From: Hemanth Selam <hemanth.selam@gmail.com>
To: Aaro Koskinen <aaro.koskinen@iki.fi>,
Andreas Kemnade <andreas@kemnade.info>,
Kevin Hilman <khilman@baylibre.com>,
Roger Quadros <rogerq@kernel.org>,
Tony Lindgren <tony@atomide.com>,
Russell King <linux@armlinux.org.uk>,
Paul Walmsley <paul@pwsan.com>
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2] ARM: OMAP2+: fix typos in comments
Date: Tue, 6 Oct 2026 11:31:39 +0530 [thread overview]
Message-ID: <20261006060141.43425-1-hemanth.selam@gmail.com> (raw)
Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. One further misspelling of
"peripherals" in powerdomains7xx_data.c is fixed as well: it is not in
scripts/spelling.txt, but it sits on the same comment line as one that
checkpatch does report. Only comments are touched, there are no code
changes.
Assisted-by: LLM
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
---
Notes (v2):
v2:
- Split the single "ARM: fix typos in comments" patch up per platform,
so that each one can be picked up by its own maintainer.
- Also fix the second misspelling on the same comment line in
powerdomains7xx_data.c, which checkpatch does not report because it
is not listed in scripts/spelling.txt.
v1: https://lore.kernel.org/all/20260907064849.23086-1-hemanth.selam@gmail.com/
arch/arm/mach-omap2/omap4-common.c | 2 +-
arch/arm/mach-omap2/omap_hwmod.c | 6 +++---
arch/arm/mach-omap2/powerdomains7xx_data.c | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 5d924b85b694..633451b6f548 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -96,7 +96,7 @@ static void omap4_mb(void)
* interconnects.
*
* This situation can happen only when the idle is initiated by a Master
- * Request Disconnection (which is trigged by software when executing WFI
+ * Request Disconnection (which is triggered by software when executing WFI
* on the CPU).
*
* The work-around for this errata needs all the initiators connected
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 03cd523dff87..0f4ba19804c6 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -646,7 +646,7 @@ static struct clockdomain *_get_clkdm(struct omap_hwmod *oh)
* @oh: struct omap_hwmod *
*
* Prevent the hardware module @oh from entering idle while the
- * hardare module initiator @init_oh is active. Useful when a module
+ * hardware module initiator @init_oh is active. Useful when a module
* will be accessed by a particular initiator (e.g., if a module will
* be accessed by the IVA, there should be a sleepdep between the IVA
* initiator and the module). Only applies to modules in smart-idle
@@ -674,7 +674,7 @@ static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
* _del_initiator_dep: allow @oh to smart-idle even if @init_oh is active
* @oh: struct omap_hwmod *
*
- * Allow the hardware module @oh to enter idle while the hardare
+ * Allow the hardware module @oh to enter idle while the hardware
* module initiator @init_oh is active. Useful when a module will not
* be accessed by a particular initiator (e.g., if a module will not
* be accessed by the IVA, there should be no sleepdep between the IVA
@@ -1706,7 +1706,7 @@ static int _ocp_softreset(struct omap_hwmod *oh)
return -EINVAL;
}
- /* For some modules, all optionnal clocks need to be enabled as well */
+ /* For some modules, all optional clocks need to be enabled as well */
if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
_enable_optional_clocks(oh);
diff --git a/arch/arm/mach-omap2/powerdomains7xx_data.c b/arch/arm/mach-omap2/powerdomains7xx_data.c
index 921cb1b29cb4..18cd74915b4b 100644
--- a/arch/arm/mach-omap2/powerdomains7xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains7xx_data.c
@@ -223,7 +223,7 @@ static struct powerdomain mpu_7xx_pwrdm = {
},
};
-/* l3init_7xx_pwrdm: L3 initators pheripherals power domain */
+/* l3init_7xx_pwrdm: L3 initiators peripherals power domain */
static struct powerdomain l3init_7xx_pwrdm = {
.name = "l3init_pwrdm",
.prcm_offs = DRA7XX_PRM_L3INIT_INST,
--
2.47.3
reply other threads:[~2026-10-06 6:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261006060141.43425-1-hemanth.selam@gmail.com \
--to=hemanth.selam@gmail.com \
--cc=aaro.koskinen@iki.fi \
--cc=andreas@kemnade.info \
--cc=khilman@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=paul@pwsan.com \
--cc=rogerq@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®