From: Vinayak Katoch <vinayak.katoch@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Abel Vesa <abelvesa@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>,
Bharath Kumar <bkumar@qti.qualcomm.com>,
Chenna Kesava Raju <chennak@qti.qualcomm.com>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Vinayak Katoch <vinayak.katoch@oss.qualcomm.com>
Subject: [PATCH 2/2] arm64: dts: qcom: glymur: add CDSP FastRPC extended context bank
Date: Wed, 07 Oct 2026 21:24:55 +0530 [thread overview]
Message-ID: <20261007-extended-mapping-dts-v1-2-b52eb8c3613d@oss.qualcomm.com> (raw)
In-Reply-To: <20261007-extended-mapping-dts-v1-0-b52eb8c3613d@oss.qualcomm.com>
Wire up compute-cb@12 as the dedicated extended IOVA context bank by
adding iommu-ranges = <0x4 0x0 0xfc 0x0>, restricting allocations to
the [16 GiB, ~1 TiB) window. This allows large CDSP buffers to be
mapped beyond the standard 34-bit limit.
Bump #address-cells and #size-cells to <2> on the fastrpc and glink
ancestor nodes to accommodate 64-bit iommu-ranges values, and update
all compute-cb reg entries to the four-cell format accordingly.
Signed-off-by: Vinayak Katoch <vinayak.katoch@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/glymur.dtsi | 31 ++++++++++++++++++-------------
1 file changed, 18 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index 65a398c0a992..556867fbf197 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -8462,6 +8462,8 @@ remoteproc_cdsp: remoteproc@32300000 {
qcom,qmp = <&aoss_qmp>;
qcom,smem-states = <&smp2p_cdsp_out 0>;
qcom,smem-state-names = "stop";
+ #address-cells = <2>;
+ #size-cells = <2>;
status = "disabled";
@@ -8473,17 +8475,19 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
IPCC_MPROC_SIGNAL_GLINK_QMP>;
qcom,remote-pid = <5>;
label = "cdsp";
+ #address-cells = <2>;
+ #size-cells = <2>;
fastrpc {
compatible = "qcom,glymur-fastrpc", "qcom,kaanapali-fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
label = "cdsp";
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
compute-cb@1 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <1>;
+ reg = <0x0 0x1 0x0 0x0>;
iommus = <&apps_smmu 0x2401 0x440>,
<&apps_smmu 0x1961 0x0>,
@@ -8493,7 +8497,7 @@ compute-cb@1 {
compute-cb@2 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <2>;
+ reg = <0x0 0x2 0x0 0x0>;
iommus = <&apps_smmu 0x2402 0x440>,
<&apps_smmu 0x1962 0x0>,
@@ -8503,7 +8507,7 @@ compute-cb@2 {
compute-cb@3 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <3>;
+ reg = <0x0 0x3 0x0 0x0>;
iommus = <&apps_smmu 0x2403 0x440>,
<&apps_smmu 0x1963 0x0>,
@@ -8513,7 +8517,7 @@ compute-cb@3 {
compute-cb@4 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <4>;
+ reg = <0x0 0x4 0x0 0x0>;
iommus = <&apps_smmu 0x2404 0x440>,
<&apps_smmu 0x1964 0x0>,
@@ -8523,7 +8527,7 @@ compute-cb@4 {
compute-cb@5 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <5>;
+ reg = <0x0 0x5 0x0 0x0>;
iommus = <&apps_smmu 0x2405 0x440>,
<&apps_smmu 0x1965 0x0>,
@@ -8533,7 +8537,7 @@ compute-cb@5 {
compute-cb@6 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <6>;
+ reg = <0x0 0x6 0x0 0x0>;
iommus = <&apps_smmu 0x2406 0x440>,
<&apps_smmu 0x1966 0x0>,
@@ -8543,7 +8547,7 @@ compute-cb@6 {
compute-cb@7 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <7>;
+ reg = <0x0 0x7 0x0 0x0>;
iommus = <&apps_smmu 0x2407 0x440>,
<&apps_smmu 0x1967 0x0>,
@@ -8553,7 +8557,7 @@ compute-cb@7 {
compute-cb@8 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <8>;
+ reg = <0x0 0x8 0x0 0x0>;
iommus = <&apps_smmu 0x2408 0x440>,
<&apps_smmu 0x1968 0x0>,
@@ -8565,7 +8569,7 @@ compute-cb@8 {
compute-cb@10 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <10>;
+ reg = <0x0 0xa 0x0 0x0>;
iommus = <&apps_smmu 0x240c 0x440>,
<&apps_smmu 0x196c 0x0>,
@@ -8575,7 +8579,7 @@ compute-cb@10 {
compute-cb@11 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <11>;
+ reg = <0x0 0xb 0x0 0x0>;
iommus = <&apps_smmu 0x240d 0x440>,
<&apps_smmu 0x196d 0x0>,
@@ -8585,11 +8589,12 @@ compute-cb@11 {
compute-cb@12 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <12>;
+ reg = <0x0 0xc 0x0 0x0>;
iommus = <&apps_smmu 0x240e 0x440>,
<&apps_smmu 0x196e 0x0>,
<&apps_smmu 0x19ce 0x0>;
+ iommu-ranges = <0x4 0x0 0xfc 0x0>;
dma-coherent;
};
};
--
2.34.1
prev parent reply other threads:[~2026-10-07 15:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-07 15:54 [PATCH 0/2] arm64: dts: qcom: " Vinayak Katoch
2026-10-07 15:54 ` [PATCH 1/2] arm64: dts: qcom: kaanapali: " Vinayak Katoch
2026-10-07 15:54 ` Vinayak Katoch [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261007-extended-mapping-dts-v1-2-b52eb8c3613d@oss.qualcomm.com \
--to=vinayak.katoch@oss.qualcomm.com \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=bkumar@qti.qualcomm.com \
--cc=chennak@qti.qualcomm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=ekansh.gupta@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®