From: kernel test robot <lkp@intel.com>
To: Vyacheslav Yurkov via B4 Relay
<devnull+V.Yurkov.EXT.bruker.com@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: llvm@lists.linux.dev, oe-kbuild-all@lists.linux.dev,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Vyacheslav Yurkov <V.Yurkov.EXT@bruker.com>
Subject: Re: [PATCH 2/2] bus: add Altera timeout bridge driver
Date: Mon, 5 Oct 2026 04:01:13 +0800 [thread overview]
Message-ID: <202610050325.ZOPvf8XR-lkp@intel.com> (raw)
In-Reply-To: <20261003-feature-timeout-ip-v1-2-8837c311d571@bruker.com>
Hi Vyacheslav,
kernel test robot noticed the following build errors:
[auto build test ERROR on a74306e2e676f9775457366fc047a660fbf02f26]
url: https://github.com/intel-lab-lkp/linux/commits/Vyacheslav-Yurkov-via-B4-Relay/dt-bindings-bus-Add-binding-for-Altera-AXI-Timeout-Bridge/20261003-201919
base: a74306e2e676f9775457366fc047a660fbf02f26
patch link: https://lore.kernel.org/r/20261003-feature-timeout-ip-v1-2-8837c311d571%40bruker.com
patch subject: [PATCH 2/2] bus: add Altera timeout bridge driver
config: s390-allmodconfig (https://download.01.org/0day-ci/archive/20261005/202610050325.ZOPvf8XR-lkp@intel.com/config)
compiler: clang version 24.0.0git (https://github.com/llvm/llvm-project 5f609f950d2e80addf5566623013db68394334db)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20261005/202610050325.ZOPvf8XR-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202610050325.ZOPvf8XR-lkp@intel.com/
All error/warnings (new ones prefixed by >>):
>> drivers/bus/altera-timeout-bridge.c:60:11: error: call to undeclared function 'readl'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
60 | result = readl(driver_data->bridge_registers + offset);
| ^
>> drivers/bus/altera-timeout-bridge.c:69:2: error: call to undeclared function 'writel'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
69 | writel(value, driver_data->bridge_registers + offset);
| ^
>> drivers/bus/altera-timeout-bridge.c:187:38: warning: cast from 'void (*)(struct kernfs_node *)' to 'void (*)(void *)' converts to incompatible function type [-Wcast-function-type-strict]
187 | ret = devm_add_action_or_reset(dev, (void (*)(void *))sysfs_put, driver_data->irq_node);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/device/devres.h:181:34: note: expanded from macro 'devm_add_action_or_reset'
181 | __devm_add_action_or_reset(dev, action, data, #action)
| ^~~~~~
1 warning and 2 errors generated.
vim +/readl +60 drivers/bus/altera-timeout-bridge.c
53
54 static u32
55 bridge_reg_read(struct altera_timeout_bridge_data *driver_data,
56 u32 offset)
57 {
58 u32 result;
59
> 60 result = readl(driver_data->bridge_registers + offset);
61
62 return result;
63 }
64
65 static void bridge_reg_write(
66 struct altera_timeout_bridge_data *driver_data,
67 int offset, u32 value)
68 {
> 69 writel(value, driver_data->bridge_registers + offset);
70 }
71
72 static irqreturn_t altera_timeout_bridge_isr(int irq, void *data)
73 {
74 struct altera_timeout_bridge_data *driver_data = data;
75 u32 timed_out_address;
76 resource_size_t effective_base_address;
77 resource_size_t effective_timed_out_address;
78
79 atomic_inc(&driver_data->irq_count);
80
81 // Read and print the timed-out address (encoded in the lower nibble
82 // 0x8..0xF according to AXI Timeout Bridge IP (CSR Interrupt Status Information)
83 timed_out_address = bridge_reg_read(
84 driver_data,
85 ALTERA_TIMEOUT_BRIDGE_REG_TIMED_OUT_ADDRESS);
86 effective_base_address = driver_data->bridge_register_resource->start;
87 effective_timed_out_address = effective_base_address + timed_out_address;
88 pr_err("%s: timeout at address 0x%llx\n",
89 __func__, (unsigned long long)effective_timed_out_address);
90
91 // Reset IRQ status in the bridge
92 bridge_reg_write(
93 driver_data,
94 ALTERA_TIMEOUT_BRIDGE_REG_IRQ_STATUS_RESET,
95 0x1);
96 // notify the user space
97 sysfs_notify_dirent(driver_data->irq_node);
98
99 return IRQ_HANDLED;
100 }
101 static int altera_timeout_bridge_probe(struct platform_device *pdev)
102 {
103 struct device *dev = &pdev->dev;
104 const struct of_device_id *match;
105 const struct of_dev_auxdata *lookup = dev_get_platdata(dev);
106 struct device_node *np = dev->of_node;
107 struct altera_timeout_bridge_data *driver_data;
108 int ret = 0;
109 int irq = -1;
110
111 /*
112 * Allow user to use driver_override to bind this driver to a
113 * transparent bus device which has a different compatible string
114 * that's not listed in simple_pm_bus_of_match. We don't want to do any
115 * of the simple-pm-bus tasks for these devices, so return early.
116 */
117 if (device_has_driver_override(&pdev->dev))
118 return 0;
119
120 match = of_match_device(dev->driver->of_match_table, dev);
121
122 /* Use a fall back logic like in simple-pm-bus */
123 if (match && match->data) {
124 if (of_property_match_string(np, "compatible", match->compatible) == 0)
125 return 0;
126 else
127 return -ENODEV;
128 }
129
130 driver_data =
131 devm_kzalloc(&pdev->dev, sizeof(*driver_data), GFP_KERNEL);
132 if (!driver_data) {
133 dev_err(&pdev->dev,
134 "%s: kzalloc failed: no memory for the driver's data, returning ENOMEM\n",
135 __func__);
136 return -ENOMEM;
137 }
138
139 driver_data->dev = dev;
140 platform_set_drvdata(pdev, driver_data);
141
142 driver_data->bridge_register_resource =
143 platform_get_resource(pdev, IORESOURCE_MEM, 0);
144 if (!driver_data->bridge_register_resource) {
145 dev_err(dev,
146 "%s: missing required reg binding\n",
147 __func__);
148 return -ENOENT;
149 }
150 driver_data->bridge_registers =
151 devm_ioremap_resource(dev,
152 driver_data->bridge_register_resource);
153 if (IS_ERR(driver_data->bridge_registers)) {
154 dev_err(dev,
155 "%s: ioremap_resource failed for bridge-status MMIO, returning PTR_ERR(%ld)\n",
156 __func__, PTR_ERR(driver_data->bridge_registers));
157 return PTR_ERR(driver_data->bridge_registers);
158 }
159
160 irq = platform_get_irq(pdev, 0);
161 if (irq < 0) {
162 dev_err(dev,
163 "%s: platform_get_irq failed: %d\n", __func__, irq);
164 return irq;
165 }
166
167 ret = devm_request_irq(dev, irq,
168 altera_timeout_bridge_isr,
169 0,
170 dev_name(dev),
171 driver_data);
172 if (ret) {
173 dev_err(dev,
174 "%s: devm_request_irq failed for IRQ %d: %d\n",
175 __func__, irq, ret);
176 return ret;
177 }
178
179 ret = devm_device_add_group(dev, &altera_timeout_bridge_sysfs_group);
180 if (ret)
181 return ret;
182
183 driver_data->irq_node = sysfs_get_dirent(dev->kobj.sd, "timeout_irq");
184 if (!driver_data->irq_node)
185 return -ENOENT;
186
> 187 ret = devm_add_action_or_reset(dev, (void (*)(void *))sysfs_put, driver_data->irq_node);
188 if (ret)
189 return ret;
190
191 if (np)
192 of_platform_populate(np, NULL, lookup, &pdev->dev);
193
194 return 0;
195 }
196
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
prev parent reply other threads:[~2026-10-04 20:01 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-03 20:19 [PATCH 0/2] Add " Vyacheslav Yurkov via B4 Relay
2026-10-03 20:19 ` [PATCH 1/2] dt-bindings: bus: Add binding for Altera AXI Timeout Bridge Vyacheslav Yurkov via B4 Relay
2026-10-03 21:18 ` Krzysztof Kozlowski
2026-10-03 20:19 ` [PATCH 2/2] bus: add Altera timeout bridge driver Vyacheslav Yurkov via B4 Relay
2026-10-03 21:24 ` Krzysztof Kozlowski
2026-10-04 20:01 ` kernel test robot [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202610050325.ZOPvf8XR-lkp@intel.com \
--to=lkp@intel.com \
--cc=V.Yurkov.EXT@bruker.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=devnull+V.Yurkov.EXT.bruker.com@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=llvm@lists.linux.dev \
--cc=oe-kbuild-all@lists.linux.dev \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®