From: Xu Yilun <yilun.xu@linux.intel.com>
To: x86@kernel.org, linux-coco@lists.linux.dev,
linux-kernel@vger.kernel.org
Cc: Kiryl Shutsemau <kas@kernel.org>,
Rick Edgecombe <rick.p.edgecombe@intel.com>,
Dave Hansen <dave.hansen@linux.intel.com>,
dave.hansen@intel.com, kvm@vger.kernel.org, yilun.xu@intel.com,
yilun.xu@linux.intel.com, xiaoyao.li@intel.com,
sohil.mehta@intel.com, adrian.hunter@intel.com,
kishen.maloor@intel.com, tony.lindgren@linux.intel.com,
peter.fang@intel.com, baolu.lu@linux.intel.com,
zhenzhong.duan@intel.com, chao.gao@intel.com,
artem.bityutskiy@linux.intel.com, nik.borisov@suse.com
Subject: [PATCH v3 2/6] x86/virt/tdx: Configure add-on features on TDX module init
Date: Tue, 06 Oct 2026 01:41:46 +0800 [thread overview]
Message-ID: <20261006-tdx-module-ext-v3-2-db52cb05b918@linux.intel.com> (raw)
In-Reply-To: <20261006-tdx-module-ext-v3-0-db52cb05b918@linux.intel.com>
The TDX architecture identifies some features that are off by default
but can be enabled by the host during TDX module initialization. They
are classified as add-on features because enabling them affects existing
TDX systems: they may change existing feature behavior, or reserve more
memory.
The TDX module extends TDH.SYS.CONFIG with a new register argument to
specify which add-on features to enable. This new argument is a bitmap
that uses the same feature bits as TDX_FEATURES0. Note that Dynamic PAMT
is an exception: although it is an add-on feature, it is controlled via
a legacy, dedicated register argument [1].
The kernel needs to enable these add-on features when it supports them.
Add a get_tdx_usable_addon_features0() helper to return the bitmap of
the add-on features that the module & kernel both support. Initially,
this helper returns 0. It will be updated to return specific feature
bits as full kernel support lands. Pass this bitmap as an argument to
TDH.SYS.CONFIG.
The TDX module requires SEAMCALL leaf version 1 for TDH.SYS.CONFIG when
passing the new bitmap argument. A previous change [2] supports the
versioned SEAMCALL leafs by adding a "version" field in
struct tdx_module_args. Set the version field to 1 if the new bitmap
argument is used to enable any add-on feature, otherwise keep the
version as 0. This retains backward compatibility with older modules
that don't recognize version 1.
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/all/20260904215841.303070-10-rick.p.edgecombe@intel.com/ # [1]
Link: https://lore.kernel.org/all/20260921-seamcall-version-v7-1-cf05fe76b467@linux.intel.com/ # [2]
---
v3:
- Update the stale changlog for bitmap arg of the wrapper (Chao)
- s/get_tdx_addon_features0()/get_tdx_usable_addon_features0() (Tony)
- Collect Reviewed-by tags
v2:
- Don't pass addon_features0 parameter around, get it in the wrappers
(Dave)
- Remove TDH.SYS.UPDATE wrapper (Dave & Rick)
- Drop the changelog section explaining why add-on feature enabling is
needed in this series, as it is a generally understood pattern (Rick)
- Add a note in the changelog that Dynamic PAMT is not enabled via the
new bitmap argument (Rick)
- Add __init tag for get_tdx_addon_features0() (AI nitpicker)
v1:
- Use tdx_module_args.version to assign SEAMCALL leaf versions (Dave)
- Remove DICE specific descriptions (Rick)
- Remove the global var tdx_addon_features0 (Chao)
- Add a Macro to collect kernel supported add-on feature bits (Rick)
- Changelog & code comments change
---
arch/x86/virt/vmx/tdx/tdx.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/x86/virt/vmx/tdx/tdx.c b/arch/x86/virt/vmx/tdx/tdx.c
index b099aa4056f5..f08278a47aff 100644
--- a/arch/x86/virt/vmx/tdx/tdx.c
+++ b/arch/x86/virt/vmx/tdx/tdx.c
@@ -1042,9 +1042,19 @@ struct tdmr_info_pa_array {
DECLARE_FLEX_ARRAY(u64, phys);
};
+/* List all kernel-supported add-on features0 bits here */
+#define TDX_KERNEL_SUPPORTED_ADDON_FEATURES0 (0)
+
+static __init u64 get_tdx_usable_addon_features0(void)
+{
+ return tdx_sysinfo.features.tdx_features0 &
+ TDX_KERNEL_SUPPORTED_ADDON_FEATURES0;
+}
+
static __init int tdx_sys_config(struct tdmr_info_pa_array *tdmr_pa_array,
unsigned int nr_tdmr_pa, u64 global_keyid)
{
+ u64 addon_features0 = get_tdx_usable_addon_features0();
struct tdx_module_args args = {
.rcx = __pa(tdmr_pa_array),
.rdx = nr_tdmr_pa,
@@ -1056,6 +1066,15 @@ static __init int tdx_sys_config(struct tdmr_info_pa_array *tdmr_pa_array,
args.r8 |= TDX_SYS_CONFIG_DYNAMIC_PAMT;
}
+ /*
+ * Use SEAMCALL version 1 that supports add-on features if any are
+ * requested. Otherwise use version 0 for backward compatibility.
+ */
+ if (addon_features0) {
+ args.r9 = addon_features0;
+ args.version = 1;
+ }
+
return seamcall_prerr(TDH_SYS_CONFIG, &args);
}
--
2.25.1
next prev parent reply other threads:[~2026-10-05 17:45 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-05 17:41 [PATCH v3 0/6] Enable TDX module extensions Xu Yilun
2026-10-05 17:41 ` [PATCH v3 1/6] x86/virt/tdx: Move TDH.SYS.CONFIG operations into a wrapper Xu Yilun
2026-10-05 17:41 ` Xu Yilun [this message]
2026-10-05 17:41 ` [PATCH v3 3/6] x86/virt/tdx: Add extra memory to TDX module for the extensions Xu Yilun
2026-10-05 17:41 ` [PATCH v3 4/6] x86/virt/tdx: Make TDX module initialize " Xu Yilun
2026-10-05 17:41 ` [PATCH v3 5/6] x86/virt/tdx: Re-initialize the extensions on runtime TDX module update Xu Yilun
2026-10-06 4:32 ` Tony Lindgren
2026-10-05 17:41 ` [PATCH v3 6/6] x86/virt/tdx: Support DPAMT when adding memory for the extensions Xu Yilun
2026-10-06 4:36 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261006-tdx-module-ext-v3-2-db52cb05b918@linux.intel.com \
--to=yilun.xu@linux.intel.com \
--cc=adrian.hunter@intel.com \
--cc=artem.bityutskiy@linux.intel.com \
--cc=baolu.lu@linux.intel.com \
--cc=chao.gao@intel.com \
--cc=dave.hansen@intel.com \
--cc=dave.hansen@linux.intel.com \
--cc=kas@kernel.org \
--cc=kishen.maloor@intel.com \
--cc=kvm@vger.kernel.org \
--cc=linux-coco@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=nik.borisov@suse.com \
--cc=peter.fang@intel.com \
--cc=rick.p.edgecombe@intel.com \
--cc=sohil.mehta@intel.com \
--cc=tony.lindgren@linux.intel.com \
--cc=x86@kernel.org \
--cc=xiaoyao.li@intel.com \
--cc=yilun.xu@intel.com \
--cc=zhenzhong.duan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®