mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jennifer Berringer <jberring@redhat.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@kernel.org>
Cc: devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	spacemit@lists.linux.dev, linux-kernel@vger.kernel.org,
	Jennifer Berringer <jberring@redhat.com>
Subject: [PATCH] riscv: dts: spacemit: enable USB2.0 controllers on Milk-V Jupiter
Date: Fri,  9 Oct 2026 22:03:17 -0400	[thread overview]
Message-ID: <20261009-jupiter-usb2-v1-1-ab84a00d3b64@redhat.com> (raw)

On Milk-V Jupiter boards, usb2_0 is connected to a Type-C connector
which cannot act as a power source. That port can act as USB host if
connected to a self-powered hub.

usb2_1 has vbus output controlled by gpio 127 and is connected to a
FE1.1s hub, which drives four ports: two rear Type-A receptacles and a
9-pin header for two chassis ports.

Signed-off-by: Jennifer Berringer <jberring@redhat.com>
---
This patch depends on
https://lore.kernel.org/spacemit/20261009-b4-spacemit-k1-usb2-v4-0-2d98e5324d9a@linux.spacemit.com/

This conflicts with the Jupiter M1 patch set but can be applied on top
of it if all instances of "k1-milkv-jupiter.dts" in this diff are
replaced with "k1-milkv-jupiter-common.dtsi"
---
 arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts | 35 +++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
index 635e95aad14a5..913c2170bf6a2 100644
--- a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
@@ -82,6 +82,16 @@ reg_vcc_5v: regulator-vcc-5v {
 		vin-supply = <&reg_dc_in>;
 	};
 
+	reg_usb2_vbus: regulator-usb2-vbus-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "USB20_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc_5v>;
+		gpio = <&gpio K1_GPIO(127) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	regulator-usb3-vbus-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "USB30_VBUS";
@@ -443,10 +453,35 @@ &uart0 {
 	status = "okay";
 };
 
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
 &usbphy2 {
 	status = "okay";
 };
 
+&usb2_0 {
+	status = "okay";
+};
+
+&usb2_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+
+	hub_2_1: hub@1 {
+		compatible = "usb1a40,0101";
+		reg = <1>;
+		vdd-supply = <&pcie_vcc_3v3>;
+	};
+};
+
 &usb_dwc3 {
 	dr_mode = "host";
 	#address-cells = <1>;

---
base-commit: e5e04726cdd043e309677071ab1b65a4b18f422b
change-id: 20261009-jupiter-usb2-b888e544520a
prerequisite-change-id: 20260812-b4-spacemit-k1-usb2-97adfc283d58:v4
prerequisite-patch-id: ccc56cd7363a39566f74b3628fbe2ccf01c76774
prerequisite-patch-id: ee646b8712bc41793579b8abc30d8d3f616d36e7
prerequisite-patch-id: 793abd51f18ae96cc2cbcb447721ca9ae1e6fa49
prerequisite-patch-id: 67bf74a44fd81390c82c07921d808a58a5211fb7
prerequisite-patch-id: 801c65013a1e55dfdbf3d3b061752ddb972afb18
prerequisite-patch-id: 2321f949dcfb2609932da94cabc969812f11669f
prerequisite-patch-id: 0843cac1ae192e99f2562f5ac882dfc4f9a10637
prerequisite-patch-id: 7ce394f4284c628b7d6187d8ee555726c94675ad

Best regards,
-- 
Jennifer Berringer <jberring@redhat.com>


                 reply	other threads:[~2026-10-10  2:05 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261009-jupiter-usb2-v1-1-ab84a00d3b64@redhat.com \
    --to=jberring@redhat.com \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlan@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=robh@kernel.org \
    --cc=spacemit@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®