On Mon, Oct 05, 2026 at 04:44:19PM +0200, Thomas Bonnefille wrote:
> The TMP117 can send alerts when the temperature crosses a low or high
> limit. This triggers an interrupt on the ALERT pin.
> 
> Add the optional interrupts property.
> 
> Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
> ---
>  Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
> index 7fb3e68207919..68ee936722ded 100644
> --- a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
> +++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
> @@ -30,6 +30,11 @@ properties:
>    reg:
>      maxItems: 1
>  
> +  interrupts:
> +    description: |

Valid comment here, but I wouldn't respin for it.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable

Cheers,
COnor,

> +      Interrupt line connected to the ALERT output of the sensor.
> +    maxItems: 1
> +
>    vcc-supply:
>      description: provide VCC power to the sensor.
>  
> @@ -45,6 +50,8 @@ additionalProperties: false
>  
>  examples:
>    - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
>      i2c {
>          #address-cells = <1>;
>          #size-cells = <0>;
> @@ -52,6 +59,8 @@ examples:
>          tmp117@48 {
>              compatible = "ti,tmp117";
>              reg = <0x48>;
> +            interrupt-parent = <&gpio0>;
> +            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
>              vcc-supply = <&pmic_reg_3v3>;
>          };
>      };
> 
> -- 
> 2.55.0
>