From: David Laight <david.laight.linux@gmail.com>
To: Borislav Petkov <bp@alien8.de>
Cc: Nikola Ciprich <nikola.ciprich@linuxbox.cz>,
Rik van Riel <riel@surriel.com>,
ljs@kernel.org, linux-mm@kvack.org, linux-kernel@vger.kernel.org,
akpm@linux-foundation.org, david@kernel.org,
Mike Rapoport <rppt@kernel.org>,
Dave Hansen <dave.hansen@linux.intel.com>,
Pedro Falcato <pfalcato@suse.de>,
Kiryl Shutsemau <kas@kernel.org>,
luizcap@redhat.com, pbonzini@redhat.com,
Tal Zussman <tz2294@columbia.edu>,
Matt Fleming <matt@readmodwrite.com>
Subject: Re: hunting memory corruption bug in 6.18.x
Date: Fri, 9 Oct 2026 09:00:42 +0100 [thread overview]
Message-ID: <20261009090042.39ba9c06@pumpkin> (raw)
In-Reply-To: <20261008182356.GBasffvDuTemTu1VUY@fat_crate.local>
On Thu, 8 Oct 2026 11:23:56 -0700
Borislav Petkov <bp@alien8.de> wrote:
> On Thu, Oct 08, 2026 at 02:29:36PM +0200, Nikola Ciprich wrote:
> > [11402.940943] BUG: unable to handle page fault for address: ffffffff0c93001c
> > [11402.942273] #PF: supervisor read access in kernel mode
> > [11402.943629] #PF: error_code(0x0000) - not-present page
> > [11402.945025] PGD 6d6f83a067 P4D 6d6f83b067 PUD 0
> > [11402.946469] Oops: Oops: 0000 [#1] SMP NOPTI
> > [11402.947950] CPU: 23 UID: 0 PID: 704950 Comm: servercare-moni Kdump: loaded Tainted: G E 6.18.55lb9.01 #1 PREEMPT(voluntary)
> > [11402.951254] Tainted: [E]=UNSIGNED_MODULE
> > [11402.952913] Hardware name: ASUSTeK COMPUTER INC. RS720A-E12-RS12/K14PP-D24 Series, BIOS 1201 08/25/2023
> > [11402.956569] RIP: 0010:__d_lookup_rcu+0x4d/0xe0
> > [11402.958452] Code: 48 8d 04 c2 f6 07 02 0f 85 a0 00 00 00 48 8b 10 48 89 d0 48 83 e0 fe 48 83 fa 01 77 0d e9 80 00 00 00 48 8b 00 48 85 c0 74 78 <44> 8b 58 fc 48 39 78 10 75 ee 48 83 78 08
>
> What is that kernel?
>
> 6.18.55lb9.01
>
> The other machine has a 6.18.20lb9.03-something one.
>
> How can I look at the vmlinux you're running and the sources?
>
> rIP points to:
>
> [11402.958452] Code: 48 8d 04 c2 f6 07 02 0f 85 a0 00 00 00 48 8b 10 48 89 d0 48 83 e0 fe 48 83 fa 01 77 0d e9 80 00 00 00 48 8b 00 48 85 c0 74 78 <44> 8b 58 fc 48 39 78 10 75 ee 48 83 78 08
> All code
> ========
> 0: 48 8d 04 c2 lea (%rdx,%rax,8),%rax
> 4: f6 07 02 testb $0x2,(%rdi)
> 7: 0f 85 a0 00 00 00 jne 0xad
> d: 48 8b 10 mov (%rax),%rdx
> 10: 48 89 d0 mov %rdx,%rax
> 13: 48 83 e0 fe and $0xfffffffffffffffe,%rax
> 17: 48 83 fa 01 cmp $0x1,%rdx
> 1b: 77 0d ja 0x2a
> 1d: e9 80 00 00 00 jmp 0xa2
That looks like the same hlist loop top as in the other failure.
IIRC the fault has the error address in both %rax and %rdx which
means the invalid value cane from the top of the hash list, not
from following the linked list.
> 22: 48 8b 00 mov (%rax),%rax
> 25: 48 85 c0 test %rax,%rax
> 28: 74 78 je 0xa2
> 2a:* 44 8b 58 fc mov -0x4(%rax),%r11d <-- trapping instruction
> 2e: 48 39 78 10 cmp %rdi,0x10(%rax)
That is the hash compare instruction (that fails in the other function).
Not sure why it reads offset -4 first though - the compiler will have
reordered it from after a condition (just to slow the code down!).
I'd guess there is a container_of() lurking.
David
> 32: 75 ee jne 0x22
> 34: 48 rex.W
> 35: 83 .byte 0x83
> 36: 78 08 js 0x40
>
> I need to be able to pinpoint it back to the source.
>
> I asked the last time:
>
> "Just to rule out any other issues which got fixed in the meantime, can you try
> mainline Linux and see if you can reproduce your observation with it?
>
> If so, you could share your crash core along with debug kernels yadda yadda so
> that I can poke at it.
>
> And before you do, make sure you have the latest BIOS and microcode installed on
> that machine.
>
> Also, where can I find full dmesg and /proc/cpuinfo from those machines which
> trigger this?"
>
> But still nothing.
>
> Imagine this issue has been fixed upstream but you don't have the fix in your
> kernels and we're basically chasing the same thing again...
>
> Sorry, but I have lost my debugging crystal ball which can help me guess what
> the machine does. :\
>
> > so we now know this didn't fixed it. however I didn't have tlbi=ipi set, so I'll
> > now try this.
>
> That won't help either but if you wanna try it.
>
> > any ideas on this new info?
>
> Yes, see above.
>
> Bottomline is: without sufficient debugging data and up-to-date hardware,
> there's not a lot I can do.
>
> Thx.
>
next prev parent reply other threads:[~2026-10-09 8:00 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-25 8:48 Nikola Ciprich
2026-09-25 10:05 ` Lorenzo Stoakes (ARM)
2026-09-25 12:13 ` Lorenzo Stoakes (ARM)
2026-09-26 5:58 ` Nikola Ciprich
2026-09-26 9:32 ` Lorenzo Stoakes (ARM)
2026-09-28 9:05 ` Nikola Ciprich
2026-09-29 19:11 ` Nikola Ciprich
2026-09-30 9:07 ` Lorenzo Stoakes (ARM)
2026-09-30 18:40 ` Nikola Ciprich
2026-10-01 19:40 ` Nikola Ciprich
2026-10-01 22:21 ` David Laight
2026-10-02 9:50 ` Lorenzo Stoakes (ARM)
2026-10-02 14:55 ` Nikola Ciprich
2026-10-02 19:27 ` Lorenzo Stoakes (ARM)
2026-10-04 18:40 ` Nikola Ciprich
2026-10-05 11:25 ` Rik van Riel
2026-10-05 19:02 ` Nikola Ciprich
[not found] ` <20261005132113.43548696@pumpkin>
2026-10-05 19:25 ` Nikola Ciprich
2026-10-08 12:29 ` Nikola Ciprich
2026-10-08 18:23 ` Borislav Petkov
2026-10-08 20:48 ` Nikola Ciprich
2026-10-09 8:00 ` David Laight [this message]
2026-10-02 22:02 ` Borislav Petkov
2026-10-04 18:45 ` Nikola Ciprich
2026-10-05 10:58 ` Rik van Riel
2026-10-05 18:05 ` Nikola Ciprich
2026-09-26 16:02 ` Luiz Capitulino
2026-09-28 8:47 ` Nikola Ciprich
2026-10-04 22:20 ` Rik van Riel
2026-10-05 9:31 ` Nikola Ciprich
2026-10-05 8:31 ` Lance Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261009090042.39ba9c06@pumpkin \
--to=david.laight.linux@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=david@kernel.org \
--cc=kas@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ljs@kernel.org \
--cc=luizcap@redhat.com \
--cc=matt@readmodwrite.com \
--cc=nikola.ciprich@linuxbox.cz \
--cc=pbonzini@redhat.com \
--cc=pfalcato@suse.de \
--cc=riel@surriel.com \
--cc=rppt@kernel.org \
--cc=tz2294@columbia.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®