From: Francesco Dolcini <francesco@dolcini.it>
To: Francesco Dolcini <francesco@dolcini.it>,
Andrzej Hajda <andrzej.hajda@intel.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Robert Foss <rfoss@kernel.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Luca Ceresoli <luca.ceresoli@bootlin.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>
Cc: Francesco Dolcini <francesco.dolcini@toradex.com>,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/4] drm/bridge: Add Thine THC63LVD827 LVDS encoder and 10inch LVDS panel on Colibri iMX7
Date: Mon, 5 Oct 2026 11:50:00 +0200 [thread overview]
Message-ID: <20261005095006.20290-1-francesco@dolcini.it> (raw)
From: Francesco Dolcini <francesco.dolcini@toradex.com>
This series adds support for the Thine THC63LVD827 DPI to LVDS encoder and
afterward uses it to add DT overlays to enable the Toradex 10inch LVDS panel
on Colibri iMX6ULL / iMX7 with the Iris v2 carrier board.
v2:
- address review comment on the binding (Frank), document the power
supplies
- driver: add power supplies support, enforce the input sampling edge
via atomic_check, use bridge.next_bridge with
of_drm_get_bridge_by_endpoint(), drop unused code
- move the common part of the Colibri iMX7 overlay to a dtsi shared
between Colibri iMX6ULL and iMX7, minor cleanups to the overlay and
the Makefile
- new patch adding the Colibri iMX6ULL overlay
v1: https://lore.kernel.org/all/20260908100230.83796-1-francesco@dolcini.it/
Francesco Dolcini (4):
dt-bindings: display: bridge: Add THine THC63LVD827
drm/bridge: Add THine THC63LVD827 LVDS encoder
ARM: dts: imx7d-colibri-emmc: Add Toradex Capacitive Touch Display 10"
LVDS
ARM: dts: imx6ull-colibri-emmc: Add Toradex Capacitive Touch Display
10" LVDS
.../display/bridge/thine,thc63lvd827.yaml | 138 +++++++++++
MAINTAINERS | 6 +
arch/arm/boot/dts/nxp/imx/Makefile | 13 +
...emmc-iris-panel-cap-touch-10inch-lvds.dtso | 49 ++++
...ibri-iris-panel-cap-touch-10inch-lvds.dtsi | 70 ++++++
...emmc-iris-panel-cap-touch-10inch-lvds.dtso | 47 ++++
drivers/gpu/drm/bridge/Kconfig | 11 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/thc63lvd827.c | 228 ++++++++++++++++++
9 files changed, 563 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd827.yaml
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris-panel-cap-touch-10inch-lvds.dtso
create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-imx7-colibri-iris-panel-cap-touch-10inch-lvds.dtsi
create mode 100644 arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris-panel-cap-touch-10inch-lvds.dtso
create mode 100644 drivers/gpu/drm/bridge/thc63lvd827.c
--
2.47.3
next reply other threads:[~2026-10-05 9:50 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-05 9:50 Francesco Dolcini [this message]
2026-10-05 9:50 ` [PATCH v2 1/4] dt-bindings: display: bridge: Add THine THC63LVD827 Francesco Dolcini
2026-10-05 10:52 ` Conor Dooley
2026-10-05 9:50 ` [PATCH v2 2/4] drm/bridge: Add THine THC63LVD827 LVDS encoder Francesco Dolcini
2026-10-05 9:50 ` [PATCH v2 3/4] ARM: dts: imx7d-colibri-emmc: Add Toradex Capacitive Touch Display 10" LVDS Francesco Dolcini
2026-10-05 9:50 ` [PATCH v2 4/4] ARM: dts: imx6ull-colibri-emmc: " Francesco Dolcini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261005095006.20290-1-francesco@dolcini.it \
--to=francesco@dolcini.it \
--cc=Frank.Li@nxp.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=airlied@gmail.com \
--cc=andrzej.hajda@intel.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=festevam@gmail.com \
--cc=francesco.dolcini@toradex.com \
--cc=imx@lists.linux.dev \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luca.ceresoli@bootlin.com \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®