From: Vinayak Katoch <vinayak.katoch@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Abel Vesa <abelvesa@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>,
Bharath Kumar <bkumar@qti.qualcomm.com>,
Chenna Kesava Raju <chennak@qti.qualcomm.com>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Vinayak Katoch <vinayak.katoch@oss.qualcomm.com>
Subject: [PATCH v2 1/2] arm64: dts: qcom: kaanapali: add CDSP FastRPC extended context bank
Date: Wed, 07 Oct 2026 22:43:19 +0530 [thread overview]
Message-ID: <20261007-extended-mapping-dts-v2-1-fa9e14900313@oss.qualcomm.com> (raw)
In-Reply-To: <20261007-extended-mapping-dts-v2-0-fa9e14900313@oss.qualcomm.com>
Wire up compute-cb@13 as the dedicated extended IOVA context bank by
adding iommu-ranges = <0x4 0x0 0xfc 0x0>, restricting allocations to
the [16 GiB, ~1 TiB) window. This allows large CDSP buffers to be
mapped beyond the standard 34-bit limit.
Bump #address-cells and #size-cells to <2> on the fastrpc and glink
ancestor nodes to accommodate 64-bit iommu-ranges values, and update
all compute-cb reg entries to the four-cell format accordingly.
Signed-off-by: Vinayak Katoch <vinayak.katoch@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/kaanapali.dtsi | 29 +++++++++++++++++------------
1 file changed, 17 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/kaanapali.dtsi b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
index 146eaf9f0b9a..2b00a813414e 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali.dtsi
+++ b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
@@ -6304,6 +6304,8 @@ remoteproc_cdsp: remoteproc@26300000 {
qcom,qmp = <&aoss_qmp>;
qcom,smem-states = <&smp2p_cdsp_out 0>;
qcom,smem-state-names = "stop";
+ #address-cells = <2>;
+ #size-cells = <2>;
status = "disabled";
@@ -6315,17 +6317,19 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
IPCC_MPROC_SIGNAL_GLINK_QMP>;
qcom,remote-pid = <5>;
label = "cdsp";
+ #address-cells = <2>;
+ #size-cells = <2>;
fastrpc {
compatible = "qcom,kaanapali-fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
label = "cdsp";
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
compute-cb@1 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <1>;
+ reg = <0x0 0x1 0x0 0x0>;
iommus = <&apps_smmu 0x19c1 0x0>,
<&apps_smmu 0x1961 0x0>,
<&apps_smmu 0x0c21 0x0>,
@@ -6335,7 +6339,7 @@ compute-cb@1 {
compute-cb@2 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <2>;
+ reg = <0x0 0x2 0x0 0x0>;
iommus = <&apps_smmu 0x1962 0x0>,
<&apps_smmu 0x0c02 0x20>,
<&apps_smmu 0x0c42 0x0>,
@@ -6345,7 +6349,7 @@ compute-cb@2 {
compute-cb@3 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <3>;
+ reg = <0x0 0x3 0x0 0x0>;
iommus = <&apps_smmu 0x1963 0x0>,
<&apps_smmu 0x0c23 0x0>,
<&apps_smmu 0x0c03 0x40>,
@@ -6355,7 +6359,7 @@ compute-cb@3 {
compute-cb@4 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <4>;
+ reg = <0x0 0x4 0x0 0x0>;
iommus = <&apps_smmu 0x1964 0x0>,
<&apps_smmu 0x0c44 0x0>,
<&apps_smmu 0x0c04 0x20>,
@@ -6365,7 +6369,7 @@ compute-cb@4 {
compute-cb@5 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <5>;
+ reg = <0x0 0x5 0x0 0x0>;
iommus = <&apps_smmu 0x1965 0x0>,
<&apps_smmu 0x0c45 0x0>,
<&apps_smmu 0x0c05 0x20>,
@@ -6375,7 +6379,7 @@ compute-cb@5 {
compute-cb@6 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <6>;
+ reg = <0x0 0x6 0x0 0x0>;
iommus = <&apps_smmu 0x1966 0x0>,
<&apps_smmu 0x0c06 0x20>,
<&apps_smmu 0x0c46 0x0>,
@@ -6385,7 +6389,7 @@ compute-cb@6 {
compute-cb@7 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <7>;
+ reg = <0x0 0x7 0x0 0x0>;
iommus = <&apps_smmu 0x1967 0x0>,
<&apps_smmu 0x0c27 0x0>,
<&apps_smmu 0x0c07 0x40>,
@@ -6395,7 +6399,7 @@ compute-cb@7 {
compute-cb@8 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <8>;
+ reg = <0x0 0x8 0x0 0x0>;
iommus = <&apps_smmu 0x1968 0x0>,
<&apps_smmu 0x0c08 0x20>,
<&apps_smmu 0x0c48 0x0>,
@@ -6405,7 +6409,7 @@ compute-cb@8 {
compute-cb@12 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <12>;
+ reg = <0x0 0xc 0x0 0x0>;
iommus = <&apps_smmu 0x196c 0x0>,
<&apps_smmu 0x0c2c 0x00>,
<&apps_smmu 0x0c0c 0x40>,
@@ -6415,12 +6419,13 @@ compute-cb@12 {
compute-cb@13 {
compatible = "qcom,fastrpc-compute-cb";
- reg = <13>;
+ reg = <0x0 0xd 0x0 0x0>;
iommus = <&apps_smmu 0x196d 0x0>,
<&apps_smmu 0x0c0d 0x40>,
<&apps_smmu 0x0c2e 0x0>,
<&apps_smmu 0x0c2d 0x0>,
<&apps_smmu 0x19cd 0x0>;
+ iommu-ranges = <0x4 0x0 0xfc 0x0>;
dma-coherent;
};
};
--
2.34.1
next prev parent reply other threads:[~2026-10-07 17:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-07 17:13 [PATCH v2 0/2] arm64: dts: qcom: " Vinayak Katoch
2026-10-07 17:13 ` Vinayak Katoch [this message]
2026-10-07 17:13 ` [PATCH v2 2/2] arm64: dts: qcom: glymur: " Vinayak Katoch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261007-extended-mapping-dts-v2-1-fa9e14900313@oss.qualcomm.com \
--to=vinayak.katoch@oss.qualcomm.com \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=bkumar@qti.qualcomm.com \
--cc=chennak@qti.qualcomm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=ekansh.gupta@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®