From: Myeonghun Pak <mhun512@gmail.com>
To: Ioana Ciornei <ioana.ciornei@nxp.com>,
Christophe Leroy <chleroy@kernel.org>
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org,
Ijae Kim <ae878000@gmail.com>,
mhun512@gmail.com, stable@vger.kernel.org
Subject: [PATCH v2 2/2] soc: fsl: dpio: Free the IRQ before releasing the I/O object
Date: Fri, 2 Oct 2026 15:48:02 -0400 [thread overview]
Message-ID: <20261002194802.375497-3-mhun512@gmail.com> (raw)
In-Reply-To: <20261002194802.375497-1-mhun512@gmail.com>
The DPIO interrupt handler accesses priv->io, but dpaa2_dpio_remove()
releases that object before tearing down the interrupts. The IRQ was
requested with devm_request_irq(), and unregister_dpio_irq_handlers()
only clears its affinity hint. fsl_mc_free_irqs() returns IRQ resources
to the MC resource pool without freeing the handler. An interrupt can
therefore access the freed I/O object before devres releases the IRQ.
Explicitly free the managed IRQ in unregister_dpio_irq_handlers() before
returning its resource to the pool, and perform IRQ teardown before
releasing the I/O object. This also waits for an in-flight handler while
the object is still valid.
This issue was identified during our ongoing static-analysis research
while reviewing kernel code.
Fixes: 993fec7e11ca ("bus: fsl-mc: dpio: add the DPAA2 DPIO object driver")
Cc: stable@vger.kernel.org
Assisted-by: LLM
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
---
Changes in v2:
- Move devm_free_irq() into unregister_dpio_irq_handlers(), as suggested
by Ioana Ciornei, to keep IRQ registration and unregistration in sync.
- Base this patch on the probe cleanup fix in patch 1, which removes the
unregister call from the probe error path.
- Add Cc: stable@vger.kernel.org.
drivers/soc/fsl/dpio/dpio-driver.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/fsl/dpio/dpio-driver.c b/drivers/soc/fsl/dpio/dpio-driver.c
index 8d31346..d8f28fb 100644
--- a/drivers/soc/fsl/dpio/dpio-driver.c
+++ b/drivers/soc/fsl/dpio/dpio-driver.c
@@ -88,6 +88,7 @@ static void unregister_dpio_irq_handlers(struct fsl_mc_device *dpio_dev)
/* clear the affinity hint */
irq_set_affinity_hint(irq->virq, NULL);
+ devm_free_irq(&dpio_dev->dev, irq->virq, &dpio_dev->dev);
}
static int register_dpio_irq_handlers(struct fsl_mc_device *dpio_dev, int cpu)
@@ -276,10 +277,10 @@ static void dpaa2_dpio_remove(struct fsl_mc_device *dpio_dev)
priv = dev_get_drvdata(dev);
cpu = dpaa2_io_get_cpu(priv->io);
- dpaa2_io_down(priv->io);
-
dpio_teardown_irqs(dpio_dev);
+ dpaa2_io_down(priv->io);
+
cpumask_set_cpu(cpu, cpus_unused_mask);
err = dpio_open(dpio_dev->mc_io, 0, dpio_dev->obj_desc.id,
--
2.53.0
prev parent reply other threads:[~2026-10-02 19:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-02 19:48 [PATCH v2 0/2] soc: fsl: dpio: Fix IRQ cleanup during probe and removal Myeonghun Pak
2026-10-02 19:48 ` [PATCH v2 1/2] soc: fsl: dpio: Fix cleanup on IRQ registration failure Myeonghun Pak
2026-10-02 19:48 ` Myeonghun Pak [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261002194802.375497-3-mhun512@gmail.com \
--to=mhun512@gmail.com \
--cc=ae878000@gmail.com \
--cc=chleroy@kernel.org \
--cc=ioana.ciornei@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®