mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Svyatoslav Ryhel <clamor95@gmail.com>
To: Lee Jones <lee@kernel.org>, Pavel Machek <pavel@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Svyatoslav Ryhel <clamor95@gmail.com>,
	Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v1 3/3] leds: aat1290: Add support for AAT1270 Current Regulator for Flash LEDs
Date: Wed,  7 Oct 2026 11:54:57 +0300	[thread overview]
Message-ID: <20261007085457.98762-4-clamor95@gmail.com> (raw)
In-Reply-To: <20261007085457.98762-1-clamor95@gmail.com>

The AAT1270 is quite similar to the AAT1290, but it does not support the
Advanced Simple Serial Control (AS2C) used in the AAT1290. The AAT1270
uses an earlier version of AS2C, namely Simple Serial Control, which lacks
address-sending capabilities.

Differentiate the chips by using a description structure with a flag to
indicate if AS2C is supported, placing all AS2C-only features under a
conditional check.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/leds/flash/leds-aat1290.c | 66 ++++++++++++++++++++++---------
 1 file changed, 47 insertions(+), 19 deletions(-)

diff --git a/drivers/leds/flash/leds-aat1290.c b/drivers/leds/flash/leds-aat1290.c
index 49251cfd33509..773cdcc73a9e1 100644
--- a/drivers/leds/flash/leds-aat1290.c
+++ b/drivers/leds/flash/leds-aat1290.c
@@ -43,9 +43,6 @@
 #define AAT1290_FLASH_TM_NUM_LEVELS	16
 #define AAT1290_MM_CURRENT_SCALE_SIZE	15
 
-#define AAT1290_NAME			"aat1290"
-
-
 struct aat1290_led_config_data {
 	/* maximum LED current in movie mode */
 	u32 max_mm_current;
@@ -59,6 +56,13 @@ struct aat1290_led_config_data {
 	enum led_brightness max_brightness;
 };
 
+struct aat1290_led_chip_info {
+	/* led controller name */
+	const char *name;
+	/* Advanced Simple Serial Control support */
+	bool as2c;
+};
+
 struct aat1290_led {
 	/* platform device data */
 	struct platform_device *pdev;
@@ -74,6 +78,10 @@ struct aat1290_led {
 	struct gpio_desc *gpio_fl_en;
 	/* EN|SET pin  */
 	struct gpio_desc *gpio_en_set;
+
+	/* led controller description */
+	const struct aat1290_led_chip_info *info;
+
 	/* movie mode current scale */
 	int *mm_current_scale;
 	/* device mode */
@@ -101,15 +109,17 @@ static void aat1290_as2cwire_write(struct aat1290_led *led, int addr, int value)
 
 	udelay(AAT1290_FLEN_OFF_DELAY_TIME_US);
 
-	/* write address */
-	for (i = 0; i < addr; ++i) {
-		udelay(AAT1290_EN_SET_TICK_TIME_US);
-		gpiod_direction_output(led->gpio_en_set, 0);
-		udelay(AAT1290_EN_SET_TICK_TIME_US);
-		gpiod_direction_output(led->gpio_en_set, 1);
-	}
+	if (led->info->as2c) {
+		/* write address */
+		for (i = 0; i < addr; ++i) {
+			udelay(AAT1290_EN_SET_TICK_TIME_US);
+			gpiod_direction_output(led->gpio_en_set, 0);
+			udelay(AAT1290_EN_SET_TICK_TIME_US);
+			gpiod_direction_output(led->gpio_en_set, 1);
+		}
 
-	usleep_range(AAT1290_LATCH_TIME_MIN_US, AAT1290_LATCH_TIME_MAX_US);
+		usleep_range(AAT1290_LATCH_TIME_MIN_US, AAT1290_LATCH_TIME_MAX_US);
+	}
 
 	/* write data */
 	for (i = 0; i < value; ++i) {
@@ -150,16 +160,18 @@ static int aat1290_led_brightness_set(struct led_classdev *led_cdev,
 		led->movie_mode = false;
 	} else {
 		if (!led->movie_mode) {
-			aat1290_as2cwire_write(led,
-				AAT1290_MM_CURRENT_RATIO_ADDR,
-				AAT1290_MM_TO_FL_1_92);
+			if (led->info->as2c)
+				aat1290_as2cwire_write(led,
+					AAT1290_MM_CURRENT_RATIO_ADDR,
+					AAT1290_MM_TO_FL_1_92);
 			led->movie_mode = true;
 		}
 
 		aat1290_as2cwire_write(led, AAT1290_MOVIE_MODE_CURRENT_ADDR,
 				AAT1290_MAX_MM_CURR_PERCENT_0 - brightness);
-		aat1290_as2cwire_write(led, AAT1290_MOVIE_MODE_CONFIG_ADDR,
-				AAT1290_MOVIE_MODE_ON);
+		if (led->info->as2c)
+			aat1290_as2cwire_write(led, AAT1290_MOVIE_MODE_CONFIG_ADDR,
+					       AAT1290_MOVIE_MODE_ON);
 	}
 
 	mutex_unlock(&led->lock);
@@ -178,7 +190,8 @@ static int aat1290_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
 	mutex_lock(&led->lock);
 
 	if (state) {
-		aat1290_set_flash_safety_timer(led, timeout->val);
+		if (led->info->as2c)
+			aat1290_set_flash_safety_timer(led, timeout->val);
 		gpiod_direction_output(led->gpio_fl_en, 1);
 	} else {
 		gpiod_direction_output(led->gpio_fl_en, 0);
@@ -475,6 +488,10 @@ static int aat1290_led_probe(struct platform_device *pdev)
 	fled_cdev->ops = &flash_ops;
 	led_cdev = &fled_cdev->led_cdev;
 
+	led->info = device_get_match_data(dev);
+	if (!led->info)
+		return -ENODEV;
+
 	ret = aat1290_led_get_configuration(led, &led_cfg, &sub_node);
 	if (ret < 0)
 		return ret;
@@ -489,7 +506,7 @@ static int aat1290_led_probe(struct platform_device *pdev)
 	aat1290_init_flash_timeout(led, &led_cfg);
 
 	init_data.fwnode = of_fwnode_handle(sub_node);
-	init_data.devicename = AAT1290_NAME;
+	init_data.devicename = led->info->name;
 
 	/* Register LED Flash class device */
 	ret = led_classdev_flash_register_ext(&pdev->dev, fled_cdev,
@@ -528,8 +545,19 @@ static void aat1290_led_remove(struct platform_device *pdev)
 	mutex_destroy(&led->lock);
 }
 
+static const struct aat1290_led_chip_info aat1290_info = {
+	.name = "aat1290",
+	.as2c = true,
+};
+
+static const struct aat1290_led_chip_info aat1270_info = {
+	.name = "aat1270",
+	.as2c = false,
+};
+
 static const struct of_device_id aat1290_led_dt_match[] = {
-	{ .compatible = "skyworks,aat1290" },
+	{ .compatible = "skyworks,aat1290", .data = &aat1290_info },
+	{ .compatible = "skyworks,aat1270", .data = &aat1270_info },
 	{},
 };
 MODULE_DEVICE_TABLE(of, aat1290_led_dt_match);
-- 
2.53.0


  parent reply	other threads:[~2026-10-07  8:55 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-07  8:54 [PATCH v1 0/3] leds: aat1290: Add support for AAT1270 Svyatoslav Ryhel
2026-10-07  8:54 ` [PATCH v1 1/3] dt-bindings: leds: skyworks,aat1290: Document AAT1270 Current Regulator for Flash LEDs Svyatoslav Ryhel
2026-10-07  8:54 ` [PATCH v1 2/3] dt-bindings: leds: skyworks,aat1290: Document FLINH pin Svyatoslav Ryhel
2026-10-07  8:54 ` Svyatoslav Ryhel [this message]
2026-10-07 19:04   ` [PATCH v1 3/3] leds: aat1290: Add support for AAT1270 Current Regulator for Flash LEDs Jacek Anaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261007085457.98762-4-clamor95@gmail.com \
    --to=clamor95@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jacek.anaszewski@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=lee@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®