From: Mehmet Fide <mehmet.fide@gmail.com>
To: "Toke Høiland-Jørgensen" <toke@toke.dk>
Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com>,
linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
mehmet.fide@screeningeagle.com
Subject: [PATCH ath-current 1/2] wifi: ath9k_htc: do not start ANI before the first channel is set
Date: Mon, 5 Oct 2026 09:22:08 +0200 [thread overview]
Message-ID: <20261005072209.4101009-2-mehmet.fide@gmail.com> (raw)
In-Reply-To: <20261005072209.4101009-1-mehmet.fide@gmail.com>
From: Mehmet Fide <mehmet.fide@screeningeagle.com>
ath9k_htc_add_interface() starts ANI for the first AP interface, before
any channel is configured. The per-channel calibration data only gets
attached by the first ath9k_htc_set_channel() that is not a fast
channel change, and that same call cancels the ANI work a few
milliseconds after add_interface, so normally the work never runs.
When the bring-up stalls for more than the 100 ms ANI poll interval in
between, it does run, and ar9002_hw_per_calibration() records the IQ
calibration result in the calibration data that does not exist yet:
Unable to handle kernel NULL pointer dereference at virtual address
00000008
PC is at ar9002_hw_calibrate+0x1f8/0x570 [ath9k_hw]
Workqueue: phy0 ath9k_htc_ani_work [ath9k_htc]
Seen about once per thousand AP starts with an AR9271 on a Cortex-A5
board that starts hostapd while still booting; a 500 ms delay after
add_interface reproduces it on every start. The crashed work never
completes, so the next cancel_delayed_work_sync() blocks for good.
Drop the start; it has nothing to calibrate against and is cancelled
anyway. The TSF adjust bit that shared its condition is now set for
every AP interface, which is harmless: the next reset applies it. The
next patch starts ANI once the interface beacons.
Fixes: a236254c35f0 ("ath9k_htc: Add ANI for AP mode")
Cc: stable@vger.kernel.org
Signed-off-by: Mehmet Fide <mehmet.fide@screeningeagle.com>
---
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 0d6272ac0dac..a86dd28b0ab7 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1098,11 +1098,8 @@ static int ath9k_htc_add_interface(struct ieee80211_hw *hw,
ath9k_htc_set_opmode(priv);
- if ((priv->ah->opmode == NL80211_IFTYPE_AP) &&
- !test_bit(ATH_OP_ANI_RUN, &common->op_flags)) {
+ if (priv->ah->opmode == NL80211_IFTYPE_AP)
ath9k_hw_set_tsfadjust(priv->ah, true);
- ath9k_htc_start_ani(priv);
- }
ath_dbg(common, CONFIG, "Attach a VIF of type: %d at idx: %d\n",
vif->type, avp->index);
--
2.55.0
next prev parent reply other threads:[~2026-10-05 7:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-05 7:22 [PATCH ath-current 0/2] wifi: ath9k_htc: start ANI for an AP interface at the right time Mehmet Fide
2026-10-05 7:22 ` Mehmet Fide [this message]
2026-10-05 7:22 ` [PATCH ath-current 2/2] wifi: ath9k_htc: start ANI when an AP interface begins to beacon Mehmet Fide
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261005072209.4101009-2-mehmet.fide@gmail.com \
--to=mehmet.fide@gmail.com \
--cc=jeff.johnson@oss.qualcomm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=mehmet.fide@screeningeagle.com \
--cc=toke@toke.dk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®