From: Tejun Heo <tj@kernel.org>
To: sched-ext@lists.linux.dev
Cc: David Vernet <void@manifault.com>,
Andrea Righi <arighi@nvidia.com>,
Changwoo Min <changwoo@igalia.com>,
Emil Tsalapatis <emil@etsalapatis.com>,
David Dai <david.dai@linux.dev>,
linux-kernel@vger.kernel.org, Tejun Heo <tj@kernel.org>
Subject: [PATCH 3/3] sched_ext: scx_qmap: Show actual cid use per participant
Date: Mon, 5 Oct 2026 07:55:20 -1000 [thread overview]
Message-ID: <20261005175520.2756986-4-tj@kernel.org> (raw)
In-Reply-To: <20261005175520.2756986-1-tj@kernel.org>
qmap's hier stats show how much cid-time the partition handed each
participant, not how much of it was used. Track the sched running on each
cid from ops.sub_cid_sched_updated() and charge the intervals to the
participant, then print the use next to the allocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
---
tools/sched_ext/scx_qmap.bpf.c | 87 ++++++++++++++++++++++++++++++++--
tools/sched_ext/scx_qmap.c | 38 ++++++++++++---
tools/sched_ext/scx_qmap.h | 11 +++++
3 files changed, 127 insertions(+), 9 deletions(-)
diff --git a/tools/sched_ext/scx_qmap.bpf.c b/tools/sched_ext/scx_qmap.bpf.c
index 3566e3e02e21..7f69394556b6 100644
--- a/tools/sched_ext/scx_qmap.bpf.c
+++ b/tools/sched_ext/scx_qmap.bpf.c
@@ -1782,13 +1782,90 @@ static void redistribute(void)
}
/*
- * Userspace pokes this (PROG_RUN) to bring alloc_ns[] current before reading
- * it for the stats display. Skipping when the partition guard is held is
- * fine - alloc_ts is untouched, so the elapsed time is charged next time.
+ * Owner id for a @sched value of ops.sub_cid_sched_updated(). A child is
+ * attached before its first task runs and its tasks are re-homed before it
+ * detaches, so a child's cgroup id always has its slot.
+ */
+static s32 cid_sched_owner(u64 sched)
+{
+ s32 i;
+
+ if (sched == SCX_CID_SCHED_NONE)
+ return CID_NONE;
+ if (sched == SCX_CID_SCHED_SELF)
+ return CID_SELF;
+ bpf_for(i, 0, MAX_SUB_SCHEDS)
+ if (qa.sub_sched_ctxs[i].cgroup_id == sched)
+ return i;
+ return CID_NONE;
+}
+
+/* used_ns[] is summed from every cpu, hence the atomic adds */
+static void cid_sched_charge(s32 cid, u64 now)
+{
+ s32 owner = qa.cid_sched[cid];
+ u64 delta = now - qa.cid_sched_since[cid];
+
+ if (owner >= 0 && owner < MAX_SUB_SCHEDS)
+ __sync_fetch_and_add(&qa.used_ns[owner], delta);
+ else if (owner == CID_SELF)
+ __sync_fetch_and_add(&qa.self_used_ns, delta);
+ qa.cid_sched_since[cid] = now;
+}
+
+void BPF_STRUCT_OPS(qmap_sub_cid_sched_updated, s32 cid, u64 sched)
+{
+ if (cid < 0 || cid >= SCX_QMAP_MAX_CPUS)
+ return;
+
+ cid_sched_charge(cid, bpf_ktime_get_ns());
+ qa.cid_sched[cid] = cid_sched_owner(sched);
+}
+
+/*
+ * Snapshot the used time for the stats display: the closed intervals plus the
+ * ones still open. The reads race the notifications on other cpus, so an
+ * interval closing in between can be missing from one snapshot or counted in
+ * two. The next snapshot evens it out and the display floors a negative
+ * difference at zero.
+ */
+static void snapshot_used(void)
+{
+ u64 now = bpf_ktime_get_ns();
+ s32 nr_cids = qa.nr_cids;
+ s32 cid, i;
+
+ if (nr_cids < 0 || nr_cids > SCX_QMAP_MAX_CPUS)
+ return;
+
+ bpf_for(i, 0, MAX_SUB_SCHEDS)
+ qa.used_snap_ns[i] = qa.used_ns[i];
+ qa.self_used_snap_ns = qa.self_used_ns;
+
+ bpf_for(cid, 0, nr_cids) {
+ s32 owner = qa.cid_sched[cid];
+ u64 since = qa.cid_sched_since[cid];
+
+ /* restarted after @now by a notification on another cpu */
+ if (since > now)
+ continue;
+ if (owner >= 0 && owner < MAX_SUB_SCHEDS)
+ qa.used_snap_ns[owner] += now - since;
+ else if (owner == CID_SELF)
+ qa.self_used_snap_ns += now - since;
+ }
+}
+
+/*
+ * Userspace pokes this (PROG_RUN) to bring alloc_ns[] and the used snapshot
+ * current before reading them for the stats display. Skipping the alloc part
+ * when the partition guard is held is fine - alloc_ts is untouched, so the
+ * elapsed time is charged next time.
*/
SEC("syscall")
int flush_alloc(void *ctx)
{
+ snapshot_used();
if (part_try_start()) {
account_alloc();
part_end();
@@ -1940,6 +2017,9 @@ s32 BPF_STRUCT_OPS_SLEEPABLE(qmap_init)
/* cache the cid count, trusted to be <= SCX_QMAP_MAX_CPUS hereafter */
qa.nr_cids = nr_cids;
+ bpf_for(i, 0, nr_cids)
+ qa.cid_sched[i] = CID_NONE;
+
/* cmasks are embedded in qa, so they only need initializing */
cmask_init(&qa.idle_cids.mask, 0, nr_cids);
cmask_init(&qa.rr_cids.mask, 0, nr_cids);
@@ -2151,6 +2231,7 @@ SCX_OPS_CID_DEFINE(qmap_ops,
.sub_detach = (void *)qmap_sub_detach,
.sub_caps_updated = (void *)qmap_sub_caps_updated,
.sub_ecaps_updated = (void *)qmap_sub_ecaps_updated,
+ .sub_cid_sched_updated = (void *)qmap_sub_cid_sched_updated,
.init_cids = (void *)qmap_init_cids,
.init = (void *)qmap_init,
.exit = (void *)qmap_exit,
diff --git a/tools/sched_ext/scx_qmap.c b/tools/sched_ext/scx_qmap.c
index 96e485c9e877..e83d5e2147dd 100644
--- a/tools/sched_ext/scx_qmap.c
+++ b/tools/sched_ext/scx_qmap.c
@@ -105,6 +105,8 @@ struct hier_prev {
u64 alloc_ns[MAX_SUB_SCHEDS];
u64 self_alloc_ns;
u64 alloc_window_ns;
+ u64 used_snap_ns[MAX_SUB_SCHEDS];
+ u64 self_used_snap_ns;
u64 nr_dsps[MAX_SUB_SCHEDS];
u64 nr_reenq_cap;
u64 nr_reenq_immed;
@@ -159,6 +161,18 @@ static void format_cid_ranges(struct qmap_arena *qa, s32 owner, char *buf, size_
strcpy(buf, "-");
}
+/*
+ * Delta of a cumulative ns counter over the interval, as a fraction of the
+ * interval. The used snapshot can briefly run behind the previous one (see
+ * snapshot_used()), hence the floor.
+ */
+static double delta_ratio(u64 cur, u64 prev, double secs)
+{
+ s64 delta = cur - prev;
+
+ return secs > 0 && delta > 0 ? delta / (secs * 1e9) : 0.0;
+}
+
/* partition summary + one row per sched: weight, cpus, dispatch rate, cids */
static void print_hier(struct qmap_arena *qa, struct hier_prev *prev, u64 own_cgid)
{
@@ -207,15 +221,24 @@ static void print_hier(struct qmap_arena *qa, struct hier_prev *prev, u64 own_cg
prev->nr_inject_attempts = qa->nr_inject_attempts;
prev->nr_rescue_dsp = qa->nr_rescue_dsp;
- printf("hier : %-4s %10s %4s %6s %8s %s\n",
- "", "cgroup", "w", "alloc", "disp/s", "cids");
+ /*
+ * alloc is the cid-time the partition handed each participant, and used
+ * is the cid-time its tasks actually ran, per
+ * ops.sub_cid_sched_updated(). Both are in cpus over the window.
+ */
+ printf("hier : %-4s %10s %4s %6s %6s %8s %s\n",
+ "", "cgroup", "w", "alloc", "used", "disp/s", "cids");
format_cid_ranges(qa, CID_SELF, ranges, sizeof(ranges));
- printf("hier : %-4s %10llu %4u %6.2f %8s %s\n", "self",
+ printf("hier : %-4s %10llu %4u %6.2f %6.2f %8s %s\n", "self",
(unsigned long long)own_cgid, 100,
- secs > 0 ? (qa->self_alloc_ns - prev->self_alloc_ns) / (secs * 1e9) : 0.0,
+ delta_ratio(qa->self_alloc_ns, prev->self_alloc_ns, secs),
+ delta_ratio(qa->self_used_snap_ns, prev->self_used_snap_ns, secs),
"-", ranges);
prev->self_alloc_ns = qa->self_alloc_ns;
+ /* used accrues without a window, so prev moves only with the window */
+ if (secs > 0)
+ prev->self_used_snap_ns = qa->self_used_snap_ns;
for (i = 0; i < MAX_SUB_SCHEDS; i++) {
struct sub_sched_ctx *sc = &qa->sub_sched_ctxs[i];
@@ -225,12 +248,15 @@ static void print_hier(struct qmap_arena *qa, struct hier_prev *prev, u64 own_cg
snprintf(who, sizeof(who), "sub%u", i);
format_cid_ranges(qa, i, ranges, sizeof(ranges));
- printf("hier : %-4s %10llu %4u %6.2f %8.1f %s\n", who,
+ printf("hier : %-4s %10llu %4u %6.2f %6.2f %8.1f %s\n", who,
(unsigned long long)sc->cgroup_id, sc->weight,
- secs > 0 ? (qa->alloc_ns[i] - prev->alloc_ns[i]) / (secs * 1e9) : 0.0,
+ delta_ratio(qa->alloc_ns[i], prev->alloc_ns[i], secs),
+ delta_ratio(qa->used_snap_ns[i], prev->used_snap_ns[i], secs),
secs > 0 ? (sc->nr_dsps - prev->nr_dsps[i]) / secs : 0.0,
ranges);
prev->alloc_ns[i] = qa->alloc_ns[i];
+ if (secs > 0)
+ prev->used_snap_ns[i] = qa->used_snap_ns[i];
prev->nr_dsps[i] = sc->nr_dsps;
}
}
diff --git a/tools/sched_ext/scx_qmap.h b/tools/sched_ext/scx_qmap.h
index 089c5176c4ec..949459d06a18 100644
--- a/tools/sched_ext/scx_qmap.h
+++ b/tools/sched_ext/scx_qmap.h
@@ -163,6 +163,17 @@ struct qmap_arena {
u64 alloc_ts; /* last accounting timestamp */
u64 alloc_window_ns; /* total accounted time, the alloc denominator */
+ /*
+ * The per-cid fields are written only by that cid's notifications and
+ * read by flush_alloc() for the snapshot userspace displays.
+ */
+ s32 cid_sched[SCX_QMAP_MAX_CPUS]; /* per cid: owner id of the sched running there */
+ u64 cid_sched_since[SCX_QMAP_MAX_CPUS]; /* when that last changed */
+ u64 used_ns[MAX_SUB_SCHEDS]; /* per child slot, closed intervals */
+ u64 self_used_ns;
+ u64 used_snap_ns[MAX_SUB_SCHEDS]; /* used_ns[] plus the intervals open at the flush */
+ u64 self_used_snap_ns;
+
/* bpf-internal cmasks (embedded, see struct qmap_cmask) */
struct qmap_cmask self_cids; /* cids this node runs its own tasks on */
struct qmap_cmask avail_cids; /* cids with caps in effect on the cpu */
--
2.55.0
next prev parent reply other threads:[~2026-10-05 17:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-05 17:55 [PATCHSET sched_ext/for-7.4] sched_ext: Add ops.sub_cid_sched_updated() Tejun Heo
2026-10-05 17:55 ` [PATCH 1/3] sched_ext: Add ops.sub_cid_sched_updated() to report the sched running on a cid Tejun Heo
2026-10-05 17:55 ` [PATCH 2/3] sched_ext: scx_qmap: Size the cid range buffer for large machines Tejun Heo
2026-10-05 17:55 ` Tejun Heo [this message]
2026-10-07 0:40 ` [PATCHSET sched_ext/for-7.4] sched_ext: Add ops.sub_cid_sched_updated() Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261005175520.2756986-4-tj@kernel.org \
--to=tj@kernel.org \
--cc=arighi@nvidia.com \
--cc=changwoo@igalia.com \
--cc=david.dai@linux.dev \
--cc=emil@etsalapatis.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sched-ext@lists.linux.dev \
--cc=void@manifault.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®