From: Billy Tsai <billy_tsai@aspeedtech.com>
To: "Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Joel Stanley" <joel@jms.id.au>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Ryan Chen" <ryan_chen@aspeedtech.com>
Cc: <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
Billy Tsai <billy_tsai@aspeedtech.com>,
Jonathan Cameron <jic23@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: [PATCH v3 0/3] iio: adc: aspeed: Fix SCU lookup for multi-SCU AST2700
Date: Mon, 5 Oct 2026 18:22:52 +0800 [thread overview]
Message-ID: <20261005-ast27xx-adc-upstream-v3-0-ef25552d3a59@aspeedtech.com> (raw)
The ADC's reference-voltage trimming data lives in a SCU register. The
driver has always located that SCU with a global, name-based
device-tree search, which works as long as a platform only has a
single node named "syscon". AST2700 splits its SCU into two
instances, syscon0 and syscon1, that share that same node name and
differ only by label and unit address, so the lookup always resolves
to syscon0 even when the ADC's trimming data lives in syscon1.
This series adds an explicit "aspeed,trim-syscon" phandle property so multi-SCU
platforms can point the ADC at the right SCU, keeps the existing
global lookup as a fallback for single-SCU platforms and already
deployed device trees, and wires the new property up on AST2700.
Patch summary:
1. dt-bindings: iio: adc: Add syscon property for multi-SCU SoCs
2. iio: adc: aspeed: Use syscon phandle for trimming data when available
3. arm64: dts: aspeed: Add syscon phandle to AST2700 ADC nodes
Assisted-by: LLM
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
Changes in v3:
- Switch the LLM attribution trailer to "Assisted-by: LLM", the format
required by Documentation/process/coding-assistants.rst, instead of
naming the specific tool/model
- Move each patch's Signed-off-by to be the last trailer, after
Assisted-by
- In patch 2, use dev_of_node() instead of dereferencing
data->dev->of_node, and check the new property with
of_property_present() before calling the non-optional
syscon_regmap_lookup_by_phandle()
- Link to v2: https://lore.kernel.org/r/20261001-ast27xx-adc-upstream-v2-0-2f9c15cc0064@aspeedtech.com
Changes in v2:
- Rename the new property to "aspeed,trim-syscon": a bare "syscon" is
not a generic property per writing-bindings.rst, so follow its
vendor,type-syscon convention
- Reword the property's description to state its purpose instead of
restating the schema's required condition in prose
- Drop the extra AST2700 example added for the one new property
- Link to v1: https://lore.kernel.org/r/20261001-ast27xx-adc-upstream-v1-0-5ace57533418@aspeedtech.com
---
Billy Tsai (3):
dt-bindings: iio: adc: Add syscon property for multi-SCU SoCs
iio: adc: aspeed: Use syscon phandle for trimming data when available
arm64: dts: aspeed: Add syscon phandle to AST2700 ADC nodes
.../bindings/iio/adc/aspeed,ast2600-adc.yaml | 17 +++++++++++++++
arch/arm64/boot/dts/aspeed/aspeed-g7-soc1.dtsi | 2 ++
drivers/iio/adc/aspeed_adc.c | 25 ++++++++++++++++------
3 files changed, 37 insertions(+), 7 deletions(-)
---
base-commit: a3b3580713f3ac5a32dc2874ee546828977a1d68
change-id: 20261001-ast27xx-adc-upstream-34b3d9e8e27b
Best regards,
--
Billy Tsai <billy_tsai@aspeedtech.com>
next reply other threads:[~2026-10-05 10:23 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-05 10:22 Billy Tsai [this message]
2026-10-05 10:22 ` [PATCH v3 1/3] dt-bindings: iio: adc: Add syscon property for multi-SCU SoCs Billy Tsai
2026-10-05 10:22 ` [PATCH v3 2/3] iio: adc: aspeed: Use syscon phandle for trimming data when available Billy Tsai
2026-10-05 10:22 ` [PATCH v3 3/3] arm64: dts: aspeed: Add syscon phandle to AST2700 ADC nodes Billy Tsai
2026-10-18 22:56 ` [PATCH v3 0/3] iio: adc: aspeed: Fix SCU lookup for multi-SCU AST2700 Jonathan Cameron
2026-10-21 1:51 ` 回覆: " Billy Tsai
2026-10-21 18:42 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261005-ast27xx-adc-upstream-v3-0-ef25552d3a59@aspeedtech.com \
--to=billy_tsai@aspeedtech.com \
--cc=andrew@codeconstruct.com.au \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
--cc=ryan_chen@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®