On Thu, Oct 08, 2026 at 09:14:34AM +0200, Khristine Andreea Barbulescu wrote:
> The SIUL2 external interrupt lines (EIRQ0-EIRQ31) on S32G2/S32G3 are not
> hard-wired to fixed pads. Each EIRQ line has its own input multiplexer,
> implemented by the IMCR398-IMCR429 registers, whose Source Signal Select
> (SSS) field selects which pad signal feeds the edge detector.
> 
> These registers were previously listed as reserved and were absent from
> the reg list. Add a dedicated entry for the IMCR398-IMCR429 EIRQ input
> multiplexer window between the two regular IMCR groups, update the
> example and the minimum item count for the GPIO/EIRQ variant, and drop
> IMCR398-IMCR429 from the reserved-index note.
> 
> Signed-off-by: Khristine Andreea Barbulescu <khristineandreea.barbulescu@oss.nxp.com>
> ---
>  .../bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml        | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml
> index 36f2393fa406..ecf6d61a80e9 100644
> --- a/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml
> @@ -23,7 +23,9 @@ description: |
>    are used for external interrupt configuration.
>  
>    Please note that some register indexes are reserved in S32G2, such as
> -  MSCR102-MSCR111, MSCR123-MSCR143, IMCR84-IMCR118 and IMCR398-IMCR429.
> +  MSCR102-MSCR111, MSCR123-MSCR143 and IMCR84-IMCR118. IMCR398-IMCR429
> +  are not regular pin IMCRs but the EIRQ input multiplexer registers,
> +  which select the pad signal routed to each external interrupt line.
>  
>  properties:
>    compatible:
> @@ -53,6 +55,7 @@ properties:
>        - description: MSCR registers group 2 in SIUL2_1
>        - description: IMCR registers group 0 in SIUL2_0
>        - description: IMCR registers group 1 in SIUL2_1
> +      - description: IMCR398-IMCR429 EIRQ input multiplexer registers in SIUL2_1

Isn't mid-list insertion here a compatibility break, since there's no
reg-names property here? Seems like this can just be added at the end,
without an impact on existing users?

>        - description: IMCR registers group 2 in SIUL2_1
>        - description: PGPDO registers in SIUL2_0
>        - description: PGPDI registers in SIUL2_0
> @@ -141,7 +144,7 @@ oneOf:
>        - interrupts
>      properties:
>        reg:
> -        minItems: 11
> +        minItems: 12

Why is the new reg mandatory? I didn't catch the explanation for that.

Thanks,
Conor.

>  
>  additionalProperties: false
>  
> @@ -162,6 +165,8 @@ examples:
>                <0x4009ca40 0x150>,
>                /* IMCR119-IMCR397 registers on siul2_1 */
>                <0x44010c1c 0x45c>,
> +              /* IMCR398-IMCR429 (EIRQ input mux) on siul2_1 */
> +              <0x44011078 0x80>,
>                /* IMCR430-IMCR495 registers on siul2_1 */
>                <0x440110f8 0x108>,
>                /* PGPDO registers on siul2_0 */
> -- 
> 2.34.1
>