c_algo_cgbc_data *algo_data = adap->algo_data;
struct cgbc_i2c_data *i2c = i2c_get_adapdata(adap);
struct cgbc_device_data *cgbc = i2c->cgbc;
u8 cmd[2], data;
@@ -144,7 +136,7 @@ static int cgbc_i2c_set_frequency(struct i2c_adapter *adap,
bus_frequency = I2C_MAX_STANDARD_MODE_FREQ;
}
- cmd[0] = CGBC_I2C_CMD_SPEED | algo_data->bus_id;
+ cmd[0] = CGBC_I2C_CMD_SPEED | i2c->bus_id;
cmd[1] = cgbc_i2c_freq_to_reg(bus_frequency);
ret = cgbc_command(cgbc, &cmd, sizeof(cmd), &data, 1, NULL);
@@ -170,7 +162,7 @@ static int cgbc_i2c_set_frequency(struct i2c_adapter *adap,
* can be read by a command is CGBC_I2C_READ_MAX_LEN.
* Therefore, calculate the max time to properly size the timeout.
*/
- algo_data->read_maxtime_us = (BITS_PER_BYTE + 1) * CGBC_I2C_READ_MAX_LEN
+ i2c->read_maxtime_us = (BITS_PER_BYTE + 1) * CGBC_I2C_READ_MAX_LEN
* USEC_PER_SEC / bus_frequency;
return 0;
@@ -200,7 +192,6 @@ static unsigned int cgbc_i2c_xfer_to_cmd(struct cgbc_i2c_transfer xfer, u8 *cmd)
static int cgbc_i2c_xfer_msg(struct i2c_adapter *adap)
{
- struct i2c_algo_cgbc_data *algo_data = adap->algo_data;
struct cgbc_i2c_data *i2c = i2c_get_adapdata(adap);
struct cgbc_device_data *cgbc = i2c->cgbc;
struct i2c_msg *msg = i2c->msg;
@@ -210,7 +201,7 @@ static int cgbc_i2c_xfer_msg(struct i2c_adapter *adap)
u8 cmd_data;
struct cgbc_i2c_transfer xfer = {
- .bus_id = algo_data->bus_id,
+ .bus_id = i2c->bus_id,
.addr = i2c_8bit_addr_from_msg(msg),
};
@@ -268,11 +259,11 @@ static int cgbc_i2c_xfer_msg(struct i2c_adapter *adap)
ret = read_poll_timeout(cgbc_i2c_get_status, ret,
ret != CGBC_I2C_STAT_BUSY, 0,
- 2 * algo_data->read_maxtime_us, false, adap);
+ 2 * i2c->read_maxtime_us, false, adap);
if (ret < 0)
goto err;
- cmd_data = CGBC_I2C_CMD_DATA | algo_data->bus_id;
+ cmd_data = CGBC_I2C_CMD_DATA | i2c->bus_id;
ret = cgbc_command(cgbc, &cmd_data, sizeof(cmd_data),
msg->buf + i2c->pos, len, NULL);
if (ret)
@@ -335,44 +326,35 @@ static const struct i2c_algorithm cgbc_i2c_algorithm = {
.functionality = cgbc_i2c_func,
};
-static struct i2c_algo_cgbc_data cgbc_i2c_algo_data[] = {
- { .bus_id = CGBC_I2C_PRIMARY_BUS_ID },
- { .bus_id = CGBC_I2C_PM_BUS_ID },
-};
-
-static const struct i2c_adapter cgbc_i2c_adapter[] = {
- {
- .owner = THIS_MODULE,
- .name = "Congatec General Purpose I2C adapter",
- .class = I2C_CLASS_DEPRECATED,
- .algo = &cgbc_i2c_algorithm,
- .algo_data = &cgbc_i2c_algo_data[0],
- .nr = -1,
- },
- {
- .owner = THIS_MODULE,
- .name = "Congatec Power Management I2C adapter",
- .class = I2C_CLASS_DEPRECATED,
- .algo = &cgbc_i2c_algorithm,
- .algo_data = &cgbc_i2c_algo_data[1],
- .nr = -1,
- },
+static const struct i2c_adapter cgbc_i2c_adapter = {
+ .owner = THIS_MODULE,
+ .class = I2C_CLASS_DEPRECATED,
+ .algo = &cgbc_i2c_algorithm,
+ .nr = -1,
};
static int cgbc_i2c_probe(struct platform_device *pdev)
{
- struct cgbc_device_data *cgbc = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct cgbc_device_data *cgbc = dev_get_drvdata(dev->parent);
+ struct cgbc_i2c_platform_data *pdata;
struct cgbc_i2c_data *i2c;
int ret;
- i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+ i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
if (!i2c)
return -ENOMEM;
+ pdata = dev_get_platdata(dev);
+ if (!pdata)
+ return dev_err_probe(dev, -ENODEV, "missing platform_data\n");
+
i2c->cgbc = cgbc;
- i2c->dev = &pdev->dev;
- i2c->adap = cgbc_i2c_adapter[pdev->id];
+ i2c->dev = dev;
+ i2c->adap = cgbc_i2c_adapter;
i2c->adap.dev.parent = i2c->dev;
+ i2c->bus_id = pdata->cgbc_bus_id;
+ strscpy(i2c->adap.name, pdata->name, sizeof(i2c->adap.name));
i2c_set_adapdata(&i2c->adap, i2c);
platform_set_drvdata(pdev, i2c);
--
2.53.0
next prev parent reply other threads:[~2026-10-02 11:13 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-02 11:12 [PATCH v4 0/9] Congatec Board Controller: Add storage devices support Thomas Richard (congatec GmbH)
2026-10-02 11:12 ` [PATCH v4 1/9] mfd: cgbc: Fix use of negative error code as valid session handle Thomas Richard (congatec GmbH)
2026-10-15 15:19 ` Lee Jones
2026-10-15 17:53 ` Thomas Richard
2026-10-02 11:12 ` [PATCH v4 2/9] mfd: cgbc: Add I2C platform data Thomas Richard (congatec GmbH)
2026-10-02 11:12 ` Thomas Richard (congatec GmbH) [this message]
2026-10-02 11:12 ` [PATCH v4 4/9] mfd: cgbc: Use PLATFORM_DEVID_AUTO for child device registration Thomas Richard (congatec GmbH)
2026-10-15 15:27 ` Lee Jones
2026-10-15 17:48 ` Thomas Richard
2026-10-16 6:47 ` Lee Jones
2026-10-02 11:12 ` [PATCH v4 5/9] mfd: cgbc: Use real I2C bus names Thomas Richard (congatec GmbH)
2026-10-15 15:27 ` Lee Jones
2026-10-15 17:23 ` Thomas Richard
2026-10-02 11:12 ` [PATCH v4 6/9] i2c: cgbc: Add support for fixed frequency buses Thomas Richard (congatec GmbH)
2026-10-02 11:12 ` [PATCH v4 7/9] mfd: cgbc: Add virtual I2C bus support Thomas Richard (congatec GmbH)
2026-10-02 11:12 ` [PATCH v4 8/9] mfd: cgbc: Add virtual storage devices on the virtual I2C bus Thomas Richard (congatec GmbH)
2026-10-02 11:12 ` [PATCH v4 9/9] i2c: cgbc: Register known I2C devices on the bus Thomas Richard (congatec GmbH)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261002-cgbc-i2c-storage-devices-support-v4-3-eb42e0f1df59@bootlin.com \
--to=thomas.richard@bootlin.com \
--cc=Werner.Gartner@congatec.com \
--cc=andi.shyti@kernel.org \
--cc=lee@kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mfd@lists.linux.dev \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®