mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Qiliang Yuan <odys.yuan@gmail.com>
To: Ingo Molnar <mingo@redhat.com>,
	Peter Zijlstra <peterz@infradead.org>,
	 Juri Lelli <juri.lelli@redhat.com>,
	 Vincent Guittot <vincent.guittot@linaro.org>,
	 Dietmar Eggemann <dietmar.eggemann@arm.com>,
	 Steven Rostedt <rostedt@goodmis.org>,
	Ben Segall <bsegall@google.com>,  Mel Gorman <mgorman@suse.de>,
	Valentin Schneider <vschneid@redhat.com>,
	 "Paul E. McKenney" <paulmck@kernel.org>,
	 Frederic Weisbecker <frederic@kernel.org>,
	 Neeraj Upadhyay <neeraj.upadhyay@kernel.org>,
	 Joel Fernandes <joelagnelf@nvidia.com>,
	 Josh Triplett <josh@joshtriplett.org>,
	Boqun Feng <boqun@kernel.org>,
	 Uladzislau Rezki <urezki@gmail.com>,
	 Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
	 Lai Jiangshan <jiangshanlai@gmail.com>,
	Zqiang <qiang.zhang@linux.dev>,
	 Anna-Maria Behnsen <anna-maria@linutronix.de>,
	Tejun Heo <tj@kernel.org>,  Jonathan Corbet <corbet@lwn.net>,
	Shuah Khan <skhan@linuxfoundation.org>,
	 Shuah Khan <shuah@kernel.org>, Thomas Gleixner <tglx@kernel.org>
Cc: Waiman Long <longman@redhat.com>,
	linux-kernel@vger.kernel.org,  rcu@vger.kernel.org,
	cgroups@vger.kernel.org, linux-doc@vger.kernel.org,
	 linux-kselftest@vger.kernel.org,
	Qiliang Yuan <odys.yuan@gmail.com>
Subject: [PATCH v5 01/12] sched/isolation: Enforce nohz_full as a subset of isolcpus=domain at boot
Date: Fri, 02 Oct 2026 21:10:21 +0800	[thread overview]
Message-ID: <20261002-wujing-dhm-v5-1-78a6996d87ad@gmail.com> (raw)
In-Reply-To: <20261002-wujing-dhm-v5-0-78a6996d87ad@gmail.com>

HK_TYPE_KERNEL_NOISE and HK_TYPE_DOMAIN are configured independently
when nohz_full=/isolcpus=nohz and isolcpus=domain are passed as
separate boot parameters, or when nohz_full=/isolcpus=nohz is passed
without isolcpus=domain at all.  Nothing stops a CPU from ending up
tick-suppressed (nohz_full) while still scheduled as part of the
normal, non-isolated sched domain, which defeats the point of
isolating it from kernel noise in the first place.

A CPU with the tick stopped must always be excluded from the normal
scheduler domain: HK_TYPE_KERNEL_NOISE's housekeeping set has to stay
a superset of HK_TYPE_DOMAIN's.  Checking this while __setup()
parameters are still being parsed is order-dependent: rejecting
nohz_full= the moment it is seen, before a later isolcpus=domain on
the same command line has been parsed yet, would discard a
perfectly valid combination just because of argument order.

Check the invariant once in housekeeping_init() instead, which runs
after every __setup() cmdline parameter has been parsed regardless of
order.  Disable HK_TYPE_KERNEL_NOISE rather than panicking or leaving
the inconsistency in place: this gives the same end state as not
having passed nohz_full=/isolcpus=nohz at all.

housekeeping_cpumask() only dereferences the real per-type masks once
housekeeping_overridden is enabled; before that every call returns
cpu_possible_mask regardless of housekeeping.flags.  Enable the static
key before the subset check runs, not after: checking first would
compare cpu_possible_mask against itself for both sides and never
reject anything.

Signed-off-by: Qiliang Yuan <odys.yuan@gmail.com>
---
 Documentation/admin-guide/kernel-parameters.txt | 12 ++++++++++++
 kernel/sched/isolation.c                        | 24 ++++++++++++++++++++++++
 2 files changed, 36 insertions(+)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index e75344f4e0cde..cd4fb6d752a6c 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2810,6 +2810,11 @@ Kernel parameters
 			  so to protect individual CPUs the 'cpumask' file has to
 			  be configured manually after bootup.
 
+			  When 'domain' is configured through a separate
+			  isolcpus= or nohz_full= invocation, every 'nohz'
+			  CPU must also be a 'domain' CPU; a combination that
+			  violates this is rejected at boot with a warning.
+
 			domain
 			  Isolate from the general SMP balancing and scheduling
 			  algorithms. Note that performing domain isolation this way
@@ -4564,6 +4569,13 @@ Kernel parameters
 			Note that this argument takes precedence over
 			the CONFIG_RCU_NOCB_CPU_DEFAULT_ALL option.
 
+			When isolcpus=domain is also given, every CPU in
+			this list (or in isolcpus=nohz) must also be in
+			the isolcpus=domain list: a tick-suppressed CPU
+			must always be excluded from the normal scheduler
+			domain.  A combination that violates this is
+			rejected at boot with a warning.
+
 	noinitrd	[Deprecated,RAM] Tells the kernel not to load any configured
 			initial RAM disk. Currently this parameter applies to
 			initrd only, not to initramfs. But it applies to both
diff --git a/kernel/sched/isolation.c b/kernel/sched/isolation.c
index 156025ef81b75..c6a41095a9002 100644
--- a/kernel/sched/isolation.c
+++ b/kernel/sched/isolation.c
@@ -171,8 +171,32 @@ void __init housekeeping_init(void)
 	if (!housekeeping.flags)
 		return;
 
+	/*
+	 * housekeeping_cpumask() only dereferences the real per-type masks
+	 * once housekeeping_overridden is live; before that it always
+	 * returns cpu_possible_mask regardless of housekeeping.flags, which
+	 * would make the subset check below vacuously pass for every type.
+	 * Enable it first so the check actually sees the parsed masks.
+	 */
 	static_branch_enable(&housekeeping_overridden);
 
+	/*
+	 * A nohz_full CPU must always run on an isolated sched domain:
+	 * reject nohz_full=/isolcpus=nohz unless isolcpus=domain covers
+	 * at least the same CPUs.  Checked here, after all __setup()
+	 * cmdline parsing has run, so the outcome does not depend on
+	 * which of the two parameters came first on the command line.
+	 */
+	if ((housekeeping.flags & HK_FLAG_KERNEL_NOISE) &&
+	    !cpumask_subset(housekeeping_cpumask(HK_TYPE_DOMAIN),
+			    housekeeping_cpumask(HK_TYPE_KERNEL_NOISE))) {
+		pr_warn("Housekeeping: nohz_full=/isolcpus=nohz must be a subset "
+			"of isolcpus=domain, disabling nohz_full\n");
+		housekeeping.flags &= ~HK_FLAG_KERNEL_NOISE;
+		if (!housekeeping.flags)
+			return;
+	}
+
 	if (housekeeping.flags & HK_FLAG_KERNEL_NOISE)
 		sched_tick_offload_init();
 	/*

-- 
2.43.0


  reply	other threads:[~2026-10-02 13:10 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-02 13:10 [PATCH v5 00/12] Dynamic Housekeeping Management (DHM) via CPUSets Qiliang Yuan
2026-10-02 13:10 ` Qiliang Yuan [this message]
2026-10-02 13:10 ` [PATCH v5 02/12] sched/isolation: Add runtime housekeeping mask updates with boot snapshots Qiliang Yuan
2026-10-02 13:10 ` [PATCH v5 03/12] sched/isolation: RCU-protect runtime-mutable housekeeping cpumask readers Qiliang Yuan
2026-10-02 13:10 ` [PATCH v5 04/12] cpuset: Drive kernel-noise housekeeping from isolated partitions Qiliang Yuan
2026-10-02 13:10 ` [PATCH v5 05/12] context_tracking: Allow runtime per-CPU user tracking enable/disable Qiliang Yuan
2026-10-02 13:10 ` [PATCH v5 06/12] rcu/nocb: Support lazy init for runtime CPU isolation Qiliang Yuan
2026-10-02 13:10 ` [PATCH v5 07/12] watchdog: Sync watchdog_cpumask with HK_TYPE_KERNEL_NOISE on isolation Qiliang Yuan
2026-10-02 15:26   ` Bradley Morgan
2026-10-02 13:10 ` [PATCH v5 08/12] tick/nohz: Derive full-dynticks state from HK_TYPE_KERNEL_NOISE Qiliang Yuan
2026-10-02 13:10 ` [PATCH v5 09/12] cpuset: Add dhm_cycling_cpus mask to suppress transient invalidation Qiliang Yuan
2026-10-02 13:10 ` [PATCH v5 10/12] cpuset: Drive kernel-noise isolation via per-CPU hotplug cycling Qiliang Yuan
2026-10-02 13:10 ` [PATCH v5 11/12] docs: cgroup-v2: Document kernel-noise isolation via isolated partitions Qiliang Yuan
2026-10-02 13:10 ` [PATCH v5 12/12] selftests/cgroup: Add kernel-noise isolation test to cpuset selftest Qiliang Yuan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261002-wujing-dhm-v5-1-78a6996d87ad@gmail.com \
    --to=odys.yuan@gmail.com \
    --cc=anna-maria@linutronix.de \
    --cc=boqun@kernel.org \
    --cc=bsegall@google.com \
    --cc=cgroups@vger.kernel.org \
    --cc=corbet@lwn.net \
    --cc=dietmar.eggemann@arm.com \
    --cc=frederic@kernel.org \
    --cc=jiangshanlai@gmail.com \
    --cc=joelagnelf@nvidia.com \
    --cc=josh@joshtriplett.org \
    --cc=juri.lelli@redhat.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=longman@redhat.com \
    --cc=mathieu.desnoyers@efficios.com \
    --cc=mgorman@suse.de \
    --cc=mingo@redhat.com \
    --cc=neeraj.upadhyay@kernel.org \
    --cc=paulmck@kernel.org \
    --cc=peterz@infradead.org \
    --cc=qiang.zhang@linux.dev \
    --cc=rcu@vger.kernel.org \
    --cc=rostedt@goodmis.org \
    --cc=shuah@kernel.org \
    --cc=skhan@linuxfoundation.org \
    --cc=tglx@kernel.org \
    --cc=tj@kernel.org \
    --cc=urezki@gmail.com \
    --cc=vincent.guittot@linaro.org \
    --cc=vschneid@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®