[PATCH v7 2/8] Bluetooth: hci_qca: Rename 'power_ctrl_enabled' to 'bt_en_available'

[Loic Poulain <loic.poulain@oss.qualcomm.com>]

From: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>

'power_ctrl_enabled' flag is used to indicate the availability of the BT_EN
GPIO in devicetree. But the naming causes confusion with the new pwrctrl
framework.

So rename it to 'bt_en_available' to make it clear and explicit.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Tested-by: Wei Deng <wei.deng@oss.qualcomm.com>
---
 drivers/bluetooth/hci_qca.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index e249fc6e44479142e25af4e37bc4e1bdba13cd98..f53f95601693dcd8356b4b825776317061050f1b 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -2402,7 +2402,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 	struct hci_dev *hdev;
 	const struct qca_device_data *data;
 	int err;
-	bool power_ctrl_enabled = true;
+	bool bt_en_available = true;
 
 	qcadev = devm_kzalloc(&serdev->dev, sizeof(*qcadev), GFP_KERNEL);
 	if (!qcadev)
@@ -2510,7 +2510,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 		    (data->soc_type == QCA_WCN6750 ||
 		     data->soc_type == QCA_WCN6855 ||
 		     data->soc_type == QCA_WCN7850))
-			power_ctrl_enabled = false;
+			bt_en_available = false;
 
 		qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
 					       GPIOD_IN);
@@ -2548,7 +2548,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 		}
 
 		if (!qcadev->bt_en)
-			power_ctrl_enabled = false;
+			bt_en_available = false;
 
 		qcadev->susclk = devm_clk_get_optional_enabled_with_rate(
 					&serdev->dev, NULL, SUSCLK_RATE_32KHZ);
@@ -2566,7 +2566,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 
 	hdev = qcadev->serdev_hu.hdev;
 
-	if (power_ctrl_enabled) {
+	if (bt_en_available) {
 		hci_set_quirk(hdev, HCI_QUIRK_NON_PERSISTENT_SETUP);
 		hdev->shutdown = qca_hci_shutdown;
 	}

-- 
2.34.1