[PATCH 6/6] ASoC: nau8822: Fix the 128x oversampling switch bits

[HyeongJun An <sammiee5311@gmail.com>]

The DAC and ADC 128x Oversampling Switches use bit 5 of R10 and R14.
The NAU8822 datasheet register map puts DACOS and ADCOS at bit 3 of
those registers.

In R14, bit 5 is inside HPF[6:4], which the High Pass Cut Off control
owns. So turning on ADC oversampling changes the high pass cut-off, and
the oversampling bit cannot be set. In R10, bit 5 is reserved, so the
DAC switch has no effect.

Use bit 3 for both.

Fixes: 1e3cb6c321be ("ASoC: nau8822: new codec driver")
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
---
 sound/soc/codecs/nau8822.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/nau8822.c b/sound/soc/codecs/nau8822.c
index db1931d7b901..d91a0bed2025 100644
--- a/sound/soc/codecs/nau8822.c
+++ b/sound/soc/codecs/nau8822.c
@@ -383,9 +383,9 @@ static const struct snd_kcontrol_new nau8822_snd_controls[] = {
 		NAU8822_REG_RIGHT_ADC_BOOST_CONTROL, 0, 7, 0, boost_tlv),
 
 	SOC_SINGLE("DAC 128x Oversampling Switch",
-		NAU8822_REG_DAC_CONTROL, 5, 1, 0),
+		NAU8822_REG_DAC_CONTROL, 3, 1, 0),
 	SOC_SINGLE("ADC 128x Oversampling Switch",
-		NAU8822_REG_ADC_CONTROL, 5, 1, 0),
+		NAU8822_REG_ADC_CONTROL, 3, 1, 0),
 };
 
 /* LMAIN and RMAIN Mixer */
-- 
2.43.0